Home > Discussion Groups > Modern

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  


August 9 2017 at 3:30 PM
John Tapsell  (Login John_Tapsell)
Missing-Lynx members
from IP address

Response to Whats up with water bottles taped to antennas?


It's a common way to carry chem lights to ID friendlies at night. The empty bottles provide a simple, clear, waterproof container that can be taped or attached to the aerial - The chem lights can be replaced quickly and easily just by unscrewing the cap of the bottle.

In 1/35 there are a couple of simple ways to replicate the water bottle/chem light.

For a previous project I used a cut-down Academy water bottle from their generic modern clear sprue that they supply in some kits (cut down from the '2 litre' to represent a '1 litre' bottle).

I drilled a hole down into the bottle from the cap end and then filled it with paint (carefully, to avoid getting it on the outside of the bottle). Finally I painted the 'cap' in blue. The whole thing sits upside down on the aerial and was attached with a couple of thin strips of Tamiya tape (pre-painted and cut to length)


[linked image]

 Respond to this message   

Terms and Conditions of Use
Report abuse