Home > Discussion Groups > Allied

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4.

From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47208&messageid=1113823018
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement

 Return to Index  

Dragon M4 composite PTO hull parts

July 21 2012 at 5:32 PM		   (Login marc_brandes)
Missing-Lynx members
from IP address 195.240.106.24
I'm building the kit mentioned above and have a question on the fitting of parts F5 and F6.
[IMG][linked image][/IMG]

When looking at the image from this walkaround on Prime portal (image 10)
http://www.primeportal.net/tanks/ivan_bouinatchov/m4com_walk.htm
it seems like the plates should be fitted lower and with the longer diagonal away from the hull?

I've made some other changes to the kit,
- changed the lower edge of the turret cheek armor from sloping to sharp. See the same walkaround
- added weldbeads to replace the incomplete ones on the hull sides
- cut away the lower edge of the front of the upper hull, to make it fit behind the bolted strip on the upper part of the transmission cover

best regards,


Marc Brandes

Replace dod in email address

 
 Respond to this message   
Responses

  1. Fit Parts as Shown - Rob Ervin on Jul 23, 8:25 AM
    1. Thank you!! - John Lucas on Jul 24, 6:41 PM
    2. Thanks Rob - Marc Brandes on Jul 25, 5:11 AM
     


Terms and Conditions of Use Report abuse