Home > Discussion Groups > Braille Scale

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Warping 40-thou

July 28 2012 at 3:03 AM
Dan Taylor  (Login Dan-Taylor)
Missing-Lynx members
from IP address

Response to Re: Pictures of buildings in progress

Hi Jaymes
40-thou will warp if used by itself. However, there are two things that fix this tendancy. If you fix another piece at righ angles to your original sheet and glue it well, it will not warp. To be on the safe side, I would place side walls and floor/ceilings (even if they are just a beam) to the wall you don't want to warp. The second is laminating: placing a second sheet (even of 20-thou) over the first will prevent warpage.

If that isn't clear let me know and I'll find a way of illustrating it.


 Respond to this message   

Terms and Conditions of Use
Report abuse