Home > Discussion Groups > Braille Scale

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement
 Return to Index  

WEEKLY UPDATE - 14.5.2017

May 14 2017 at 6:51 AM
Paul Giles  (Login Spacewolfdad)
MODERATORS ONLY - Braille
from IP address 176.251.125.169

Consider this your invitation to reply to the WEEKLY UPDATE, with a post of some of your work, whether completed or "in progress" of kits, figures, and dioramas.

This is not a private club or group, anyone and everyone can add to the thread, & is openly encouraged to do so.

All skill levels are encouraged to participate, & everything Braille and relating to this forum is in scope.

There is no need to write a "short story" to accompany any work submitted, though some notes about what you are posting is usually useful (though you may write at length if you wish) and queries for assistance, opinions or advice with a build or kit are encouraged.

Comments are encouraged, be they suggestions, tips, advices, hints, warnings of kit or instruction deficiencies, questions, etc, with the proviso they show the level of respect to the poster and the work they have taken the time to show us, that is customary on the forum.

The intention is that a new WEEKLY UPDATE is created each week on the same day, to allow people to post new pictures and updates of their work, as the original will "move down" and will be hard to find after a week.

The WEEKLY UPDATE is not intended to change how people already use the forum, though anyone is welcome to add their updates and comments, its intent is to draw a few of those who work away on braille scale subjects and seldom or never post, to share some of what they do.

 
 Respond to this message   
Responses

  1. Firefly hybrid Ic WIP - Piotr Pyrczak on May 14, 2017, 9:10 AM
    1. Re: Firefly hybrid Ic WIP - Edern Philippe on May 14, 2017, 12:16 PM
      1. Thanks Phil! n/t - Piotr Pyrczak on May 14, 2017, 2:30 PM
    2. Firefly - John lewis on May 14, 2017, 1:00 PM
      1. Hi John - Piotr Pyrczak on May 14, 2017, 2:40 PM
    3. Very good start, can't wait to see it dressed up... - Graham Mansell on May 14, 2017, 3:42 PM
      1. Thanks Graham n/t - Piotr Pyrczak on May 16, 2017, 6:12 AM
    4. Nice kit bash - paul bishop on May 14, 2017, 4:20 PM
      1. Cheers Paul n/t - Piotr Pyrczak on May 16, 2017, 6:13 AM
    5. Very nice cross-kitting... - Paul Giles on May 14, 2017, 8:40 PM
      1. Thanks Paul - Piotr Pyrczak on May 16, 2017, 6:15 AM
    6. Very nice............ - Dan Rosecrans on May 15, 2017, 1:01 PM
      1. Thanks Dan - Piotr Pyrczak on May 16, 2017, 6:18 AM
    7. Canadian Hybrid Firefly - Elliott Winthrop on May 15, 2017, 11:56 PM
      1. love the fake muzzle brake on the barrel!! n/t - paul bishop on May 16, 2017, 1:48 AM
      2. Hi Elliott - Piotr Pyrczak on May 16, 2017, 6:23 AM
     
  2. this weeks work - paul bishop on May 14, 2017, 9:57 AM
    1. In the country - John lewis on May 14, 2017, 1:03 PM
      1. I know - paul bishop on May 14, 2017, 4:22 PM
    2. Wow, very nice variety, is that truck completely... - Graham Mansell on May 14, 2017, 3:44 PM
      1. thanks ;) - paul bishop on May 14, 2017, 4:23 PM
    3. Nice show of models... - Paul Giles on May 14, 2017, 8:46 PM
      1. Thanks Paul - paul bishop on May 15, 2017, 1:18 AM
    4. Nice models..... - Dan Rosecrans on May 15, 2017, 1:08 PM
      1. good choice - paul bishop on May 15, 2017, 2:42 PM
    5. Re: this weeks work - jan willem bakker on May 15, 2017, 2:13 PM
      1. thanks Jan n/t - paul bishop on May 15, 2017, 2:43 PM
    6. Ordered mine - Jörg Fiedler on May 16, 2017, 6:14 AM
      1. took me a year... - paul bishop on May 16, 2017, 1:58 PM
     
  3. Pz.Kpfw 38H735(f).S Model - Edern Philippe on May 14, 2017, 12:14 PM
    1. S model - John lewis on May 14, 2017, 1:05 PM
    2. Just goes to show those S-Model kits dress up very... - Graham Mansell on May 14, 2017, 3:46 PM
    3. looks great - paul bishop on May 14, 2017, 4:27 PM
    4. Very nice indeed... - Paul Giles on May 14, 2017, 8:50 PM
      1. Thanks - EDERN Philippe on May 15, 2017, 5:05 AM
    5. Hooks and Holes - Tim Marshall on May 14, 2017, 11:02 PM
      1. Re: Hooks and Holes - EDERN Philippe on May 15, 2017, 5:08 AM
    6. Some nice...... - Dan Rosecrans on May 15, 2017, 1:30 PM
    7. Clean build ! - Jörg Fiedler on May 15, 2017, 4:32 PM
     
  4. e100 with rheintochter - jan willem bakker on May 14, 2017, 1:26 PM
    1. Beautiful paint job - John lewis on May 14, 2017, 3:06 PM
    2. Very interesting paint work on the shield, what... - Graham Mansell on May 14, 2017, 3:50 PM
    3. quality work - paul bishop on May 14, 2017, 4:30 PM
    4. worst Union Jack I have ever seen!! - Mike Durand on May 14, 2017, 9:45 PM
      1. Ha ha - John lewis on May 14, 2017, 11:20 PM
    5. Unfortunately... - Paul Giles on May 15, 2017, 4:11 AM
    6. thanks guys! - jan willem bakker on May 15, 2017, 2:09 PM
    7. Great paintjob and - Jörg Fiedler on May 15, 2017, 4:29 PM
      1. Re: Great paintjob and - jan willem bakker on May 15, 2017, 5:05 PM
     
  5. One show down, one to go this month, so not much... - Graham Mansell on May 14, 2017, 3:40 PM
    1. looks good - paul bishop on May 14, 2017, 4:32 PM
    2. Fiddly... - Paul Giles on May 15, 2017, 4:22 AM
    3. Nice job, so far........ - Dan Rosecrans on May 15, 2017, 1:37 PM
     
  6. Just one Wolf - Jörg Fiedler on May 14, 2017, 6:02 PM
    1. Great!! - John lewis on May 14, 2017, 6:29 PM
      1. Thx John - Jörg Fiedler on May 15, 2017, 4:11 PM
    2. Very nice - August I Versiani on May 14, 2017, 9:06 PM
      1. HI August, - Jörg Fiedler on May 15, 2017, 4:12 PM
    3. stunning painting n/t - paul bishop on May 15, 2017, 1:18 AM
      1. Thx Paul ! - Jörg Fiedler on May 15, 2017, 4:12 PM
    4. Perfect... - Paul Giles on May 15, 2017, 4:27 AM
      1. Thank you Paul, - Jörg Fiedler on May 15, 2017, 4:16 PM
    5. most excellent! - Kevin Tong on May 15, 2017, 8:13 AM
      1. Thx Kevin ! - Jörg Fiedler on May 15, 2017, 4:16 PM
    6. Out-standing rendering.........Dan...n/t - Dan Rosecrans on May 15, 2017, 1:40 PM
      1. Tank you Dan ! - Jörg Fiedler on May 15, 2017, 4:18 PM
    7. Love it - Elliott Winthrop on May 16, 2017, 12:18 AM
     
  7. Mirage Grant Mk 1 pt.6... - Paul Giles on May 14, 2017, 8:29 PM
    1. Re: Mirage Grant Mk 1 pt.6... - August I Versiani on May 14, 2017, 8:54 PM
      1. Thanks Augusto... - Paul Giles on May 15, 2017, 4:43 AM
    2. Grant build - John lewis on May 14, 2017, 9:10 PM
      1. Brushes... - Paul Giles on May 15, 2017, 4:57 AM
    3. That's looking great. - al magnus on May 14, 2017, 11:38 PM
      1. Thanks Al... - Paul Giles on May 15, 2017, 6:19 AM
    4. love it - paul bishop on May 15, 2017, 1:20 AM
      1. Is it the hat? - Paul Giles on May 15, 2017, 6:27 AM
    5. nice work! - Kevin Tong on May 15, 2017, 8:19 AM
      1. Thanks Kevin... - Paul Giles on May 16, 2017, 6:03 AM
    6. Very nice.......... - Dan Rosecrans on May 15, 2017, 1:45 PM
      1. Thanks Dan... - Paul Giles on May 16, 2017, 6:06 AM
    7. Great cammo on - Jörg Fiedler on May 15, 2017, 4:22 PM
      1. Thanks Jörg... - Paul Giles on May 16, 2017, 8:37 AM
    8. Just not cricket - Elliott Winthrop on May 16, 2017, 12:34 AM
      1. Thanks Elliott... - Paul Giles on May 16, 2017, 6:23 AM
        1. Hatch - Elliott Winthrop on May 16, 2017, 2:55 PM
     
  8. ISU 122 "Snap Fit" Zvezda 1/72 Done - August I Versiani on May 14, 2017, 8:50 PM
    1. Very nice - John lewis on May 14, 2017, 9:12 PM
      1. Re: Very nice - Augusto I Versiani on May 15, 2017, 9:35 AM
    2. Great little build. - al magnus on May 14, 2017, 11:40 PM
      1. Re: Great little build. - Augusto I Versiani on May 15, 2017, 9:37 AM
    3. doesn't look like a quick build - paul bishop on May 15, 2017, 1:21 AM
      1. Re: doesn't look like a quick build - Augusto I Versiani on May 15, 2017, 9:46 AM
    4. Very nice indeed... - Paul Giles on May 15, 2017, 6:36 AM
      1. Re: Very nice indeed... - Augusto I Versiani on May 15, 2017, 9:43 AM
        1. Got some of those... - Paul Giles on May 15, 2017, 2:06 PM
    5. Well done and inspirational! - Kevin Tong on May 15, 2017, 8:21 AM
      1. Re: Well done and inspirational! - Augusto I Versiani on May 15, 2017, 9:45 AM
    6. This is........ - Dan Rosecrans on May 15, 2017, 1:52 PM
      1. Re: This is........ - Augusto I Versiani on May 15, 2017, 3:20 PM
    7. Re: ISU 122 "Snap Fit" Zvezda 1/72 Done - jan willem bakker on May 15, 2017, 2:15 PM
      1. Re: ISU 122 "Snap Fit" Zvezda 1/72 Done - Augusto I Versiani on May 15, 2017, 3:26 PM
    8. This is - Jörg Fiedler on May 15, 2017, 4:19 PM
      1. Re: This is - Augusto I Versiani on May 15, 2017, 10:04 PM
    9. Wow! - Joel on May 16, 2017, 10:34 AM
     
  9. Sherman at El Alamein - Tim Greeman on May 15, 2017, 11:19 AM
    1. Nice start...... - Dan Rosecrans on May 15, 2017, 2:01 PM
      1. Africa, 1942 - Tim Greeman on May 15, 2017, 3:44 PM
    2. Nice conversion - Piotr Pyrczak on May 15, 2017, 2:18 PM
      1. Thank you for the help - will make some changes - Tim Greeman on May 15, 2017, 3:41 PM
    3. like it - paul bishop on May 15, 2017, 2:47 PM
    4. Combo - Elliott Winthrop on May 16, 2017, 12:47 AM
      1. That looks exactly right - Tim Greeman on May 16, 2017, 10:51 AM
        1. Re: That looks exactly right - Elliott Winthrop on May 17, 2017, 8:03 PM
    5. Looking good! - Dave Rhodes on May 16, 2017, 2:56 PM
    6. Oh please get the pattern right. - Mike Starmer on May 19, 2017, 3:14 PM
     


Terms and Conditions of Use
Report abuse