Home > Discussion Groups > Modern

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.



 Return to Index  

Depends on what is going on

August 30 2017 at 9:19 AM
David Nickels  (Login djnick66)
Missing-Lynx members
from IP address 65.33.79.222


Response to Perishing of vinyl components

If the material itself is degrading (like DS tracks, for example) then you can't save it. if it is actually "vinyl" that can not be painted with solvent based paints, which will react with the plastic and cause an oily sticky sufrace. That is why if you build vinyl figure models etc those must be painted with acrylic paints.

Sometimes you get similar reactions to poorly cast resin parts (cheap or poorly mixed resins) that leach out oils forever and will bleed through paint. That stuff will also melt plastic.

 
 Respond to this message   
Responses

  1. Maybe your experience, not everyones. - Gary Owsley on Aug 30, 2017, 3:07 PM
    1. Gary I had trouble with UNPAINTED, untreated DS tracks. - Christophe Jacquemont on Aug 30, 2017, 5:43 PM
      1. Guess I'm just one lucky guy. - Gary Owsley on Aug 30, 2017, 11:01 PM
        1. DS - Pawel "Vodnik" Krupowicz on Aug 31, 2017, 2:49 AM
          1. that makes sense - David Nickels on Aug 31, 2017, 7:35 AM
      2. One of my Dragon Shermans in 1/72nd scale had this issue - Rob Gronovius on Sep 1, 2017, 10:19 AM
    2. Not just mine - David Nickels on Aug 31, 2017, 7:33 AM
     


Terms and Conditions of Use
Report abuse