Home > Discussion Groups > Modern

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

Looking for wheels..

September 30 2011 at 4:11 AM
Erik Gustavsson  (Login erik.gustavsson)
from IP address

I wonder if there are tires like these available in resin or any other material in 1/35 anywhere.
[linked image]

They are Dunlop 405/70R24 which according to the web means that they are about 34mm high in 1/35. Don´t know the exact width, but according to my own 1/35 plans of the vehicle (which is somewhat dodgy when it comes to exact dimensions) it´s about 11,7mm wide.

Now, I found that the Trumpeter Centauro tires are slightly too wide in diameter, and slightly narrow. They also have the wrong pattern.
I have no illusions that there are Dunlop SP 9 MPT tires in resin out there some where, but is there anything more similar than the centauro wheels I wonder?

 Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  

Terms and Conditions of Use
Report abuse