Home > Discussion Groups > Axis

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.


Advertisement

  << Previous Topic | Next Topic >>Return to Index  

Shell Markings

June 9 2017 at 12:47 PM
Blair Quinn  (Login alan345)
Missing-Lynx members
from IP address 198.166.214.5

Apart from markings on ammunition crates and the ever popular 88mm, does any company produce markings for other types of ammunition such as 75mm or 50mm or other?

Thanks in advance;

Blair

 
 Respond to this message   
AuthorReply
Tom Morgan
(Login halbcl2)
Missing-Lynx members
142.160.102.25

The only ones I've found are decals for 7.5cmKwK40 rounds in . . .

June 16 2017, 10:36 AM 

. . . . the DML 7.5cm Pak 40/4 auf RSO kit no. 6640. There are enough for at least 10 rds, (both black & white) plus markings for ammo boxes and tubes.
Other DML kits may have some too.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse