Home > Discussion Groups > Braille Scale

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement


Braille Scale Discussion Group

Hosted by Paul Giles, this discussion group is dedicated to 1/72 scale and smaller AFV modelling.
Not logged in | Login | Create AccountSearch    Chat!    Home    Post Message
  1. Rostislav Sherstnev video reviews... sticky (4 replies) View Thread - Paul Giles on May 31, 2016, 5:17 PM
  2.  
  3. TIPS AND TECHNIQUES - Archive sticky (1 reply) View Thread - Paul Giles on Apr 25, 2015, 10:41 AM
  4.  
  5. Armour fast M-18 Hellcat View Thread - Mark Thomas on Oct 24, 2017, 12:25 AM
    1. Quite impressed at first look n/t - Doug Edsall on Oct 24, 2017, 1:51 AM
     
  6. opening doors and hatches View Thread - bob magnan on Oct 23, 2017, 4:20 PM
    1. You can't really... - Paul Giles on Oct 23, 2017, 8:03 PM
    2. yes and no... - Kevin Tong on Oct 23, 2017, 9:53 PM
      1. your right... - paul bishop on Oct 24, 2017, 1:25 AM
    3. Re: opening doors and hatches - Mike Dougherty on Oct 24, 2017, 12:17 AM
     
  7. 1/76 Scratch-built Albion BY3/5 Office View Thread - Neil Craig on Oct 23, 2017, 1:58 PM
    1. Superb scratch-building... - Paul Giles on Oct 23, 2017, 2:06 PM
    2. Another masterpiece - Bill Scriven on Oct 23, 2017, 3:17 PM
    3. Albion - Richard Allebone on Oct 23, 2017, 3:20 PM
    4. Magnificent. - Dave Rhodes on Oct 23, 2017, 3:22 PM
    5. Albion BY3/5 Office - Dan Taylor on Oct 23, 2017, 3:32 PM
      1. Novel use of Dan's - Elliott Winthrop on Oct 23, 2017, 5:39 PM
    6. Love it Neil - Elliott Winthrop on Oct 23, 2017, 5:43 PM
    7. Absolute masterpiece - Chris Juskey on Oct 23, 2017, 7:28 PM
     
  8. SMC2017 (many pictures) View Thread - Bas Slaats on Oct 22, 2017, 4:37 PM
    1. part 2 - Bas Slaats on Oct 22, 2017, 4:41 PM
    2. part 3 - Bas Slaats on Oct 22, 2017, 4:45 PM
      1. Thanks Bas... - Paul Giles on Oct 22, 2017, 7:06 PM
      2. Flakwagen Truck - Alfred van Netburg on Oct 23, 2017, 3:11 AM
        1. Flakwagen - Bas Slaats on Oct 23, 2017, 6:21 AM
        2. flakwagen - jan willem bakker on Oct 23, 2017, 3:39 PM
          1. Awsome - Alfred van Netburg on Oct 23, 2017, 4:13 PM
      3. some. - Dave Rhodes on Oct 23, 2017, 9:24 AM
      4. thanks bas! - jan willem bakker on Oct 23, 2017, 3:41 PM
    3. Much better - Tomas Jakl on Oct 22, 2017, 5:30 PM
    4. Thanks Bas! - David Clark on Oct 22, 2017, 5:47 PM
    5. nice evening, lookin at these , thanks! - Peter van Kempen on Oct 22, 2017, 6:16 PM
    6. Thanks - Tim Marshall on Oct 22, 2017, 7:49 PM
      1. Phone - Bas Slaats on Oct 23, 2017, 6:19 AM
    7. SMC2017 - Dan Taylor on Oct 23, 2017, 5:02 AM
      1. Sorry to disturb here .. - Milan Vins on Oct 23, 2017, 6:01 AM
        1. Good to hear from you - Dan Taylor on Oct 23, 2017, 7:20 AM
        2. Confirm Please - Dan Taylor on Oct 23, 2017, 7:54 AM
          1. Sorry ... - Milan Vins on Oct 23, 2017, 9:21 AM
            1. Re: Sorry ... - Dan Taylor on Oct 23, 2017, 9:30 AM
              1. this time received - Milan Vins on Oct 23, 2017, 11:12 AM
    8. Thanks Bas, really nice models had fun looking ...n/t - Graham Mansell on Oct 23, 2017, 8:03 AM
     
  9. Stash review: Ardennes Tiger II should have zim, right? View Thread - Russ Field on Oct 22, 2017, 4:34 PM
    1. No - Elliott Winthrop on Oct 22, 2017, 11:57 PM
      1. Thanks, Elliot ... - Russ Field on Oct 23, 2017, 8:50 AM
      2. Hi Elliot, what a great site!! - Peter van Kempen on Oct 23, 2017, 12:24 PM
     
  10. Shaping resin tracks View Thread - Rob Haelterman on Oct 22, 2017, 7:40 AM
    1. Great idea! On the tendency to curve ... - Russ Field on Oct 22, 2017, 9:56 AM
    2. Hmm - Piotr Pyrczak on Oct 22, 2017, 10:51 AM
    3. terrific - peter harrington on Oct 22, 2017, 9:52 PM
    4. Very useful approach... - Peter Sisung on Oct 23, 2017, 6:09 AM
      1. JK - Rob Haelterman on Oct 23, 2017, 6:47 AM
    5. I used this 5 years ago on an M109 kit - Peter Petkov on Oct 23, 2017, 5:34 PM
     
  11. A tribute to a very close friend View Thread - Tim Neate on Oct 22, 2017, 7:30 AM
    1. A very nice tribute. - Russ Field on Oct 22, 2017, 9:59 AM
    2. Sad to hear... - Paul Giles on Oct 22, 2017, 12:19 PM
    3. We lost one of our members a year ago, quite suddenly... - Graham Mansell on Oct 22, 2017, 12:29 PM
    4. sad to hear but a nice tribute - paul bishop on Oct 22, 2017, 2:40 PM
    5. You did character him well by posting - Peter van Kempen on Oct 22, 2017, 6:24 PM
    6. Thanks - Tim Neate on Oct 23, 2017, 2:32 PM
    7. My deepest condolences. - Mark Deliduka on Oct 23, 2017, 2:48 PM
     
  12. WEEKLY UPDATE - 22.10.2017 View Thread - Paul Giles on Oct 22, 2017, 6:07 AM
    1. Got a couple of things done, oops 3 but didn't take pics... - Graham Mansell on Oct 22, 2017, 12:23 PM
      1. Wrestling PE - Alfred van Netburg on Oct 22, 2017, 1:54 PM
      2. Challenger/mutt - John lewis on Oct 23, 2017, 12:38 AM
      3. Thanks guys, have not been able to find any sort of... - Graham Mansell on Oct 23, 2017, 8:21 AM
      4. nice work - paul bishop on Oct 23, 2017, 2:24 PM
        1. Little, very tiny pieces, well detailed, you have to ask???... - Graham Mansell on Oct 23, 2017, 2:28 PM
    2. Hotchkiss H38/H39 (S-Model 1/72 + Caesar 1/72) - Robert (PL) on Oct 22, 2017, 12:23 PM
      1. Very nice little vignette, I like the way you put some... - Graham Mansell on Oct 22, 2017, 12:32 PM
        1. Thank you - Robert (PL) on Oct 22, 2017, 12:34 PM
      2. Hotchkiss - Alfred van Netburg on Oct 22, 2017, 1:50 PM
        1. No - Robert (PL) on Oct 22, 2017, 1:58 PM
          1. These ceasar figs look nice! - Peter van Kempen on Oct 22, 2017, 6:28 PM
      3. Hotchkiss - John lewis on Oct 23, 2017, 12:35 AM
      4. Double thumbs up! - Mark Munro on Oct 23, 2017, 2:33 AM
      5. Re: Hotchkiss H38/H39 (S-Model 1/72 + Caesar 1/72) - Radek Rzeszotarski on Oct 23, 2017, 4:27 AM
      6. great work! n/t - Kevin Tong on Oct 23, 2017, 7:55 AM
      7. Amazing little scene - Piotr Pyrczak on Oct 23, 2017, 8:32 AM
        1. I`m eager - Robert (PL) on Oct 23, 2017, 12:15 PM
      8. cracking scene - paul bishop on Oct 23, 2017, 2:25 PM
    3. Finished the T-Model M1114 - F. Giovagnorio on Oct 22, 2017, 1:33 PM
      1. Sand - Alfred van Netburg on Oct 22, 2017, 1:47 PM
        1. Tyres - F. Giovagnorio on Oct 23, 2017, 11:28 AM
      2. Much details we dont see............... - Peter van Kempen on Oct 22, 2017, 6:32 PM
        1. Hummer - John lewis on Oct 23, 2017, 12:32 AM
        2. Thanks! n/t - F. Giovagnorio on Oct 23, 2017, 11:29 AM
      3. Good looking model, reminds me to get moving on mine!! - Graham Mansell on Oct 23, 2017, 8:09 AM
        1. Thanks Graham ! n/t - F. Giovagnorio on Oct 23, 2017, 11:30 AM
    4. OBICE 305/17 AFFUSTO DE STEFANO - Rostislav Sherstnev on Oct 22, 2017, 3:51 PM
      1. Just drop the "s" from https. n/m - JMehner on Oct 22, 2017, 4:42 PM
        1. Thank you! - Rostislav Sherstnev on Oct 22, 2017, 5:14 PM
      2. Obice - John lewis on Oct 23, 2017, 12:30 AM
      3. Big Gun - Alfred van Netburg on Oct 23, 2017, 3:15 AM
      4. Re: OBICE 305/17 AFFUSTO DE STEFANO - Grant Parkin on Oct 23, 2017, 7:08 AM
      5. Interesting model & so far well executed, keep it up! n/t - Graham Mansell on Oct 23, 2017, 8:11 AM
      6. what a beast!!! - paul bishop on Oct 23, 2017, 2:26 PM
    5. Krupp-Daimler KW19 by GB MODELLI - Rostislav Sherstnev on Oct 22, 2017, 5:41 PM
      1. KW19 build - John lewis on Oct 23, 2017, 12:28 AM
      2. Some progress - Rostislav Sherstnev on Oct 23, 2017, 1:44 AM
        1. 👍👍👍 - John lewis on Oct 23, 2017, 1:56 AM
      3. Early - Alfred van Netburg on Oct 23, 2017, 3:19 AM
      4. Re: Krupp-Daimler KW19 by GB MODELLI - Radek Rzeszotarski on Oct 23, 2017, 4:41 AM
      5. Another very interesting kit looking forward to the work. n/t - Graham Mansell on Oct 23, 2017, 8:12 AM
      6. looks interesting - paul bishop on Oct 23, 2017, 2:27 PM
    6. Many different things in progress - Alfred van Netburg on Oct 23, 2017, 3:06 AM
      1. looking really good Alfred... - Kevin Tong on Oct 23, 2017, 8:02 AM
        1. Brumm - Alfred van Netburg on Oct 23, 2017, 12:00 PM
      2. That's quite a selection of kits and they are coming... - Graham Mansell on Oct 23, 2017, 8:15 AM
        1. Thanks - Alfred van Netburg on Oct 23, 2017, 12:06 PM
      3. A question... - Petr Vanek on Oct 23, 2017, 1:31 PM
        1. Answer😀 - Alfred van Netburg on Oct 23, 2017, 2:13 PM
      4. nice selection - paul bishop on Oct 23, 2017, 2:29 PM
      5. nice update - jan willem bakker on Oct 23, 2017, 3:51 PM
    7. 1/72 Elephant w interior - Chris Juskey on Oct 23, 2017, 7:35 AM
      1. looks amazing already! - Kevin Tong on Oct 23, 2017, 8:01 AM
        1. Rounds - Chris Juskey on Oct 23, 2017, 9:18 AM
      2. Really nice work there so far, want to watch this build! n/t - Graham Mansell on Oct 23, 2017, 8:17 AM
      3. Interior - Alfred van Netburg on Oct 23, 2017, 12:10 PM
        1. Esci kit - Chris Juskey on Oct 23, 2017, 1:31 PM
      4. fantastic work - paul bishop on Oct 23, 2017, 2:32 PM
        1. Rear hatch - Chris Juskey on Oct 23, 2017, 2:59 PM
      5. awesome - jan willem bakker on Oct 23, 2017, 3:52 PM
      6. Great model - Bas Slaats on Oct 23, 2017, 3:58 PM
    8. smc 2017 - jan willem bakker on Oct 23, 2017, 4:03 PM
      1. More than deserved! - Bas Slaats on Oct 23, 2017, 5:55 PM
     
  13. Paging Alex Clark and his "way-back" machine View Thread - Russ Field on Oct 21, 2017, 6:09 PM
    1. What issue exactly? - Benjamin Poss on Oct 22, 2017, 4:11 AM
      1. The full reference ... - Russ Field on Oct 22, 2017, 9:38 AM
     
  14. SMC2017 first pictures View Thread - Bas Slaats on Oct 21, 2017, 5:20 PM
    1. Sour grapes! - Dave Rhodes on Oct 21, 2017, 5:53 PM
    2. SMC - Gareth Jones on Oct 21, 2017, 6:46 PM
     
  15. For those who are interested in things WW2 Italian View Thread - Mark Munro on Oct 21, 2017, 2:30 AM
    1. Re: For those who are interested in things WW2 Italian - jim dunning on Oct 21, 2017, 3:33 AM
     
  16. Yet more prizes... View Thread - Paul Giles on Oct 20, 2017, 6:38 PM
    1. Thanks to Aleran - Simon Barnes on Oct 21, 2017, 9:38 AM
    2. A big "Thank You!" to Pete Marshall and Aleran Miniatures - Jeff Nelson on Oct 21, 2017, 3:18 PM
    3. Top quality. - Dave Rhodes on Oct 21, 2017, 3:55 PM
    4. Thanks to Aleran for these prizes, good to see more... - Graham Mansell on Oct 22, 2017, 11:57 AM
     
  17. Panther Mania! View Thread - Kevin Tong on Oct 20, 2017, 5:01 PM
    1. Exciting project... - Paul Giles on Oct 20, 2017, 6:21 PM
      1. I have that book! - Kevin Tong on Oct 21, 2017, 9:34 AM
        1. Probably not... - Paul Giles on Oct 21, 2017, 9:40 AM
    2. Looking forward to this one! - Rob Pye on Oct 20, 2017, 9:21 PM
      1. thanks Rob - Kevin Tong on Oct 21, 2017, 9:52 AM
    3. Panthers - Alfred van Netburg on Oct 21, 2017, 1:28 PM
    4. Ambitious project! Can you recommend ... - Russ Field on Oct 22, 2017, 9:49 AM
      1. MP Zimmerit - You buy direct - Rob Pye on Oct 22, 2017, 10:23 AM
        1. Thanks! - Russ Field on Oct 22, 2017, 1:33 PM
     
  18. SHELF QUEEN CHALLENGE 2017 - Week 25 of 30 View Thread - Paul Giles on Oct 20, 2017, 8:27 AM
    1. Sloppy Joe - Sherman shelf queen - Piotr Pyrczak on Oct 20, 2017, 10:24 AM
      1. Hopefully... - Paul Giles on Oct 20, 2017, 2:12 PM
        1. Thanks for the info Paul - Piotr Pyrczak on Oct 22, 2017, 10:44 AM
      2. Texture - Alfred van Netburg on Oct 22, 2017, 1:42 PM
        1. Re: Texture - Piotr Pyrczak on Oct 23, 2017, 8:35 AM
    2. PzSfl auf GW II “Bison 2” - Alfred van Nerburg on Oct 21, 2017, 8:33 AM
      1. An interesting vehicle - Piotr Pyrczak on Oct 22, 2017, 10:47 AM
        1. Bison - Alfred van Netburg on Oct 22, 2017, 1:37 PM
          1. Yes, the tools - Piotr Pyrczak on Oct 23, 2017, 8:30 AM
     
  19. OOP's this is new!! View Thread - Mike Durand on Oct 19, 2017, 7:10 PM
    1. Me too...I guess one of the hamsters running this tech has died on the treadmill...:) - Rob Pye on Oct 20, 2017, 3:47 AM
    2. Strange... - Paul Giles on Oct 20, 2017, 8:16 AM
    3. Me too....... - Stefan Zadziuk on Oct 20, 2017, 9:21 AM
    4. Apparently a Network54 fault... - Paul Giles on Oct 20, 2017, 9:32 AM
      1. Seems to be ok now... - Paul Giles on Oct 20, 2017, 9:33 AM
      2. Thanks Paul...... - Stefan Zadziuk on Oct 20, 2017, 9:36 AM
      3. Its OKAY, - Peter van Kempen on Oct 20, 2017, 10:54 AM
      4. Re: Apparently a Network54 fault... - Ric Montgomery on Oct 20, 2017, 12:40 PM
        1. Well it still keeps asking me to log in again and again... - Rob Pye on Oct 20, 2017, 12:42 PM
          1. Obviously annoyed at what you said about it ;)...N/T - Paul Giles on Oct 20, 2017, 1:47 PM
            1. LOL - Rob Pye on Oct 20, 2017, 3:30 PM
     
  20. Anyone else not stay logged in? View Thread - Simon Barnes on Oct 19, 2017, 5:58 PM
    1. I've always had to. - Mike Durand on Oct 19, 2017, 7:01 PM
      1. I am on about whilst I'm still on the page? - Simon barnes on Oct 19, 2017, 8:10 PM
    2. Hmmm Let me try. - Tim Marshall on Oct 19, 2017, 8:54 PM
      1. Yup - Tim Marshall on Oct 19, 2017, 8:56 PM
    3. Yes, yet another glitch in the dino-tech running this forum... - Rob Pye on Oct 20, 2017, 3:49 AM
      1. Why should I take it personally.... - Paul Giles on Oct 20, 2017, 8:18 AM
        1. Basic stuff??? - Dave Rhodes on Oct 20, 2017, 9:44 AM
        2. Well every time I moan about the crap tech on here you yell at me... - Rob Pye on Oct 20, 2017, 12:44 PM
    4. Yes, me too - Rob Gronovius on Oct 20, 2017, 11:05 AM
     
  21. STUG III E .Dragon View Thread - EDERN Philippe on Oct 19, 2017, 4:58 PM
    1. No! And with paint, - Simon Barnes on Oct 19, 2017, 5:44 PM
    2. Those who want, can always get wheels and tracks elsewhere. - Peter van Kempen on Oct 19, 2017, 6:29 PM
    3. I've lost track - Mike Durand on Oct 19, 2017, 7:07 PM
     
  22. Neatescale website update View Thread - Tim Neate on Oct 19, 2017, 3:27 PM
    1. Some Great Reference Photos - Neil Craig on Oct 19, 2017, 7:23 PM
    2. fantastic articles - paul bishop on Oct 20, 2017, 2:22 AM
    3. Nice - Bas Slaats on Oct 20, 2017, 10:47 AM
    4. Thanks Tim... - Paul Giles on Oct 20, 2017, 2:04 PM
     
  23. Panzer III series pictures View Thread - Alfred van Netburg on Oct 19, 2017, 7:14 AM
    1. superb collection - Kevin Tong on Oct 19, 2017, 9:49 AM
    2. A Most Excellent Collection - Mark Deliduka on Oct 19, 2017, 2:05 PM
    3. Very nice show of brands of days passed - Peter van Kempen on Oct 19, 2017, 3:36 PM
    4. Cool collection! - Chris Juskey on Oct 19, 2017, 4:33 PM
      1. Thanks guys - Alfred van Netburg on Oct 20, 2017, 1:22 PM
     
  24. Sherman Firefly 1/100 View Thread - Jeremy Connaughton on Oct 18, 2017, 2:21 PM
    1. Well done... - Paul Giles on Oct 18, 2017, 7:07 PM
    2. Cool - Tim James on Oct 19, 2017, 7:38 AM
      1. Thanks guys - Jeremy Connaughton on Oct 19, 2017, 2:58 PM
     
  25. GROUP BUILD 2017.3 - RECCE - Week11 of 22... View Thread - Paul Giles on Oct 18, 2017, 5:52 AM
    1. Jeep with base coat - Piotr Pyrczak on Oct 18, 2017, 6:32 AM
      1. exquisite!! - paul bishop on Oct 18, 2017, 10:16 AM
      2. Neat jeep - John lewis on Oct 18, 2017, 1:18 PM
      3. Re - Alfred van Netburg on Oct 18, 2017, 2:24 PM
      4. Now that is nice......! - Stefan Zadziuk on Oct 18, 2017, 5:35 PM
      5. Convincing stowage on this little beast... - Peter Sisung on Oct 18, 2017, 6:10 PM
      6. Little beauty... - Paul Giles on Oct 18, 2017, 7:13 PM
      7. Some great detail - Elliott Winthrop on Oct 18, 2017, 9:46 PM
      8. Wow.... - Tim James on Oct 19, 2017, 7:44 AM
      9. Thanks guys... - Piotr Pyrczak on Oct 19, 2017, 9:15 AM
      10. very detailed - Kevin Tong on Oct 19, 2017, 9:43 AM
      11. Great, what setting? - Joel G on Oct 19, 2017, 10:39 AM
        1. Thanks, going for ETO 44-45 n/t - Piotr Pyrczak on Oct 20, 2017, 10:21 AM
    2. German early war recce group - Alfred van Netburg on Oct 18, 2017, 6:55 AM
      1. very nice - paul bishop on Oct 18, 2017, 10:15 AM
        1. Dio - Alfred van Netburg on Oct 18, 2017, 2:25 PM
      2. Cool cars - John lewis on Oct 18, 2017, 1:21 PM
        1. Thx - Alfred van Netburg on Oct 18, 2017, 2:32 PM
      3. F to F - Elliott Winthrop on Oct 18, 2017, 6:13 PM
        1. Mesh - Alfred van Netburg on Oct 19, 2017, 4:56 AM
      4. The early war stuff is very appealing to me... - Peter Sisung on Oct 18, 2017, 6:14 PM
        1. Thx - Alfred van Netburg on Oct 19, 2017, 4:35 AM
      5. Excellent choices... - Paul Giles on Oct 18, 2017, 7:16 PM
        1. Thanks - Alfred van Netburg on Oct 19, 2017, 4:42 AM
      6. Nice set - Piotr Pyrczak on Oct 19, 2017, 9:17 AM
        1. 221 - Alfred van netburg on Oct 20, 2017, 2:08 AM
      7. nice collection... - Kevin Tong on Oct 19, 2017, 9:42 AM
        1. Re: nice collection... - Alfred van Netburg on Oct 20, 2017, 2:36 AM
      8. Very nice recce group... - David on Oct 19, 2017, 12:46 PM
        1. Thx - Alfred van Netburg on Oct 20, 2017, 2:39 AM
    3. Recce - Entry No1 - Actung Minen - paul bishop on Oct 18, 2017, 10:13 AM
      1. Great looking dio Paul - John lewis on Oct 18, 2017, 1:17 PM
        1. thanks John n/t - paul bishop on Oct 19, 2017, 3:13 AM
      2. Nice - Alfred van Netburg on Oct 18, 2017, 2:21 PM
        1. thanks Alfred n/t - paul bishop on Oct 19, 2017, 3:13 AM
      3. Re: Recce - Entry No1 - Actung Minen - Radek Rzeszotarski on Oct 18, 2017, 2:28 PM
        1. well... - paul bishop on Oct 19, 2017, 3:46 AM
      4. Very nicely done and interesting to boot... - Peter Sisung on Oct 18, 2017, 6:06 PM
        1. cheers - paul bishop on Oct 19, 2017, 3:48 AM
      5. Really like it Paul - Elliott Winthrop on Oct 18, 2017, 6:07 PM
        1. cheers Elliot n/t - paul bishop on Oct 19, 2017, 3:48 AM
      6. Inspirational... - Paul Giles on Oct 18, 2017, 7:22 PM
        1. thanks Paul - paul bishop on Oct 19, 2017, 3:49 AM
      7. Great little dio... - Tim James on Oct 19, 2017, 7:50 AM
        1. thanks Tim - paul bishop on Oct 19, 2017, 8:12 AM
      8. Nicely done - Piotr Pyrczak on Oct 19, 2017, 9:19 AM
        1. Thanks Piotr - paul bishop on Oct 19, 2017, 11:39 AM
      9. looking good! - Kevin Tong on Oct 19, 2017, 9:32 AM
        1. hes probing for mines - paul bishop on Oct 19, 2017, 11:38 AM
    4. LRC Otter - IBG Models 1:72 - Radek Rzeszotarski on Oct 18, 2017, 2:24 PM
      1. Congratulations... - Rob Searson on Oct 18, 2017, 5:29 PM
      2. Crazy Cute - Elliott Winthrop on Oct 18, 2017, 6:03 PM
      3. Another beautiful diorama base! - Peter Sisung on Oct 18, 2017, 6:07 PM
      4. Excellent tutorial... - Paul Giles on Oct 18, 2017, 7:27 PM
      5. stunning - paul bishop on Oct 19, 2017, 3:51 AM
      6. Super work - Alfred van Netburg on Oct 19, 2017, 4:32 AM
      7. Lovely base - Piotr Pyrczak on Oct 19, 2017, 9:21 AM
      8. beautiful! - Kevin Tong on Oct 19, 2017, 9:30 AM
      9. Otter and Leszek pics - Peter van Kempen on Oct 19, 2017, 3:50 PM
      10. Re: LRC Otter - IBG Models 1:72 - Radek Rzeszotarski on Oct 19, 2017, 4:41 PM
      11. the last - mauro traverso on Oct 20, 2017, 12:35 PM
    5. SdKfz 231 - Part 2... - Paul Giles on Oct 18, 2017, 7:03 PM
      1. Wow Paul - Elliott Winthrop on Oct 18, 2017, 9:49 PM
        1. Thanks Elliott... - Paul Giles on Oct 20, 2017, 2:16 PM
      2. top class work sir - paul bishop on Oct 19, 2017, 3:53 AM
        1. Thanks Paul... - Paul Giles on Oct 20, 2017, 2:18 PM
      3. Pe vs plastic - Alfred van Netburg on Oct 19, 2017, 4:27 AM
        1. Just my obsession... - Paul Giles on Oct 20, 2017, 2:24 PM
      4. Hard PE work - Piotr Pyrczak on Oct 19, 2017, 9:23 AM
        1. They are atrocious... - Paul Giles on Oct 20, 2017, 2:29 PM
      5. impressive detail work - Kevin Tong on Oct 19, 2017, 9:27 AM
        1. Thanks Kevin... - Paul Giles on Oct 20, 2017, 2:30 PM
    6. some of mine - Elliott Winthrop on Oct 19, 2017, 1:54 AM
      1. you've been busy!!! - paul bishop on Oct 19, 2017, 3:54 AM
      2. 8 wheels - Alfred van Netburg on Oct 19, 2017, 4:29 AM
      3. Fenderless 234 - Piotr Pyrczak on Oct 19, 2017, 9:26 AM
      4. awesome! - Kevin Tong on Oct 19, 2017, 9:26 AM
      5. Smart and busy - David on Oct 19, 2017, 12:53 PM
      6. 8-rad heaven... - Paul Giles on Oct 20, 2017, 2:38 PM
     
  26. Search function is now working again... View Thread - Paul Giles on Oct 18, 2017, 5:44 AM
    1. Re: Search function is now working again... - Ric Montgomery on Oct 18, 2017, 8:07 AM
     
  27. Sprue shots of the 'new' Dragon Panzer IV Ausf G...don't hold your breath View Thread - Rob Pye on Oct 17, 2017, 5:29 PM
    1. Looks like - Elliott Winthrop on Oct 17, 2017, 5:50 PM
      1. You got a point there. - Peter van Kempen on Oct 18, 2017, 3:58 AM
        1. As for that running gear... - Rob Pye on Oct 18, 2017, 9:40 AM
    2. They need more then a running gear - Robert Kru on Oct 18, 2017, 12:47 PM
      1. At least was the idler wheel well spaced?? - Peter van Kempen on Oct 19, 2017, 3:57 PM
    3. Check out the StuG III Ausf. F - Timothy Lau on Oct 18, 2017, 3:03 PM
      1. Wow, that is a bad job by Dragon! - Rob Pye on Oct 18, 2017, 4:08 PM
      2. Not entirely - Simon Barnes on Oct 19, 2017, 5:54 PM
    4. what happened? - jan willem bakker on Oct 19, 2017, 1:51 PM
    5. Dragon - Tim Treadway on Oct 19, 2017, 4:53 PM
    6. Don't know what all the fuss is about - Simon Barnes on Oct 19, 2017, 5:42 PM
     
  28. TRADING POST - 17.10.2017 View Thread - Paul Giles on Oct 17, 2017, 9:36 AM
    1. A very long shot, Academy HEMTT - Simon Barnes on Oct 18, 2017, 8:27 AM
      1. Possibly, but postage could be a hassle, from NA, so .... - Graham Mansell on Oct 18, 2017, 10:53 AM
        1. Exactly the same - Simon Barnes on Oct 18, 2017, 11:31 AM
          1. Simon, I think you are spot on... - Paul Gaertner on Oct 18, 2017, 11:49 AM
            1. Thanks Paul, a few pictures I've found - Simon Barnes on Oct 18, 2017, 4:09 PM
              1. Not better.......... - Dan Rosecrans on Oct 18, 2017, 5:06 PM
              2. Looks like you found your hitch answer... - Paul Gaertner on Oct 18, 2017, 9:54 PM
                1. anyone know what the truck is in the last photo? - paul bishop on Oct 19, 2017, 8:06 AM
                  1. German - Simon Barnes on Oct 19, 2017, 11:46 AM
                  2. Magirus Deutz Jupiter - one of the standard trucks of the Bundeswehr n/m - JMehner on Oct 20, 2017, 4:35 AM
                    1. thanks all n/t - paul bishop on Oct 21, 2017, 2:46 PM
            2. Thanks Dan, and found the hitching point - Simon Barnes on Oct 18, 2017, 8:34 PM
              1. I was just there and about to leave you directions .... - Graham Mansell on Oct 18, 2017, 8:48 PM
                1. Good call! - Simon Barnes on Oct 18, 2017, 8:54 PM
      2. Re: A very long shot, Academy HEMTT - Grant Parkin on Oct 18, 2017, 11:00 AM
        1. Had to look but yes - Simon Barnes on Oct 18, 2017, 11:35 AM
          1. Tanker conversion? - paul bishop on Oct 18, 2017, 11:46 AM
     
  29. SMC 2017 View Thread - Bas Slaats on Oct 16, 2017, 5:36 PM
    1. SMC - Gareth Jones on Oct 16, 2017, 6:36 PM
      1. Genie museum - Bas Slaats on Oct 16, 2017, 7:05 PM
      2. DDR vehicles - Chris Grove on Oct 17, 2017, 12:58 PM
        1. Vught - Gareth Jones on Oct 18, 2017, 4:46 AM
    2. Markings - Marcus Pollard on Oct 17, 2017, 12:33 AM
      1. Condor - Bas Slaats on Oct 17, 2017, 5:18 AM
     
  30. Project for the paper zimmeret guy View Thread - John lewis on Oct 16, 2017, 11:38 AM
    1. Confused....frameworks for what exactly, the tools? - Rob Pye on Oct 16, 2017, 5:36 PM
      1. Racks - John lewis on Oct 16, 2017, 7:16 PM
        1. Tool racks - Andrew deeley on Oct 17, 2017, 11:49 AM
        2. Part.......... - Dan Rosecrans on Oct 17, 2017, 12:43 PM
     
  31. Scale Modelworld, Telford, Annual Get Together... View Thread - Paul Giles on Oct 16, 2017, 9:00 AM
    1. Telford Get Together - Rod Woodhouse on Oct 16, 2017, 7:36 PM
      1. Hope so Rod... - Paul Giles on Oct 17, 2017, 5:01 AM
      2. Re: Telford Get Together - Stefan on Oct 18, 2017, 6:56 PM
    2. Attending - Mark Knight on Oct 17, 2017, 3:44 AM
      1. Great... - Paul Giles on Oct 17, 2017, 5:02 AM
      2. Re: Attending - Stefan on Oct 18, 2017, 6:58 PM
    3. Telford get together - John Rulton on Oct 17, 2017, 4:17 AM
      1. It should be good... - Paul Giles on Oct 17, 2017, 5:05 AM
      2. Re: Telford get together - Stefan on Oct 18, 2017, 7:00 PM
    4. I'll be there. - Ley Reynolds on Oct 18, 2017, 6:08 AM
      1. Look forward to seeing you there... - Paul Giles on Oct 18, 2017, 6:32 AM
      2. Re: I'll be there. - Stefan on Oct 18, 2017, 7:02 PM
     
  32. Zvezda "Iskander-M" once more View Thread - David Clark on Oct 16, 2017, 2:26 AM
    1. Re: Zvezda "Iskander-M" once more - Grant Parkin on Oct 16, 2017, 4:35 AM
      1. HLJ - Simon Barnes on Oct 16, 2017, 7:34 AM
      2. No duty - David Clark on Oct 16, 2017, 7:38 AM
        1. Re: No duty - Grant Parkin on Oct 16, 2017, 9:31 AM
     
  33. Tow cables View Thread - John lewis on Oct 16, 2017, 1:32 AM
    1. whats the method here - paul bishop on Oct 16, 2017, 2:53 AM
    2. Re: Tow cables - Grant Parkin on Oct 16, 2017, 4:40 AM
    3. The more strands the better - Simon Barnes on Oct 16, 2017, 7:40 AM
      1. Re: The more strands the better - Grant Parkin on Oct 16, 2017, 9:38 AM
        1. thanks both n/t - paul bishop on Oct 16, 2017, 10:45 AM
    4. Slept late - John lewis on Oct 16, 2017, 11:26 AM
    5. Tow Cables - Larry Fritz on Oct 16, 2017, 3:59 PM
      1. Hey Larry - John lewis on Oct 16, 2017, 5:06 PM
    6. My method............ - Dan Rosecrans on Oct 17, 2017, 1:14 PM
     
  34. Pipes - first attempt... View Thread - Paul Giles on Oct 15, 2017, 4:24 PM
    1. The walking german guy - John lewis on Oct 15, 2017, 5:20 PM
    2. You don't........ - Dan Rosecrans on Oct 15, 2017, 6:08 PM
    3. I think they have come out great n/t - paul bishop on Oct 16, 2017, 1:19 AM
    4. Smoke - Alfred van Netburg on Oct 16, 2017, 7:59 AM
    5. They look great. - al magnus on Oct 16, 2017, 1:07 PM
    6. Inspiration? :) - Radek Rzeszotarski on Oct 17, 2017, 2:26 AM
      1. I like it... - Paul Giles on Oct 17, 2017, 5:07 AM
    7. Thanks chaps... - Paul Giles on Oct 17, 2017, 9:42 AM
    8. Those are great! - Mark Munro on Oct 18, 2017, 2:14 AM
     
  35. FlyHawk M1A2 Abrams MBT View Thread - roger fabrocini on Oct 15, 2017, 3:18 PM
    1. Beautiful work (nt) - Brian J. Brown on Oct 15, 2017, 9:40 PM
    2. stunning paint finish - paul bishop on Oct 16, 2017, 1:19 AM
    3. Asking for permission to use your pictures - Henk Timmerman / HenkofHolland on Oct 16, 2017, 4:53 AM
      1. of course, no problem Henk n/t - roger fabrocini on Oct 16, 2017, 12:39 PM
        1. Thanks!!! I have update the page with your pictures. n/t - Henk Timmerman / HenkofHolland on Oct 17, 2017, 8:25 AM
    4. Nice M1 - Bas Slaats on Oct 16, 2017, 5:01 AM
      1. no serious problems encountered Bas - roger fabrocini on Oct 16, 2017, 12:46 PM
    5. Abrams - Alfred van Netburg on Oct 16, 2017, 7:54 AM
    6. Great looking Abrams. - al magnus on Oct 16, 2017, 11:02 AM
    7. A real masterpiece! congratulations - Robert Kru on Oct 16, 2017, 1:57 PM
    8. Great build, lifelike incl the scratches on armour.. - Peter van Kempen on Oct 16, 2017, 5:45 PM
    9. resized images - roger fabrocini on Oct 16, 2017, 6:17 PM
    10. Color? - Chuck Robertson on Oct 22, 2017, 11:10 PM
     
  36. WEEKLY UPDATE - 15.10.2017 View Thread - Paul Giles on Oct 15, 2017, 9:58 AM
    1. MERKAVA IV HobbyBoss - Edern Philippe on Oct 15, 2017, 10:28 AM
      1. Nice looking so far - John lewis on Oct 15, 2017, 11:05 AM
      2. That is looking very nice so far and I am looking forward... - Graham Mansell on Oct 15, 2017, 11:19 AM
      3. Yep........ - Dan Rosecrans on Oct 15, 2017, 12:58 PM
      4. Merk - Alfred van Netburg on Oct 15, 2017, 1:00 PM
      5. Keep us posted - Joel G on Oct 15, 2017, 2:32 PM
      6. nice and clean ;) n/t - paul bishop on Oct 16, 2017, 2:54 AM
      7. Looking good... - Paul Giles on Oct 16, 2017, 6:49 AM
      8. Very nice! Will follow with interest n/t - Robert Kru on Oct 16, 2017, 1:53 PM
    2. I'm back on track (pun intended) next big show in Mar... - Graham Mansell on Oct 15, 2017, 11:15 AM
      1. That bomb - John lewis on Oct 15, 2017, 11:35 AM
      2. Spelling - Alfred van Netburg on Oct 15, 2017, 11:45 AM
      3. thats a beast!!! - paul bishop on Oct 16, 2017, 1:16 AM
      4. Interesting... - Paul Giles on Oct 16, 2017, 6:58 AM
    3. First finished painted model since 2014! - Alfred van Netburg on Oct 15, 2017, 11:27 AM
      1. Nice collection - John lewis on Oct 15, 2017, 5:17 PM
        1. Ace - Alfred van Netburg on Oct 16, 2017, 12:58 PM
      2. some crackers in there - paul bishop on Oct 16, 2017, 2:54 AM
        1. Thx - Alfred van Netburg on Oct 16, 2017, 12:59 PM
      3. A nice group of models... - Paul Giles on Oct 16, 2017, 7:11 AM
        1. Backlog - Alfred van Netburg on Oct 16, 2017, 1:01 PM
      4. they look good Alfred - Kevin Tong on Oct 16, 2017, 9:17 AM
        1. Thanks - Alfred van Netburg on Oct 16, 2017, 1:08 PM
      5. The master of rare vehicles - Robert Kru on Oct 16, 2017, 1:59 PM
        1. More - Alfred van Netburg on Oct 16, 2017, 3:53 PM
          1. Ftf - Robert Kru on Oct 18, 2017, 12:58 PM
    4. Panthers D, A - John lewis on Oct 15, 2017, 11:29 AM
      1. Panthers - Alfred van Netburg on Oct 15, 2017, 1:07 PM
        1. Thanks Al - John lewis on Oct 15, 2017, 1:39 PM
      2. Very nice indeed... - Paul Giles on Oct 16, 2017, 7:20 AM
        1. thanks Paul - john lewis on Oct 16, 2017, 2:18 PM
          1. I think I can help... - Paul Giles on Oct 16, 2017, 8:06 PM
      3. look wonderful! - Kevin Tong on Oct 16, 2017, 9:07 AM
        1. thanks Kevin - john lewis on Oct 16, 2017, 2:20 PM
      4. These are great looking Panthers. - al magnus on Oct 16, 2017, 10:57 AM
        1. thanks Al - john lewis on Oct 16, 2017, 2:27 PM
    5. BTR-70 in Afghanistan - Robert (PL) on Oct 15, 2017, 11:37 AM
      1. Diecast - Alfred van Netburg on Oct 15, 2017, 1:11 PM
      2. Dang - John lewis on Oct 15, 2017, 5:21 PM
      3. scrubs cup well - paul bishop on Oct 16, 2017, 1:15 AM
      4. Excellent... - Paul Giles on Oct 16, 2017, 7:32 AM
        1. Die-cast recommended - Robert (PL) on Oct 16, 2017, 11:26 AM
    6. sdkfz 10-4 - jan willem bakker on Oct 15, 2017, 2:10 PM
      1. Great job all-round - John lewis on Oct 15, 2017, 3:06 PM
      2. its a beauty...... - Peter van Kempen on Oct 15, 2017, 3:07 PM
      3. top class work there - paul bishop on Oct 16, 2017, 1:12 AM
      4. 10/4 - Alfred van Netburg on Oct 16, 2017, 4:54 AM
      5. Great model - Bas Slaats on Oct 16, 2017, 5:05 AM
      6. Beautifully done... - Paul Giles on Oct 16, 2017, 7:43 AM
      7. looks great! - Kevin Tong on Oct 16, 2017, 9:03 AM
    7. PzKpfwIII G - Part 2... - Paul Giles on Oct 15, 2017, 4:11 PM
      1. Very nice work so far, and a question... - Peter Sisung on Oct 15, 2017, 4:22 PM
        1. Masterclub ( MC435033 g hexagon bolt, size S) - Robert (PL) on Oct 15, 2017, 7:47 PM
        2. Thanks Peter, and an answer... - Paul Giles on Oct 15, 2017, 9:27 PM
          1. Jadar Hobby sells the MasterClub bits - Rob Pye on Oct 16, 2017, 7:00 AM
            1. That's where I got mine... - Paul Giles on Oct 16, 2017, 7:54 AM
      2. Beautifully done. - John lewis on Oct 15, 2017, 5:24 PM
        1. Thanks John... - Paul Giles on Oct 15, 2017, 9:29 PM
      3. Great work + question - Robert (PL) on Oct 15, 2017, 7:43 PM
        1. I have... - Paul Giles on Oct 15, 2017, 9:12 PM
          1. Yes I did - Robert (PL) on Oct 15, 2017, 10:08 PM
            1. Oops, sorry... - Paul Giles on Oct 15, 2017, 10:12 PM
              1. Postage - Robert (PL) on Oct 15, 2017, 10:44 PM
            2. you replied to me (Paul B) not Paul Giles - paul bishop on Oct 16, 2017, 1:15 AM
              1. oooh stupid me ! (n/t) - Robert (PL) on Oct 16, 2017, 1:21 AM
      4. Very nice work! - Chris Juskey on Oct 15, 2017, 9:31 PM
        1. Masterclub items... - Paul Giles on Oct 16, 2017, 8:00 AM
      5. old school kit bashing at its best - paul bishop on Oct 16, 2017, 1:14 AM
        1. Thanks Paul... - Paul Giles on Oct 16, 2017, 8:02 AM
      6. Pz III - Alfred van Netburg on Oct 16, 2017, 5:02 AM
        1. Both G's... - Paul Giles on Oct 16, 2017, 8:08 AM
        2. Yep could add some to the group - Robert Kru on Oct 16, 2017, 1:26 PM
          1. Pz III gallery - Alfred van Netburg on Oct 16, 2017, 3:59 PM
      7. Looking good Paul! - Rob Pye on Oct 16, 2017, 6:57 AM
        1. Thanks Rob... - Paul Giles on Oct 16, 2017, 8:19 AM
      8. excellent work! - Kevin Tong on Oct 16, 2017, 9:01 AM
        1. Books, lots of books... - Paul Giles on Oct 16, 2017, 9:13 AM
      9. worth the extra effort - Robert Kru on Oct 16, 2017, 1:52 PM
        1. Done... - Paul Giles on Oct 16, 2017, 8:01 PM
      10. Lovely work....... - Stefan Zadziuk on Oct 16, 2017, 6:57 PM
        1. Sprocket with hubcap on... - Paul Giles on Oct 16, 2017, 8:19 PM
    8. this weeks work... - paul bishop on Oct 16, 2017, 2:45 AM
      1. A lot - Alfred van Netburg on Oct 16, 2017, 5:06 AM
        1. thanks - paul bishop on Oct 16, 2017, 9:30 AM
      2. A fine selection of items... - Paul Giles on Oct 16, 2017, 8:29 AM
        1. thanks Paul - paul bishop on Oct 16, 2017, 9:33 AM
      3. nice varied selection - Kevin Tong on Oct 16, 2017, 8:56 AM
        1. thanks Kevin n/t - paul bishop on Oct 16, 2017, 9:33 AM
      4. Never! - Dave Rhodes on Oct 16, 2017, 12:37 PM
        1. thanks Dave - paul bishop on Oct 16, 2017, 1:11 PM
      5. Pauls usual surprise collection. - Robert Kru on Oct 16, 2017, 2:07 PM
        1. Thanks Robert - paul bishop on Oct 16, 2017, 3:30 PM
      6. The Bishop - John lewis on Oct 16, 2017, 5:13 PM
        1. thats a great idea - paul bishop on Oct 17, 2017, 1:16 AM
    9. Sdkfz 221 and Laffly W 15 T Spahwagen - Alfred van Netburg on Oct 16, 2017, 9:51 AM
      1. nice builds - paul bishop on Oct 16, 2017, 10:45 AM
        1. Halftrack - Alfred van Netburg on Oct 16, 2017, 1:12 PM
          1. haha .... - paul bishop on Oct 16, 2017, 3:31 PM
      2. Those are great looking builds. - al magnus on Oct 16, 2017, 10:54 AM
        1. Ace Laffly - Alfred van Netburg on Oct 16, 2017, 1:26 PM
      3. Where were the Laffly's used??? (n/t) - Mark Munro on Oct 18, 2017, 2:16 AM
        1. Use - Alfred van Netburg on Oct 18, 2017, 3:39 AM
     
  37. StuG3 part....5? 6? View Thread - T-izumi on Oct 15, 2017, 8:25 AM
    1. Stunning work... - Paul Giles on Oct 15, 2017, 9:57 AM
    2. well it gets my top prize - paul bishop on Oct 15, 2017, 10:29 AM
    3. No sloppy work here - John lewis on Oct 15, 2017, 11:03 AM
    4. Simply beautiful - Alfred van Netburg on Oct 15, 2017, 1:20 PM
    5. That is coming along nicely. - al magnus on Oct 16, 2017, 11:04 AM
    6. Exceptional work... - Stefan Zadziuk on Oct 16, 2017, 7:13 PM
    7. thanks - T-izumi on Oct 19, 2017, 9:26 AM
     
  38. 1/76 Scratch-built Thorneycroft Tartar Machinery F by Richard Allebone View Thread - Neil Craig on Oct 14, 2017, 7:19 PM
    1. Outstanding! - David Clark on Oct 14, 2017, 8:22 PM
      1. Thornycroft - Richard Allebone on Oct 15, 2017, 5:03 AM
    2. Outstanding indeed - John lewis on Oct 14, 2017, 11:49 PM
    3. Very nice.......... - Dan Rosecrans on Oct 15, 2017, 12:32 AM
    4. Difference? - Alfred van Netburg on Oct 15, 2017, 5:24 AM
      1. Difference - Neil Craig on Oct 15, 2017, 5:50 AM
    5. Re: 1/76 Scratch-built Thorneycroft Tartar Machinery F by Richard Allebone - Dave Haine on Oct 15, 2017, 6:19 AM
    6. what a gem - paul bishop on Oct 15, 2017, 10:27 AM
    7. Lovely job - Bill Scriven on Oct 15, 2017, 11:43 AM
    8. Fantastic. - Dave Rhodes on Oct 15, 2017, 4:32 PM
    9. Magnificent... - Stefan Zadziuk on Oct 16, 2017, 7:25 PM
     
  39. WIP IBG type 94 Tankette -pictures fixed- View Thread - Benjamin Poss on Oct 13, 2017, 3:42 PM
    1. Like - Alfred van Netburg on Oct 15, 2017, 5:20 AM
     
  40. Good news for Preiser fans View Thread - Chris Juskey on Oct 13, 2017, 10:00 AM
    1. All good news but... - Rob Pye on Oct 13, 2017, 10:57 AM
      1. Rob............ - Dan Rosecrans on Oct 13, 2017, 4:06 PM
        1. Based in the UK...so shipping and customs may be a killer for an item made in Europe! :( - Rob Pye on Oct 14, 2017, 4:16 PM
          1. Customs ex EU - Chris Grove on Oct 15, 2017, 2:33 PM
        2. Rob.................. - Dan Rosecrans on Oct 15, 2017, 12:28 AM
          1. I didn't see the $3 for shipping...is that for int'l??? - Rob Pye on Oct 15, 2017, 2:24 PM
            1. Try this, Rob........... - Dan Rosecrans on Oct 15, 2017, 6:02 PM
    2. still waiting - peter harrington on Oct 13, 2017, 8:17 PM
      1. Sorry to... - Milan Vins on Oct 14, 2017, 2:06 AM
    3. That's good news - Piotr Pyrczak on Oct 14, 2017, 7:39 AM
    4. Re: Good news for Preiser fans - Loren on Oct 15, 2017, 8:33 PM
     
  41. SHELF QUEEN CHALLENGE 2017 - Week 24 of 30 View Thread - Paul Giles on Oct 13, 2017, 5:31 AM
    1. Little Red Riding Hood - al magnus on Oct 13, 2017, 6:07 PM
      1. Cool idea - Piotr Pyrczak on Oct 14, 2017, 7:52 AM
        1. Thanks Piotr. - al magnus on Oct 14, 2017, 1:40 PM
          1. Re: Thanks Piotr. - Piotr Pyrczak on Oct 14, 2017, 3:19 PM
            1. As it stand now, my plan is to... - al magnus on Oct 15, 2017, 1:25 PM
      2. Neat project - John lewis on Oct 14, 2017, 5:36 PM
        1. Thanks John. - al magnus on Oct 15, 2017, 1:32 PM
      3. Scratch - Alfred van Netburg on Oct 15, 2017, 5:28 AM
        1. Thanks Alfred. - al magnus on Oct 15, 2017, 1:46 PM
      4. One of the more likely late war tools - Peter van Kempen on Oct 15, 2017, 7:05 AM
        1. Thanks Peter. - al magnus on Oct 15, 2017, 1:48 PM
     
  42. Show report, late, but that's life..... View Thread - Graham Mansell on Oct 12, 2017, 11:04 AM
    1. Still an excellent showing... - Paul Giles on Oct 12, 2017, 2:04 PM
    2. some great entries - paul bishop on Oct 12, 2017, 3:07 PM
    3. Sorry I couldn't make it! - Will Alcott on Oct 12, 2017, 3:08 PM
    4. Thanks Graham! - Mark Deliduka on Oct 12, 2017, 4:13 PM
    5. worth waiting for - Peter van Kempen on Oct 13, 2017, 7:23 AM
     
  43. A little project I have embarked on... View Thread - Paul Giles on Oct 11, 2017, 11:16 AM
    1. Interesting - Robert (PL) on Oct 11, 2017, 11:21 AM
      1. Photo-etch? - Paul Giles on Oct 12, 2017, 7:39 AM
        1. Good idea - Robert (PL) on Oct 12, 2017, 10:58 AM
    2. Re: A little project I have embarked on... - Patrick Mondria on Oct 11, 2017, 1:50 PM
      1. My other choice... - Paul Giles on Oct 12, 2017, 7:50 AM
    3. Great - Christian Weber on Oct 12, 2017, 6:06 AM
      1. I certainly will... - Paul Giles on Oct 12, 2017, 7:56 AM
    4. A Challenge - Dan Taylor on Oct 12, 2017, 7:07 AM
      1. Amazing photo... - Paul Giles on Oct 12, 2017, 8:08 AM
        1. Unusual Sherman - Dan Taylor on Oct 12, 2017, 11:24 AM
        2. My thought as well... - Paul Giles on Oct 12, 2017, 1:55 PM
      2. Camouflage? - Andrew Campbell on Oct 12, 2017, 3:50 PM
        1. Re: Camouflage? - Dan Taylor on Oct 12, 2017, 5:25 PM
    5. very interesting! - Kevin Tong on Oct 12, 2017, 9:21 AM
      1. A plethoria of pipes - Paul Giles on Oct 12, 2017, 1:49 PM
        1. well if you're not sure... - Kevin Tong on Oct 13, 2017, 8:23 AM
     
  44. GROUP BUILD 2017.3 - RECCE - Week 10 of 22... View Thread - Paul Giles on Oct 11, 2017, 7:30 AM
    1. Ba-10 with base coat - Piotr Pyrczak on Oct 11, 2017, 8:49 AM
      1. looks very good... - Kevin Tong on Oct 11, 2017, 9:04 AM
      2. Looks Far Better Than Mine... - Tim Marshall on Oct 11, 2017, 10:22 AM
      3. Nice little model... - Paul Giles on Oct 11, 2017, 11:22 AM
      4. paintwork looks great to me... n/t - paul bishop on Oct 11, 2017, 11:28 AM
      5. I like it....... - Dan Rosecrans on Oct 11, 2017, 3:28 PM
      6. Thanks guys! Couple of answers - Piotr Pyrczak on Oct 12, 2017, 1:52 AM
    2. a couple of figures for my Sd. Kfz.250/9 - Kevin Tong on Oct 11, 2017, 9:11 AM
      1. Nice figures... - Paul Giles on Oct 11, 2017, 11:26 AM
        1. thanks Paul - Kevin Tong on Oct 12, 2017, 9:01 AM
      2. those figures really make it - paul bishop on Oct 11, 2017, 11:28 AM
        1. yes... - Kevin Tong on Oct 12, 2017, 9:02 AM
      3. Figures......... - Dan Rosecrans on Oct 11, 2017, 3:29 PM
        1. thanks Dan - Kevin Tong on Oct 12, 2017, 9:03 AM
      4. Nicely painted up figs. n/t - Piotr Pyrczak on Oct 12, 2017, 1:53 AM
        1. thanks Piotr! n/t - Kevin Tong on Oct 12, 2017, 9:03 AM
      5. recommend those figures - Elliott Winthrop on Oct 12, 2017, 3:18 AM
        1. thanks Elliott - Kevin Tong on Oct 12, 2017, 9:04 AM
      6. Re: a couple of figures for my Sd. Kfz.250/9 - Radek Rzeszotarski on Oct 12, 2017, 6:07 AM
        1. thank you Radek... - Kevin Tong on Oct 12, 2017, 9:08 AM
    3. LRC Otter - IBG Models 1:72 - Radek Rzeszotarski on Oct 11, 2017, 4:10 PM
      1. the usual level of wow!! - paul bishop on Oct 12, 2017, 2:06 AM
      2. Re: LRC Otter - IBG Models 1:72 - Elliott Winthrop on Oct 12, 2017, 3:12 AM
      3. Thank you - Jörg Fiedler on Oct 12, 2017, 6:40 AM
      4. shaping up nicely... - Kevin Tong on Oct 12, 2017, 9:11 AM
    4. Italian Recce - Elliott Winthrop on Oct 12, 2017, 3:08 AM
      1. Very nice colection, - Jörg Fiedler on Oct 12, 2017, 6:44 AM
      2. nice work - Kevin Tong on Oct 12, 2017, 9:15 AM
      3. Re: Italian Recce - Radek Rzeszotarski on Oct 13, 2017, 2:25 AM
    5. AMX-10 in 1/72 Model-Miniature. - Jörg Fiedler on Oct 12, 2017, 6:33 AM
      1. Here is the photo - JMehner on Oct 12, 2017, 5:48 PM
     
  45. Site of presentation of Military-Photo-Report books View Thread - Julie Ludmann on Oct 10, 2017, 3:02 PM
  46.  
  47. Old Esci 1/72 Merkava View Thread - Russ Field on Oct 10, 2017, 2:10 PM
    1. From what I can recall.... - Mark Deliduka on Oct 10, 2017, 3:13 PM
      1. Old ESCI - Joel G on Oct 10, 2017, 3:19 PM
        1. Excellent information. - Mark Deliduka on Oct 11, 2017, 2:10 PM
          1. Hey, Mark............ - Dan Rosecrans on Oct 11, 2017, 4:12 PM
            1. Thanks Dan! - Mark Deliduka on Oct 12, 2017, 4:20 PM
    2. A picture........... - Dan Rosecrans on Oct 11, 2017, 3:25 PM
      1. Thanks, but I can't view the pic ... - Russ Field on Oct 11, 2017, 3:39 PM
        1. Sorry, Russ........ - Dan Rosecrans on Oct 11, 2017, 4:27 PM
        2. I can see it fine as well - are you at work or at home? n/m - JMehner on Oct 11, 2017, 5:24 PM
          1. Was at work, now at home ... - Russ Field on Oct 11, 2017, 5:46 PM
    3. Re: Old Esci 1/72 Merkava - Simon Barnes on Oct 11, 2017, 3:54 PM
      1. Great info - thanks! - Russ Field on Oct 12, 2017, 6:04 PM
     
  48. Pics SdKfz 251/17 and 21 and boxart model sale stand View Thread - Alfred van Netburg on Oct 10, 2017, 6:13 AM
    1. Hats off to you, Alfred! - Peter van Kempen on Oct 10, 2017, 7:02 AM
      1. Thx - Alfred van Netburg on Oct 10, 2017, 2:45 PM
    2. very impressive Alfred! - Kevin Tong on Oct 10, 2017, 8:40 AM
      1. Info - Alfred van Netburg on Oct 10, 2017, 2:37 PM
    3. Good lookin h/t's - John lewis on Oct 10, 2017, 10:29 AM
      1. Yep - Alfred van Netburg on Oct 10, 2017, 2:31 PM
    4. Brilliant work! - Mark Deliduka on Oct 10, 2017, 3:17 PM
      1. Thanks - Alfred van Netburg on Oct 11, 2017, 8:09 AM
    5. Good job.......... - Dan Rosecrans on Oct 11, 2017, 4:25 PM
     
  49. TRADING POST - 10.10.2017 View Thread - Paul Giles on Oct 10, 2017, 4:02 AM
    1. Looking for..... - Pete Marshall on Oct 11, 2017, 11:14 AM
      1. That's an optimistic list of wants! - Rob Pye on Oct 11, 2017, 4:11 PM
      2. Fujimi......... - Dan Rosecrans on Oct 11, 2017, 4:50 PM
        1. Options - Pete Marshall on Oct 12, 2017, 2:56 PM
          1. Fujimi Matildas - John Flores on Oct 12, 2017, 10:41 PM
      3. If you don't....... - Dan Rosecrans on Oct 11, 2017, 4:55 PM
    2. Looking For: - Chris Juskey on Oct 11, 2017, 5:15 PM
      1. Preiser Fallschirmjager? - Pete Marshall on Oct 14, 2017, 12:31 PM
     
  50. M60 A2 View Thread - Chris Ekstrom on Oct 9, 2017, 9:31 PM
    1. Me too - Robert (PL) on Oct 9, 2017, 11:28 PM
      1. Robert, check the thread below for my e-mail...(NT) - Matt Ponas on Oct 10, 2017, 1:52 AM
        1. Thank you - Robert (PL) on Oct 10, 2017, 8:13 AM
    2. Conversion - Benjamin Poss on Oct 10, 2017, 2:33 AM
      1. when I get onto my US theme... - paul bishop on Oct 10, 2017, 3:50 AM
    3. Yep, happens to me all the time.... - George Buzby on Oct 13, 2017, 8:58 AM
     
  51. Mauser 1918 T-Gewehr View Thread - Patrick Mondria on Oct 9, 2017, 1:51 PM
    1. very nice - paul bishop on Oct 10, 2017, 3:46 AM
    2. AT gun - Alfred van Netburg on Oct 10, 2017, 5:04 AM
      1. thanks - Patrick Mondria on Oct 10, 2017, 4:02 PM
    3. firing a T-Gewehr - Patrick Mondria on Oct 10, 2017, 5:56 PM
    4. More info and pics - Alfred van Netburg on Oct 11, 2017, 8:21 AM
      1. thanks - Patrick Mondria on Oct 11, 2017, 11:43 AM
     
  52. Arnaud Garnache......... View Thread - Dan Rosecrans on Oct 9, 2017, 12:57 AM
    1. Yesss ! I'm here - Arnaud Garnache on Oct 9, 2017, 3:04 AM
      1. Email sent......... - Dan Rosecrans on Oct 9, 2017, 10:42 AM
     
  53. New First to Fight 1939 - Polish howitzer View Thread - Robert (PL) on Oct 8, 2017, 7:31 PM
    1. Where would we be without FtF?? - Peter van Kempen on Oct 9, 2017, 1:06 PM
      1. Only Polish and Czech guns can be made with that shield, but... - FJCabeza on Oct 9, 2017, 8:04 PM
        1. Donor kit - Tomas Jakl on Oct 10, 2017, 3:05 AM
     
  2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50   Next >> 

Visitors in this forum in the last 10 minutes: 20 Visitors
alfred250251, Doug46, 18 guests


Terms and Conditions of Use
Report abuse