Home > Discussion Groups > Axis

 

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.


Advertisement
  << Previous Topic | Next Topic >>Return to Index  

Dragon's Panzer IV Ausf C working suspension, has anyone built it yet?

May 15 2008 at 3:41 PM
  (Login GeoffSteer)
Missing-Lynx members
from IP address 70.51.134.42

Hi Guys-
Dragon's Panzer IV Ausf C kit has working suspension. I was wondering what happens when you put the kit down on its suspension after completion? I mean does it sit as it should or does the modeller have to glue any of the moveable parts to prevent the kit dropping on to its belly? I have been studying the instructions and this has me stumped, it is clear where to avoid putting glue if you want to have the suspension articulated/moveable. Put simply, if I just want the tank to sit flat, will the kit do so if I follow the kit instructions exactly and leave the glue off the areas the instuctions say to leave it off of?
I hope all this is clear.
With thanks-
Geoff Steer

 
 Respond to this message   
AuthorReply

(Login atcockle)
MODERATORS ONLY - Axis WWII
72.45.83.60

Re: Dragon's Panzer IV Ausf C working suspension, has anyone built it yet?

May 15 2008, 4:34 PM 

Geoff,

You won't have any problem. The suspension is really just moveable and not really working like the real one as the leaf springs don't flex.

Regards,

Tom


 
 Respond to this message   

(Login tanker3)
Missing-Lynx members
71.146.136.242

Yes it will, ......

May 15 2008, 5:12 PM 

I would also put the wheels on (need not glue) just to make sure it sits flat. I have built this kit but I had to "adjust" the dampers.


    
This message has been edited by tanker3 from IP address 71.146.136.242 on May 15, 2008 5:13 PM


 
 Respond to this message   

(Login GeoffSteer)
Missing-Lynx members
74.12.77.11

Thanks Kingston and Tom n/m

May 15 2008, 5:31 PM 

xx

 
 Respond to this message   

(Login djnick66)
Missing-Lynx members
71.100.204.31

Tracks

May 16 2008, 9:06 AM 

But the kit tracks glue together... making the movable parts sort of moot.

 
 Respond to this message   
Current Topic - Dragon's Panzer IV Ausf C working suspension, has anyone built it yet?
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse