Home > Discussion Groups > Axis

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.


Advertisement

  << Previous Topic | Next Topic >>Return to Index  

R&J hanomag dashboard

November 2 2011 at 12:19 PM
D McKeever  (Login D_McKeever)
from IP address 4.26.34.142

Does this actually correct the dimensional problems with the DML Hanomag. I picked one up on the private sellers message board. I compared with the DML 251/16 kit, and do not see any difference.
If it does not work I acquired a AFV Club Hanomag to use with the parts peculiar to a command version.

 
 Respond to this message   
AuthorReply
David McKeever
(Login D_McKeever)
4.26.34.142

anyone? anyone?

November 3 2011, 9:15 PM 

NT

 
 Respond to this message   
Current Topic - R&J hanomag dashboard
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse