Home > Discussion Groups > Braille Scale

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement
 Return to Index  

LVT(A)2

September 5 2012 at 9:25 PM		   (Login Ken-Overby)
Missing-Lynx members
Well I have been putting this off long enough.
First I removed the 3 screw pegs in the bottom.
[IMG][linked image][/IMG]

Then I placed a floor in it.
[IMG][linked image][/IMG]

Then I took one of my casts of the LVT(A)1 and cut off the cab,
here it is placed for fit.
[IMG][linked image][/IMG]

I then made the rear and front Bulkheads.
[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

Next I'll start the Port and Starboard bulkheads, and start detailing the insides.

 
 Respond to this message   
Responses

  1. Do you actually sleep at all..... - Paul Giles on Sep 6, 6:11 AM
    1. Hi Paul - Kenneth Overby on Sep 6, 7:20 AM
      1. Sorry to hear that.... - Paul Giles on Sep 6, 1:21 PM
     
  2. couple more pic's - Kenneth Overby on Sep 6, 11:12 AM
    1. Looks like more great LVT items - Robert O'Donovan on Sep 6, 9:00 PM
     
  3. A few more pic's - Kenneth Overby on Sep 7, 6:12 AM
    4.  
  4. Will this be full kit or conversion? n/t - Jolyon Ralph on Sep 7, 8:19 AM
    1. It will be a conversion....... - Kenneth Overby on Sep 7, 9:25 AM
      1. Another conversion I have to buy... - Dave Flitton on Sep 8, 1:41 AM
     
  5. Since early this morn.......... - Kenneth Overby on Sep 7, 11:35 AM
    6.  
  6. Impressive... - John Shimek on Sep 7, 6:48 PM
    7.  
  7. End of the day's progress.......... - Kenneth Overby on Sep 7, 7:06 PM
    8.  
  8. LVT (A) 2 - Andrew Campbell on Sep 8, 8:41 AM
    9.  


Terms and Conditions of Use Report abuse