Home > Discussion Groups > Allied

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4.

From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47208&messageid=1113823018

Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement

 Return to Index  

Question about backdating Tamiya BT42 to a BT7 mod37

July 24 2012 at 2:48 PM
tim roberts  (Login tim.roberts8)
Missing-Lynx members
from IP address 78.147.45.220

I'm doing this using a Komplekt zip turret,as all the parts are in the kit for the hull to be built without Finnish modifications. I just noticed there are 2 kinds of radiator intake cover supplied, these are the ones either side of the main engine hatch, parts E5 & E8 which have angled inner corners (these being extra parts in the BT42 kit)and parts B22 & B23, which are part of the original BT7 model35 kit. Which should I use? It's not very clear on any plans I have.
The Komplekt zip turret is very nice by the way, but I think a little too narrow.


Best Wishes
Tim Roberts

 
 Respond to this message   
Responses

  1. I've worked it out, it's parts E5 & E8. - tim roberts on Jul 25, 2012, 6:37 PM
  2.  


Terms and Conditions of Use
Report abuse