Posts that violate the guidelines or Terms and conditions
of Use of the Missing-lynx.com discussion groups will be erased,
and repeated violation of this policy may result in termination
of the violator's account.
(Login daspanzerman) Missing-Lynx members from IP address 188.8.131.52
I listed a link to a photo of a Russian 7.62 mm nyemeton that I bought from TAHK model, is this gun suppose to feed from the right or left side, it shows the right side on the kit, but the individual guns feed from the left, I hope the link works, I don't really know how to post photos on this site
This message has been edited by daspanzerman from IP address 184.108.40.206 on Jun 15, 2012 11:23 PM
The original post was about which side the machine guns feed on. I then asked about how hard it was to change which side it could use.
You seem to have a problem with all of my posts. Do me a favor and don't read them or respond to them.
I don't know what your problem is but get over it.
(Login tanker635) Missing-Lynx members 220.127.116.11
Re: Original post
June 17 2012, 4:15 AM
No, the original post was about which side the SG-43 fed from. You are the one that took off with the M2 and B-26s, which neither had anything to do with the post and one doesn't have anything to do with armor. What's next? How long is a Unicorn's horn? You'd have a much easier time if you want to go off on another subject by starting your own thread. As you are seeing in many of the other forums, a lot of peole have problems with your ramblings. Just try to keep on subject.
(Login mrneil1964) Missing-Lynx members 18.104.22.168
It's not hard to follow...
June 17 2012, 12:40 PM
SG-43 feed -> .50-cal M2 feed. The M2s were fitted on a lot of allied armor and the feed side was modified for applications like the M16 MGMC. I don't see what the problem is. Oh actually I do...Gary's looking for a reason to be angry again.
(Login zappa93) Missing-Lynx members 22.214.171.124
Gary Owsley is NOT a moderator...
June 17 2012, 7:01 PM
...on this or any other ML forum, thank all that's holy!
Mr. Owsley seems to be dogging Mr. Auer's posts on every DG. Mr. Owsley, if Mr. Auer's posts offend you, it's simple: DON'T OPEN ANY THREAD WITH HIS NAME ON IT. If Owen's questions or his off-center attempts at humor offend you, why BOTHER to open a thread he is partaking in?
Mr. Owsley, what makes you seem to relish confrontation on the tiny screen of your computer? Is it so that you can say what you wish without having to take any real responsibility for your words?
Mr. Owsley, you are not a moderator, a cop or a censor. Why don't YOU keep on topic and not harass posters here with your extreme negativity. If you have something CONSTRUCTIVE to add to any discussion thread, feel free.
Mr. Owsley, almost any time there is a confrontation on ML, you always seem to be the center of it. You should be grateful that the site's REAL moderator's don't decide to back-track and see how much misery you have caused here at ML. If the moderators did, and they were the type of person you seem to be, you'd be outta here.
For the new folks here, Mr. Owsley and I have tangled before; the dance bored me. More recently I have kept silent at Brett's request whenever he has made himself "known". I really don't wish to continue the dance, but "enough is enough". So, Gary, why don't you be a good fellow, Sit down, stroke your cat, take a stress pill, wash it down with a Coors and light up a Winston? And, please, for your own health, avoid any of Owen's posts.
Frank V. De Sisto
This message has been edited by zappa93 from IP address 126.96.36.199 on Jun 17, 2012 7:07 PM