Home > Discussion Groups > Braille Scale

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement


Braille Scale Discussion Group

Hosted by Paul Giles, this discussion group is dedicated to 1/72 scale and smaller AFV modelling.
Not logged in | Login | Create AccountSearch    Chat!    Home    Post Message
  1. FtF magazine nr 37 shows early Sdkfz11 as tow vehicle... View Thread - peter van kempen on Nov 7, 2016, 6:04 PM
    1. Re: FtF magazine nr 37 shows early Sdkfz11 as tow vehicle... - Petr Vanek on Nov 8, 2016, 1:50 AM
    2. Re: FtF magazine nr 37 shows early Sdkfz11 as tow vehicle... - Radek Rzeszotarski on Nov 8, 2016, 2:43 AM
      1. Re: FtF magazine nr 37 shows early Sdkfz11 as tow vehicle... - Petr Vanek on Nov 8, 2016, 3:12 AM
        1. translation. - peter van kempen on Nov 8, 2016, 3:39 AM
        2. Re: FtF magazine nr 37 shows early Sdkfz11 as tow vehicle... - Radek Rzeszotarski on Nov 8, 2016, 4:18 AM
          1. Not stupid, Radek!! - peter van kempen on Nov 8, 2016, 9:06 AM
            1. spelling... - Rob Searson on Nov 8, 2016, 10:40 AM
        3. you are right - Robert (PL) on Nov 8, 2016, 2:25 PM
    3. Scale. - Dave Rhodes on Nov 8, 2016, 3:46 AM
      1. Re: Scale. - Radek Rzeszotarski on Nov 8, 2016, 4:23 AM
        1. The Revell kit too... - Peter Sisung on Nov 8, 2016, 6:53 AM
          1. Old Chestnut! - Dave Rhodes on Nov 8, 2016, 9:17 AM
      2. Scale of the FtF Pz.III - Konstantin Kulakovsky on Nov 8, 2016, 3:13 PM
        1. calculator! - Dave Rhodes on Nov 8, 2016, 4:56 PM
        2. So, we may expect FTF halftracks to be good use for 1/72 fans - peter van kempen on Nov 8, 2016, 5:33 PM
      3. Re: Scale. - Neil Lyall on Nov 9, 2016, 2:44 AM
        1. Inclination. - Dave Rhodes on Nov 9, 2016, 4:03 AM
          1. Re: Inclination. - Radek Rzeszotarski on Nov 9, 2016, 6:09 AM
        2. I thought it was funny... - Paul Giles on Nov 10, 2016, 7:23 AM
    4. WHEN WHEN WHEN??? - john lewis on Nov 8, 2016, 7:16 PM
      1. following the issue of the early Sdkfz 251 rivetted , announced allready . - peter van kempen on Nov 9, 2016, 4:37 PM
        1. 75mm Gun? - George Buzby on Nov 10, 2016, 10:00 AM
          1. Same gun as edition 33 but with pneumatic tires,I believe - peter van kempen on Nov 10, 2016, 6:20 PM
     
  2. Zvezda NEWS-2017 View Thread - Konstantin Kulakovsky on Nov 7, 2016, 12:35 PM
    1. Tunguska! - Dave Rhodes on Nov 7, 2016, 1:54 PM
      1. it's the "Terminator" - Tim Neate on Nov 7, 2016, 2:27 PM
        1. Yes, it's "Terminator" - Konstantin Kulakovsky on Nov 7, 2016, 3:12 PM
    2. Zvedza releases - Charlie Martin on Nov 7, 2016, 3:23 PM
      1. Impossible! - Konstantin Kulakovsky on Nov 7, 2016, 3:49 PM
      2. Why bother? - Simon Barnes on Nov 9, 2016, 8:15 AM
    3. thanks for posting, every new issue from them is wellcome! - peter van kempen on Nov 7, 2016, 4:46 PM
    4. Wonder who will be first with the Iskander? - Simon Barnes on Nov 8, 2016, 6:59 AM
     
  3. QUICK QUIZ - 1.11.16 - Winner... View Thread - Paul Giles on Nov 7, 2016, 6:51 AM
    1. Congrats Tim! - Tomas Jakl on Nov 7, 2016, 7:27 AM
    2. Want to let you know here, that I hugely enjoy this quizz so thanks! - peter van kempen on Nov 7, 2016, 4:58 PM
    3. Thanks guys - Tim James on Nov 8, 2016, 5:43 AM
     
  4. Anyone going to the On Track show 25 February, 2017? View Thread - Tony Ivey on Nov 6, 2016, 7:49 PM
    1. Re: Anyone going to the On Track show 25 February, 2017? - Grant Parkin on Nov 7, 2016, 4:20 AM
    2. On Track - Chris Grove on Nov 7, 2016, 5:02 PM
      1. Hi Chris - Tony Ivey on Nov 8, 2016, 7:42 PM
    3. Me too - Mike Starmer on Nov 8, 2016, 12:53 PM
      1. Hello Mike - Tony Ivey on Nov 8, 2016, 7:44 PM
    4. On Track - Phill Smith on Nov 8, 2016, 1:04 PM
      1. Yep - Les Freathy on Nov 8, 2016, 2:39 PM
        1. Hi Les - Tony Ivey on Nov 8, 2016, 8:13 PM
      2. Hi Phill - Tony Ivey on Nov 8, 2016, 8:11 PM
        1. On track - Richard Allebone on Nov 9, 2016, 5:38 AM
     
  5. WEEKLY UPDATE - 06.11.2016 View Thread - Paul Giles on Nov 6, 2016, 6:41 AM
    1. PSC truck update - Neil Lyall on Nov 6, 2016, 7:07 AM
      1. Re: PSC truck update - Grant Parkin on Nov 6, 2016, 7:34 AM
        1. Nice work... - Paul Giles on Nov 6, 2016, 8:28 AM
      2. postimage org seems to work well... and i like the pics, now the finish! - peter van kempen on Nov 6, 2016, 10:12 AM
      3. nice looking trucks - john lewis on Nov 6, 2016, 10:25 AM
      4. looking good - paul bishop on Nov 6, 2016, 11:57 AM
      5. You are missing a ] after the first [img, should be [img] - JMehner on Nov 6, 2016, 1:17 PM
      6. Good so far - Ilian Filipov on Nov 6, 2016, 8:04 PM
      7. Wouldn't mind a discourse . . . - David Clark on Nov 7, 2016, 3:09 AM
      8. Re: PSC truck update - Fred A. Berganio on Nov 7, 2016, 11:43 AM
    2. Panzerjager 1 (S-Models/Moxing Studio) - Andrew Lang on Nov 6, 2016, 8:31 AM
      1. very nice upgrade - john lewis on Nov 6, 2016, 10:22 AM
        1. John - Yes, they are included - Andrew Lang on Nov 6, 2016, 10:27 AM
      2. 1/72 panzer i resin tracks - Rob Searson on Nov 6, 2016, 12:18 PM
      3. looking great - Patrick Mondria on Nov 6, 2016, 3:56 PM
      4. Nice work! - David Clark on Nov 7, 2016, 3:16 AM
      5. Re: Panzerjager 1 (S-Models/Moxing Studio) - Fred A. Berganio on Nov 7, 2016, 11:49 AM
      6. nice work with interesting conversion - Robert Kru on Nov 8, 2016, 3:01 PM
    3. Langley Green's DRM Mk1 Diesel Roller - David Clark on Nov 6, 2016, 9:12 AM
      1. different - john lewis on Nov 6, 2016, 10:15 AM
      2. Good finish: strong impression of a heavy thing with steel wheels. - peter van kempen on Nov 6, 2016, 10:15 AM
      3. love it!!!! - paul bishop on Nov 6, 2016, 11:16 AM
        1. Brew - David Clark on Nov 6, 2016, 5:19 PM
          1. and maybe a brazier to keep them warm... - paul bishop on Nov 7, 2016, 1:06 AM
      4. RAF/RAAF? - Ilian Filipov on Nov 6, 2016, 8:29 PM
        1. Re: RAF/RAAF? - David Clark on Nov 6, 2016, 11:20 PM
      5. Unusual and Neat - Fred A. Berganio on Nov 7, 2016, 11:53 AM
      6. Re: Langley Green's DRM Mk1 Diesel Roller - Brent Watterson on Nov 7, 2016, 11:11 PM
    4. Small update this week - paul bishop on Nov 6, 2016, 11:15 AM
      1. Normandy Sherman.. - Rob Searson on Nov 6, 2016, 12:11 PM
      2. You might want to turn the front intake 180° horizontally. ;-) n/m - JMehner on Nov 6, 2016, 1:15 PM
        1. oh yes...well spotted n/t - Paul bishop on Nov 6, 2016, 4:17 PM
      3. Re: Small update this week - David Clark on Nov 7, 2016, 3:20 AM
        1. well... - paul bishop on Nov 7, 2016, 2:58 PM
      4. Re: Small update this week - Fred A. Berganio on Nov 7, 2016, 12:00 PM
      5. Re: Small update this week - Brent Watterson on Nov 7, 2016, 11:08 PM
    5. Carden-Loyd Mark 1,2,3 one man tank part 4 - Patrick Mondria on Nov 6, 2016, 12:26 PM
      1. Excellent. - Dave Rhodes on Nov 6, 2016, 6:21 PM
        1. Re: Excellent. - Patrick Mondria on Nov 7, 2016, 1:59 PM
      2. Amazing! - David Clark on Nov 7, 2016, 3:23 AM
        1. Re: Amazing! - Patrick Mondria on Nov 7, 2016, 2:02 PM
      3. Re: Carden-Loyd Mark 1,2,3 one man tank part 4 - Fred A. Berganio on Nov 7, 2016, 12:02 PM
        1. Re: Carden-Loyd Mark 1,2,3 one man tank part 4 - Patrick Mondria on Nov 7, 2016, 2:04 PM
      4. Excellent and tiny scratchbuilding - Robert Kru on Nov 8, 2016, 3:06 PM
        1. procreate - Patrick Mondria on Nov 8, 2016, 4:50 PM
    6. UM M36 Jackson WIP - Fred A. Berganio on Nov 6, 2016, 2:14 PM
      1. lovely work - Paul bishop on Nov 6, 2016, 4:31 PM
        1. Tiny detail - Fred A. Berganio on Nov 7, 2016, 12:21 PM
      2. Re: UM M36 Jackson WIP - David Clark on Nov 7, 2016, 3:26 AM
        1. Re: UM M36 Jackson WIP - Fred A. Berganio on Nov 7, 2016, 12:24 PM
      3. Re: UM M36 Jackson WIP - Carl Mueck on Nov 7, 2016, 8:07 AM
        1. Re: UM M36 Jackson WIP - Fred A. Berganio on Nov 7, 2016, 12:26 PM
      4. M36 - Brent Watterson on Nov 7, 2016, 11:06 PM
        1. Re: M36 - Fred A. Berganio on Nov 8, 2016, 12:05 PM
          1. Time - Brent Watterson on Nov 9, 2016, 1:09 AM
    7. Lion of Babylon, continued.. - Matt Reeves on Nov 6, 2016, 7:13 PM
      1. Re: Lion of Babylon, continued.. - David Clark on Nov 7, 2016, 12:29 AM
        1. Fuel drums.. - Matt Reeves on Nov 7, 2016, 1:04 PM
      2. coming together nicely - paul bishop on Nov 7, 2016, 1:09 AM
        1. Dazzler.. - Matt Reeves on Nov 7, 2016, 1:02 PM
      3. Re: Lion of Babylon, continued.. - Fred A. Berganio on Nov 7, 2016, 12:04 PM
        1. Indeed, Fred, thanks for the kind words and inspiration! - NT - Matt Reeves on Nov 7, 2016, 12:39 PM
    8. Torti - Brent Watterson on Nov 6, 2016, 8:31 PM
      1. nice - paul bishop on Nov 7, 2016, 1:10 AM
        1. 1/56th - Brent Watterson on Nov 7, 2016, 3:42 AM
          1. aha makes sense ;) n/t - paul bishop on Nov 7, 2016, 2:55 PM
      2. Re: Torti - David Clark on Nov 7, 2016, 3:32 AM
        1. Diecasts - Brent Watterson on Nov 7, 2016, 3:45 AM
      3. Re: Torti - Grant Parkin on Nov 7, 2016, 4:17 AM
        1. Cast texture - Brent Watterson on Nov 7, 2016, 4:29 AM
      4. Re: Torti - Fred A. Berganio on Nov 7, 2016, 12:12 PM
    9. My "Feger" got some improvements - Robert Kru on Nov 7, 2016, 6:34 AM
      1. Re: My "Feger" got some improvements - Carl Mueck on Nov 7, 2016, 8:00 AM
      2. Re: My "Feger" got some improvements - Fred A. Berganio on Nov 7, 2016, 12:16 PM
      3. fantastic upgrades! - paul bishop on Nov 8, 2016, 2:23 AM
      4. cool - jan willem bakker on Nov 8, 2016, 7:19 AM
      5. super - Patrick Mondria on Nov 8, 2016, 11:26 AM
      6. Feger - Robert Kru on Nov 8, 2016, 2:57 PM
      7. Feger - Brent Watterson on Nov 9, 2016, 1:12 AM
    10. small update - jan willem bakker on Nov 7, 2016, 7:04 AM
      1. Re: small update - Carl Mueck on Nov 7, 2016, 8:04 AM
      2. Re: small update - Fred A. Berganio on Nov 7, 2016, 12:18 PM
      3. Re: small update - jan willem bakker on Nov 8, 2016, 7:20 AM
      4. Very nice built - Robert Kru on Nov 8, 2016, 3:11 PM
        1. Re: Very nice built - jan willem bakker on Nov 9, 2016, 3:13 PM
     
  6. Source for 1/72 L7/MAG58 GPMGs? View Thread - David Edwards on Nov 6, 2016, 2:53 AM
    1. MINI WORLD - Marc Mercier on Nov 6, 2016, 7:43 AM
     
  7. PE/resin for Revell Sd.Kfz 7/2? View Thread - Niko Asposalo on Nov 5, 2016, 5:16 PM
    1. I think I have that set at home - paul bishop on Nov 6, 2016, 3:20 AM
      1. Paul, I appreciate that:)n/t - Niko Asposalo on Nov 6, 2016, 2:18 PM
    2. Same question - Antonio Almeida on Nov 6, 2016, 5:35 PM
     
  8. Bovington 2017 View Thread - Bas Slaats on Nov 4, 2016, 7:15 PM
  9.  
  10. Thinking of going to IMPS Telford...it is worth the effort and expense? View Thread - Rob Pye on Nov 4, 2016, 6:52 PM
    1. Apart from the fact... - Paul Giles on Nov 4, 2016, 7:57 PM
      1. The link to the show... - Paul Giles on Nov 4, 2016, 8:07 PM
      2. Parking tips - Graham Boak on Nov 5, 2016, 6:55 AM
    2. Re: Thinking of going to IMPS Telford...it is worth the effort and expense? - Andrew Deeley on Nov 5, 2016, 6:26 AM
    3. Experience. - Dave Rhodes on Nov 5, 2016, 7:29 AM
    4. Thanks much for the input... - Rob Pye on Nov 5, 2016, 2:19 PM
     
  11. COMPETITION 2016-17 - NEW OWNERS - Week 6 of 28... View Thread - Paul Giles on Nov 4, 2016, 2:28 PM
    1. Chevrolet C15A with Breda - Tim Greeman on Nov 5, 2016, 8:24 AM
      1. Breda. - Dave Rhodes on Nov 5, 2016, 4:56 PM
        1. DOH! - Dave Rhodes on Nov 5, 2016, 6:51 PM
      2. Excellent little model... - Paul Giles on Nov 5, 2016, 8:12 PM
     
  12. Loads of new bits from OKB...including Pz I tracks & wheel set!!!! View Thread - Rob Pye on Nov 3, 2016, 5:24 PM
    1. panther sprocket question - Bas Slaats on Nov 4, 2016, 6:01 AM
      1. I'll give it a shot... - Paul Giles on Nov 4, 2016, 8:05 AM
        1. ...Not sure about this Paul.... - Rob Pye on Nov 4, 2016, 12:39 PM
          1. 17 tooth type 1 - Bas Slaats on Nov 4, 2016, 1:43 PM
            1. Your question - Rob Pye on Nov 4, 2016, 4:45 PM
              1. good to know - Bas Slaats on Nov 4, 2016, 7:13 PM
    2. OKB update - Fred A. Berganio on Nov 4, 2016, 12:12 PM
     
  13. IPMS (UK) - SCALE MODEL WORLD 2016 - TELFORD12th/13th November. View Thread - Stefan Zadziuk (Login stefzadziuk) on Nov 3, 2016, 3:36 PM
    1. Pretty please... - JMehner on Nov 3, 2016, 5:57 PM
      1. Re: Pretty please... - Stefan Zadziuk on Nov 3, 2016, 9:46 PM
    2. I'll be there both days. - Jaymes Crowther on Nov 5, 2016, 5:56 AM
      1. Re: I'll be there both days. - Stefan Zadziuk on Nov 6, 2016, 9:42 AM
    3. IPMS Scale Model World Telford - Phill Smith on Nov 5, 2016, 3:08 PM
      1. Re: IPMS Scale Model World Telford - Stefan Zadziuk on Nov 6, 2016, 9:45 AM
        1. IPMS Scale Model World Telford - Phill Smith on Nov 6, 2016, 11:27 AM
     
  14. new release for 4D models View Thread - Ric Montgomery on Nov 3, 2016, 7:20 AM
    1. Imports. - Dave Rhodes on Nov 3, 2016, 10:51 AM
      1. Zedval shop - Bas Slaats on Nov 4, 2016, 6:04 AM
    2. Aliexpress - F. Giovagnorio on Nov 3, 2016, 12:27 PM
      1. Thank you. - Dave Rhodes on Nov 4, 2016, 12:17 PM
    3. Cut n shut two to make Topol-M ? :) - Haydn Neal on Nov 4, 2016, 6:00 AM
      1. M.O.T. - Dave Rhodes on Nov 4, 2016, 7:06 AM
     
  15. IBG Type 89 pics, many... View Thread - Peter Sisung on Nov 2, 2016, 10:06 PM
    1. What is it with IBG and tracks?? - Douglas Edsall on Nov 2, 2016, 10:15 PM
      1. Actually.......... - Dan Rosecrans on Nov 3, 2016, 9:53 AM
        1. Ah, My Mistake! Thanks! - Douglas Edsall on Nov 4, 2016, 3:39 AM
          1. Are the Toldi tracks really that bad? - PatBeirter on Nov 4, 2016, 10:21 AM
            1. Re: Are the Toldi tracks really that bad? - Fred A. Berganio on Nov 4, 2016, 12:37 PM
    2. I will be getting one... - Paul Giles on Nov 3, 2016, 10:29 AM
    3. More akin to early pattern tracks - Andrew Lang on Nov 3, 2016, 11:24 AM
    4. No pics today - Mike Durand on Nov 4, 2016, 10:23 AM
      1. Re: No pics today - Mike Dougherty on Nov 4, 2016, 1:11 PM
     
  16. Flak 37 finished! View Thread - T-izumi on Nov 2, 2016, 10:36 AM
    1. Incredible!! - Neil Craig on Nov 2, 2016, 11:42 AM
    2. 72 scale? - Dave Rhodes on Nov 2, 2016, 1:49 PM
    3. really impressive - paul bishop on Nov 2, 2016, 3:39 PM
    4. Exceptional work... - Paul Giles on Nov 2, 2016, 4:28 PM
    5. Excellent gun. - al magnus on Nov 2, 2016, 4:35 PM
      1. very nice - Les Freathy on Nov 2, 2016, 6:14 PM
    6. Re: Flak 37 - Dan Taylor on Nov 3, 2016, 3:51 AM
      1. Thanks all! - T-izumi on Nov 3, 2016, 10:24 AM
        1. Thanks T-izumi. - al magnus on Nov 5, 2016, 11:22 AM
    7. !!!!!!! - Tom Fiocchi on Nov 3, 2016, 3:56 PM
    8. Re: Flak 37 finished! - Brian Crowley on Nov 4, 2016, 9:09 PM
      1. Re: Flak 37 finished! - T-izumi on Nov 5, 2016, 10:48 AM
     
  17. Did Zvezda do a 1/72 King Tiger ? View Thread - David Nickels on Nov 2, 2016, 10:25 AM
    1. Announced in 2013 - Jeff Hamblen on Nov 2, 2016, 11:54 AM
      1. Re: Announced in 2013 - Grant Parkin on Nov 3, 2016, 3:11 AM
    2. Not yet - Konstantin Kulakovsky on Nov 2, 2016, 4:43 PM
      1. Well none are readily available here - David Nickels on Nov 2, 2016, 5:38 PM
    3. Re: Did Zvezda do a 1/72 King Tiger ? - Radek Rzeszotarski on Nov 3, 2016, 5:09 AM
      1. Quite disappointing given the price - David Nickels on Nov 3, 2016, 8:28 AM
        1. high price stimulates real modelling, as when I was a kid. - peter van kempen on Nov 3, 2016, 5:28 PM
        2. You can get the Dragon "Orange Box" Tiger II for less than $15 US - David O'Barr on Nov 3, 2016, 6:48 PM
          1. I just found out about that one - David Nickels on Nov 4, 2016, 8:51 AM
            1. On sale now for $8.95 - David O'Barr on Nov 4, 2016, 8:27 PM
     
  18. I think I've cracked it... View Thread - Paul Giles on Nov 2, 2016, 9:50 AM
    1. Re: I think I've cracked it... - Mike Dougherty on Nov 2, 2016, 10:13 AM
      1. Dusty Italian road... - Paul Giles on Nov 3, 2016, 6:37 AM
    2. Excellent Job! - Neil Craig on Nov 2, 2016, 11:46 AM
      1. It's your fault really... - Paul Giles on Nov 3, 2016, 6:39 AM
    3. If at first you don't succeed... - Fred A. Berganio on Nov 2, 2016, 12:55 PM
      1. I know the feeling... - Paul Giles on Nov 3, 2016, 10:33 AM
    4. Impressive effort, real modelling. - peter van kempen on Nov 2, 2016, 3:21 PM
      1. Thanks Peter... - Paul Giles on Nov 3, 2016, 6:41 AM
    5. now that is DEDICATION!!! - paul bishop on Nov 2, 2016, 3:41 PM
      1. Verging on obsession... - Paul Giles on Nov 3, 2016, 6:44 AM
    6. Tread looks great. - al magnus on Nov 2, 2016, 4:37 PM
      1. I will think about that... - Paul Giles on Nov 3, 2016, 6:46 AM
    7. Well done! - David Clark on Nov 2, 2016, 5:56 PM
      1. Great minds... - Paul Giles on Nov 2, 2016, 6:10 PM
    8. Diamonds are forever - Ilian Filipov on Nov 2, 2016, 6:45 PM
      1. Thanks for that Ilian... - Paul Giles on Nov 3, 2016, 6:59 AM
    9. You need to get out more... - Stefan Zadziuk on Nov 2, 2016, 6:50 PM
      1. "Handed"? - Ilian Filipov on Nov 2, 2016, 8:38 PM
        1. 'Handed' = directional tread - David Clark on Nov 2, 2016, 9:38 PM
          1. Thanks! - Ilian Filipov on Nov 3, 2016, 2:18 AM
            1. Handed - David Clark on Nov 4, 2016, 12:29 AM
      2. Retrokit - David Clark on Nov 2, 2016, 9:23 PM
        1. Re: Retrokit - Stefan Zadziuk on Nov 3, 2016, 8:59 AM
          1. Re: Retrokit - David Clark on Nov 4, 2016, 12:25 AM
      3. Hunched over my modelling area... - Paul Giles on Nov 3, 2016, 7:10 AM
        1. Re: Hunched over my modelling area... - Stefan Zadziuk on Nov 3, 2016, 1:50 PM
          1. Not a problem... - Paul Giles on Nov 3, 2016, 3:46 PM
    10. excellent work - Patrick Mondria on Nov 3, 2016, 1:28 PM
      1. My thanks to you actually... - Paul Giles on Nov 3, 2016, 3:56 PM
     
  19. BRAILLE SCALE GROUP BUILD 2016.4 - 75+ Week 8 of 15 View Thread - Paul Giles on Nov 2, 2016, 7:45 AM
    1. Saipan M2A1 finished! (a bit pic heavy) - Piotr Pyrczak on Nov 2, 2016, 8:29 AM
      1. That tank is toast... - Paul Giles on Nov 2, 2016, 9:57 AM
      2. Where is the gunner? - Robert Kru on Nov 2, 2016, 11:40 AM
      3. Very lively scene - JMehner on Nov 2, 2016, 1:20 PM
      4. neat dio - john lewis on Nov 2, 2016, 3:35 PM
        1. History comes alive - peter van kempen on Nov 2, 2016, 5:34 PM
      5. Great Little Dio - Fred A. Berganio on Nov 3, 2016, 12:50 PM
      6. Thanks guys! - Piotr Pyrczak on Nov 3, 2016, 4:09 PM
    2. ACE Centurion Mk 5/1 part 3 - Will Alcott on Nov 2, 2016, 1:19 PM
      1. really like this - paul bishop on Nov 2, 2016, 3:46 PM
      2. Water cans - Chris Grove on Nov 2, 2016, 4:08 PM
        1. The Aussies had their own green plastic water can - Paul bishop on Nov 2, 2016, 4:26 PM
          1. Australian Water Cans - Al Bowie on Nov 2, 2016, 4:34 PM
    3. next artillery piece started for the group build - al magnus on Nov 2, 2016, 3:10 PM
      1. great family photo!! - john lewis on Nov 2, 2016, 3:30 PM
    4. started number 3 - john lewis on Nov 2, 2016, 3:48 PM
    5. OKB Grigorov M109 part 5 - Will Alcott on Nov 2, 2016, 10:45 PM
      1. simply stunning - paul bishop on Nov 3, 2016, 11:36 AM
     
  20. TRADING POST - 1.11.2016 View Thread - Paul Giles on Nov 1, 2016, 7:07 PM
    1. Sorry folks... - Paul Giles on Nov 1, 2016, 7:08 PM
    2. S-Model M3A1 37mm GUN - Arie Vos on Nov 2, 2016, 3:58 AM
      1. I will take one - Jeff Hamblen on Nov 2, 2016, 4:23 AM
        1. Re: I will take one - Arie Vos on Nov 2, 2016, 5:15 AM
          1. email sent n/t - Jeff Hamblen on Nov 2, 2016, 5:33 AM
    3. SELL: - David Pérez del Palomar on Nov 2, 2016, 4:21 AM
    4. SWAP: My FtF for your S-Models Panzer II Beo or ausf. C - Jeff Hamblen on Nov 3, 2016, 6:24 AM
     
  21. Revall T55 View Thread - Dave Rhodes on Nov 1, 2016, 6:03 PM
    1. Will collect mine from shop to-morrow. Its released allright. - peter van kempen on Nov 3, 2016, 5:49 PM
      1. First look: great spider wheel details, inside and out. tracks :so so. - peter van kempen on Nov 4, 2016, 1:50 PM
     
  22. Tuesday Exchange! View Thread - Dave Rhodes on Nov 1, 2016, 5:53 PM
    1. I can help - Jeff Hamblen on Nov 2, 2016, 4:35 AM
      1. Sorted! - Dave Rhodes on Nov 2, 2016, 1:46 PM
     
  23. Ajax 36 - as promised a Braille update - 23 pics... View Thread - Graham Mansell on Nov 1, 2016, 2:05 PM
    1. Ajax - James Morgan on Nov 1, 2016, 2:41 PM
      1. looks like a decent show - paul bishop on Nov 1, 2016, 5:03 PM
    2. Thanks Graham... - Paul Giles on Nov 1, 2016, 5:10 PM
     
  24. QUICK QUIZ - 1.11.16 View Thread - Paul Giles on Oct 31, 2016, 9:55 PM
    1. Re: QUICK QUIZ - 1.11.16 - David Clark on Nov 1, 2016, 8:31 AM
      1. Just right for the School Run... - Paul Giles on Nov 1, 2016, 12:49 PM
     
  25. IPMS (UK) - SCALE MODEL WORLD 2016 - TELFORD View Thread - Stefan Zadziuk on Oct 31, 2016, 9:10 PM
    1. Thanks for posting this Stefan... - Paul Giles on Oct 31, 2016, 9:22 PM
    2. Telford - Rod Woodhouse on Nov 1, 2016, 4:32 AM
      1. Re: Telford - Stefan Zadziuk on Nov 2, 2016, 6:10 PM
    3. Count me in - Marc Mercier on Nov 2, 2016, 3:01 AM
      1. Re: Count me in - Stefan Zadziuk on Nov 2, 2016, 6:11 PM
    4. Calling Phil Smith and Ley Reynolds... - Paul Giles on Nov 2, 2016, 11:38 AM
    5. I'm Planning to be there on Saturday - Tim Neate on Nov 2, 2016, 3:30 PM
      1. Re: I'm Planning to be there on Saturday - Stefan Zadziuk on Nov 2, 2016, 6:13 PM
     
  26. Small scale leaves........ View Thread - Dan Rosecrans on Oct 31, 2016, 10:36 AM
    1. Brand? Supplier? - James Morgan on Oct 31, 2016, 11:57 AM
      1. Re: Brand? Supplier? - Mike Dougherty on Oct 31, 2016, 12:37 PM
        1. Thanks Mike - James Morgan on Oct 31, 2016, 1:21 PM
    2. Scale gardening - Ilian Filipov on Oct 31, 2016, 1:45 PM
      1. Convincing, Ilian! Noch for live on tree and snippets of real fall leaves it is.... - peter van kempen on Oct 31, 2016, 6:14 PM
     
  27. Wz-29 View Thread - George Buzby on Oct 31, 2016, 10:33 AM
    1. very nice build. I like the used look and personalisation. - peter van kempen on Oct 31, 2016, 1:00 PM
     
  28. Modelstories - November 2016 View Thread - Lorenzo Tonioli on Oct 31, 2016, 3:42 AM
  29.  
  30. WEEKLY UPDATE - 30.10.2016 View Thread - Paul Giles on Oct 30, 2016, 5:57 PM
    1. Magirus & Merc - Neil Lyall on Oct 30, 2016, 6:25 PM
      1. Re: Magirus & Merc - Dan Taylor on Oct 31, 2016, 1:39 AM
      2. cracking work - paul bishop on Oct 31, 2016, 2:16 AM
      3. I have Opel Blitz (ESCI) - ambulance on my table - Robert (PL) on Oct 31, 2016, 10:27 AM
      4. Re: Magirus & Merc - Fred A. Berganio on Oct 31, 2016, 1:23 PM
      5. Good progress... - Paul Giles on Nov 1, 2016, 6:14 AM
    2. IDF M60 AVLB (Magach Tagash Tsemed) - Tim Neate on Oct 30, 2016, 7:08 PM
      1. IDF M-60 - Joel on Oct 30, 2016, 8:02 PM
        1. Yes it will be a kit - Tim Neate on Oct 31, 2016, 6:11 PM
          1. It's a kit !! - Joel on Nov 2, 2016, 9:04 PM
      2. Re: IDF M60 AVLB (Magach Tagash Tsemed) - Stefan Zadziuk on Oct 30, 2016, 8:43 PM
        1. Lead fishing weight - Tim Neate on Oct 31, 2016, 6:18 PM
      3. Re: IDF M60 AVLB (Magach Tagash Tsemed) - Dan Taylor on Oct 31, 2016, 1:44 AM
        1. Lead weight - Tim Neate on Oct 31, 2016, 6:40 PM
      4. very impressive - paul bishop on Oct 31, 2016, 2:17 AM
        1. Can be hard work - Tim Neate on Oct 31, 2016, 6:30 PM
      5. Neat exclusive model, Tim :-) - peter van kempen on Oct 31, 2016, 6:10 AM
        1. Thanks Peter. - Tim Neate on Oct 31, 2016, 6:31 PM
      6. dang what a contraption - john lewis on Oct 31, 2016, 11:36 AM
        1. Scratch built - Tim Neate on Oct 31, 2016, 6:33 PM
      7. Re: IDF M60 AVLB (Magach Tagash Tsemed) - Fred A. Berganio on Oct 31, 2016, 1:25 PM
        1. Absolutely right - Tim Neate on Oct 31, 2016, 6:34 PM
      8. Very nice. Think about Resin kit of it n/t - Robert Kru on Oct 31, 2016, 4:16 PM
        1. Resin and white metal - Tim Neate on Oct 31, 2016, 6:36 PM
      9. Superb scratch-building... - Paul Giles on Nov 1, 2016, 6:18 AM
      10. Re: IDF M60 AVLB (Magach Tagash Tsemed) - Patrick Mondria on Nov 3, 2016, 1:31 PM
    3. another busy week - paul bishop on Oct 31, 2016, 2:15 AM
      1. lots done - john lewis on Oct 31, 2016, 11:35 AM
        1. yes its UParmoured - paul bishop on Oct 31, 2016, 3:47 PM
      2. another eclectic collection... - Fred A. Berganio on Oct 31, 2016, 1:30 PM
        1. thanks - paul bishop on Oct 31, 2016, 3:53 PM
      3. Re: another busy week - Dan Taylor on Oct 31, 2016, 2:01 PM
        1. cheers Dan - paul bishop on Oct 31, 2016, 4:03 PM
      4. Very interesting choices, well done n/t - Robert Kru on Oct 31, 2016, 4:19 PM
        1. Cheers Robert n/t - paul bishop on Oct 31, 2016, 5:35 PM
      5. Nice eclectic mix of subjects... - Paul Giles on Nov 1, 2016, 6:24 AM
        1. thanks Paul - paul bishop on Nov 1, 2016, 4:55 PM
    4. Strassenkampfwagen IV "Feger B" - Robert Kru on Oct 31, 2016, 3:23 AM
      1. Re: Strassenkampfwagen IV "Feger B" - Carl Mueck on Oct 31, 2016, 4:07 AM
      2. Good you didnt work in the Waffenamt, you are talented! - peter van kempen on Oct 31, 2016, 6:13 AM
      3. i like it - john lewis on Oct 31, 2016, 11:26 AM
      4. Tracked Beast '46 - Fred A. Berganio on Oct 31, 2016, 1:35 PM
      5. Re: Strassenkampfwagen IV "Feger B" - Dan Taylor on Oct 31, 2016, 1:58 PM
      6. neat idea - paul bishop on Oct 31, 2016, 3:46 PM
      7. Neat idea... - Paul Giles on Nov 1, 2016, 6:36 AM
      8. Spares box monster - Piotr Pyrczak on Nov 1, 2016, 9:46 AM
      9. Thanks for kind words, upgrade soon - Robert Kru on Nov 2, 2016, 3:23 PM
      10. great idea - Patrick Mondria on Nov 3, 2016, 1:36 PM
    5. Upgraded Pz III E/F in progress (part 2) - Piotr Pyrczak on Oct 31, 2016, 4:26 AM
      1. Nice built - Robert Kru on Oct 31, 2016, 9:53 AM
        1. Hi Robert - Piotr Pyrczak on Oct 31, 2016, 12:07 PM
      2. good detail - john lewis on Oct 31, 2016, 11:29 AM
        1. Thanks John - Piotr Pyrczak on Oct 31, 2016, 11:58 AM
      3. Re: Upgraded Pz III E/F in progress (part 2) - Fred A. Berganio on Oct 31, 2016, 1:53 PM
        1. Hi Fred - Piotr Pyrczak on Nov 1, 2016, 8:31 AM
      4. Re: Upgraded Pz III E/F in progress (part 2) - Dan Taylor on Oct 31, 2016, 1:55 PM
        1. Hi Dan - Piotr Pyrczak on Nov 1, 2016, 8:36 AM
      5. Very nice indeed... - Paul Giles on Nov 1, 2016, 6:47 AM
        1. Hi Paul - Piotr Pyrczak on Nov 1, 2016, 8:40 AM
          1. That's the one... - Paul Giles on Nov 1, 2016, 12:52 PM
      6. Nice! - Roger Cook on Nov 1, 2016, 4:33 PM
        1. Hi Roger - Piotr Pyrczak on Nov 2, 2016, 6:01 AM
    6. Herd update once more... - Radek Rzeszotarski on Oct 31, 2016, 2:04 PM
      1. Nice and interesting collection - Robert Kru on Oct 31, 2016, 2:18 PM
        1. Re: Nice and interesting collection - Radek Rzeszotarski on Oct 31, 2016, 3:01 PM
      2. Some Beauties... - Fred A. Berganio on Oct 31, 2016, 2:46 PM
      3. top class - paul bishop on Oct 31, 2016, 4:07 PM
      4. beautiful - john lewis on Nov 1, 2016, 2:58 AM
      5. Very nice work... - Paul Giles on Nov 1, 2016, 6:51 AM
      6. Cool stuff - Piotr Pyrczak on Nov 1, 2016, 8:42 AM
      7. Re: Herd update once more... - Radek Rzeszotarski on Nov 1, 2016, 1:07 PM
    7. Lion of Babylon - Matt Reeves on Nov 1, 2016, 12:24 AM
      1. Lovely weathering - paul bishop on Nov 1, 2016, 2:18 AM
        1. Haha, thanks Paul - NT - Matt Reeves on Nov 1, 2016, 1:12 PM
      2. Shaping up nicely... - Paul Giles on Nov 1, 2016, 6:54 AM
        1. Drybrushing.. - Matt Reeves on Nov 1, 2016, 1:14 PM
      3. Detail Washing - Fred A. Berganio on Nov 1, 2016, 11:27 AM
        1. Thanks Fred, very kind words - NT - Matt Reeves on Nov 1, 2016, 1:12 PM
     
  31. And the accompaniment... View Thread - Dave Haine on Oct 30, 2016, 5:16 PM
    1. Nice. - Dave Rhodes on Oct 30, 2016, 7:19 PM
      1. Re: Nice. - Dave Haine on Oct 31, 2016, 3:13 AM
    2. Re: And the accompaniment... - Stefan Zadziuk on Oct 30, 2016, 8:37 PM
    3. Re: And the accompaniment... - Dan Taylor on Oct 31, 2016, 1:49 AM
      1. Re: And the accompaniment... - Dave Haine on Oct 31, 2016, 3:10 AM
    4. An oldy but a goody! - David Clark on Oct 31, 2016, 3:03 AM
    5. One of the reasons why I hang on to piles of airfix kits... - peter van kempen on Oct 31, 2016, 6:17 AM
    6. The accompaniment - Richard Allebone on Oct 31, 2016, 3:50 PM
      1. super - Les Freathy on Oct 31, 2016, 4:05 PM
        1. Re: super - Dave Haine on Oct 31, 2016, 4:13 PM
    7. Well Done!! - Neil Craig on Oct 31, 2016, 4:56 PM
     
  32. greenstuffworld.com's leaf punch? View Thread - Jeff Hamblen on Oct 30, 2016, 3:37 PM
    1. Very interesting... - Paul Giles on Oct 30, 2016, 6:04 PM
    2. Punch leaves - David Pérez del Palomar on Oct 31, 2016, 7:22 AM
    3. Re: greenstuffworld.com's leaf punch? - Petr Vanek on Oct 31, 2016, 10:44 AM
      1. I agree Petr, if you go punch the form you need scale thickness. - peter van kempen on Oct 31, 2016, 1:09 PM
      2. Re: greenstuffworld.com's leaf punch? - Anonymous on Oct 31, 2016, 2:05 PM
        1. Re: greenstuffworld.com's leaf punch? - Petr Vanek on Nov 1, 2016, 4:54 AM
    4. Interesting variety of stuff - Rob Pye on Oct 31, 2016, 11:54 AM
    5. Green Stuff leaves punch are.. - Pascal Leroux on Oct 31, 2016, 2:36 PM
    6. Thanks for the help - Jeff Hamblen on Oct 31, 2016, 5:10 PM
     
  33. Neil Craig you are a star. View Thread - PatBeirter on Oct 30, 2016, 10:43 AM
    1. Thanks, Pat. - Neil Craig on Oct 30, 2016, 11:08 AM
      1. Re: Thanks, Pat. - Grant Parkin on Oct 30, 2016, 2:21 PM
     
  34. 1/76 Milicast Bedford O by Dave Rhodes View Thread - Neil Craig on Oct 30, 2016, 9:41 AM
    1. great lorry - paul bishop on Oct 30, 2016, 12:30 PM
      1. War Memorial. - Dave Rhodes on Oct 30, 2016, 1:45 PM
        1. look very effective n/t - paul bishop on Oct 30, 2016, 5:02 PM
    2. your lorry - john lewis on Oct 30, 2016, 1:47 PM
    3. Bedford O - Chris Grove on Oct 30, 2016, 5:46 PM
      1. Life. - Dave Rhodes on Oct 30, 2016, 7:15 PM
    4. Yet another cracker - Stefan Zadziuk on Oct 30, 2016, 8:23 PM
      1. Bandage. - Dave Rhodes on Oct 31, 2016, 5:12 AM
    5. Beautiful Bedford - Dan Taylor on Oct 31, 2016, 1:55 AM
      1. Photo. - Dave Rhodes on Oct 31, 2016, 5:16 AM
    6. Interesting subject - David Clark on Oct 31, 2016, 2:48 AM
      1. More! - Dave Rhodes on Oct 31, 2016, 5:20 AM
    7. Bedford O - Richard Allebone on Oct 31, 2016, 3:54 PM
      1. very nice - Les Freathy on Oct 31, 2016, 4:10 PM
        1. Trucks. - Dave Rhodes on Oct 31, 2016, 6:48 PM
    8. BEF truck colours - ted angus on Nov 1, 2016, 9:32 AM
      1. Colours. - Dave Rhodes on Nov 1, 2016, 2:17 PM
        1. colours - ted angus on Nov 1, 2016, 3:23 PM
     
  35. Snogo View Thread - Dave Haine on Oct 30, 2016, 7:57 AM
    1. Super - Les Freathy on Oct 30, 2016, 8:03 AM
      1. Re: Super - Dave Haine on Oct 30, 2016, 9:09 AM
    2. beautiful - Dave Rhodes on Oct 30, 2016, 8:31 AM
    3. Snogo - Richard Allebone on Oct 30, 2016, 9:08 AM
    4. Excellent Model! - Neil Craig on Oct 30, 2016, 9:33 AM
    5. Very good model, but... - Ilian Filipov on Oct 30, 2016, 9:54 AM
      1. Re: Very good model, but... - Dave Haine on Oct 30, 2016, 3:36 PM
    6. really impressive - paul bishop on Oct 30, 2016, 12:31 PM
    7. good job - john lewis on Oct 30, 2016, 1:51 PM
    8. And again - Very good model, but... - Eduard Sorokin on Oct 30, 2016, 2:20 PM
      1. Re: And again - Very good model, but... - Dave Haine on Oct 30, 2016, 3:28 PM
        1. types of snow - ted angus on Oct 30, 2016, 5:04 PM
    9. Lovely model... - Stefan Zadziuk on Oct 30, 2016, 8:17 PM
    10. Snow is Excellent - Tim Marshall on Oct 31, 2016, 12:17 AM
    11. That makes me feel cold! - David Clark on Oct 31, 2016, 3:01 AM
      1. Re: That makes me feel cold! - Dave Haine on Oct 31, 2016, 5:33 AM
     
  36. Trumpeter Komintern revisited View Thread - Ilian Filipov on Oct 30, 2016, 5:56 AM
    1. Thanks Ilian - Piotr Pyrczak on Oct 30, 2016, 6:28 AM
      1. The variant options, as I see them - Ilian Filipov on Oct 30, 2016, 9:38 AM
    2. Re: Trumpeter Komintern revisited - Neil Lyall on Oct 30, 2016, 6:56 AM
    3. Suitable for Spain? - PatBeirter on Oct 30, 2016, 10:50 AM
      1. Spanish tractors - Ilian Filipov on Oct 30, 2016, 11:26 AM
        1. Suitable...I think - FJCabeza on Oct 30, 2016, 8:06 PM
          1. Spanish "Komintern" - Eduard Sorokin on Nov 1, 2016, 12:25 PM
      2. Thank you for your replies - PatBeirter on Nov 2, 2016, 3:38 PM
     
  37. 1/76 Scratchbuilt Albion KL127 Mobile X-Ray Van by Richard Allebone View Thread - Neil Craig on Oct 29, 2016, 5:11 AM
    1. Richard, your UK softskins are inspirational! - peter van kempen on Oct 29, 2016, 6:08 AM
    2. Inspirational. - Dave Rhodes on Oct 29, 2016, 9:39 AM
    3. Great Stuff - Fred A. Berganio on Oct 29, 2016, 11:57 AM
    4. fantastic - paul bishop on Oct 29, 2016, 12:51 PM
    5. X Ray lorry - radiation hazard? - Will Ward on Oct 29, 2016, 2:08 PM
      1. X-RAY - Richard Allebone on Oct 29, 2016, 6:37 PM
      2. Hazard - F. Giovagnorio on Oct 30, 2016, 5:44 AM
    6. Aspirational! - David Clark on Oct 29, 2016, 11:03 PM
    7. Very instructive - Dan Taylor on Oct 30, 2016, 3:27 AM
      1. Figures - Richard Allebone on Oct 30, 2016, 9:14 AM
    8. Another little gem - Stefan Zadziuk on Oct 30, 2016, 8:00 PM
      1. sanitary! - Dave Rhodes on Nov 1, 2016, 2:25 PM
     
  38. COMPETITION 2016-17 - NEW OWNERS - Week 5 of 28... View Thread - Paul Giles on Oct 28, 2016, 4:17 PM
    1. HD bike WIP - Marc Mercier on Oct 29, 2016, 2:27 AM
      1. Simply superb... - Paul Giles on Oct 29, 2016, 4:36 AM
        1. Support - Marc Mercier on Oct 29, 2016, 5:37 AM
      2. Re: HD bike WIP - Fred A. Berganio on Oct 29, 2016, 11:59 AM
      3. Re: HD bike WIP - Dimitrios Moschidis on Oct 29, 2016, 3:30 PM
      4. you doing Easy rider with extended front forks? - Mike Durand on Oct 29, 2016, 10:21 PM
        1. Brass - Marc Mercier on Oct 30, 2016, 5:31 AM
     
  39. Photobucket problems... View Thread - Paul Giles on Oct 28, 2016, 1:02 PM
    1. Seems to be back up again now....N/T - Paul Giles on Oct 28, 2016, 1:50 PM
    2. Re: Photobucket problems... - Dave Haine on Oct 28, 2016, 5:11 PM
     
  40. Postimage View Thread - James Morgan on Oct 28, 2016, 11:47 AM
    1. Postimage: "Failure is not an option!" - David Clark on Oct 28, 2016, 8:35 PM
    2. Business as usual - David Clark on Nov 3, 2016, 7:56 AM
     
  41. Bada news from Mig View Thread - Angelo Danielis on Oct 28, 2016, 8:40 AM
    1. That is bad news... - Paul Giles on Oct 28, 2016, 8:46 AM
    2. Re: Bada news from Mig - Radek Rzeszotarski on Oct 28, 2016, 9:17 AM
      1. I really hope you´re all wrong - FJCabeza on Oct 28, 2016, 10:32 AM
        1. Inoperable vs Unoperable - David Nickels on Oct 28, 2016, 3:03 PM
          1. Inoperable - FJCabeza on Oct 28, 2016, 4:08 PM
            1. Re: Inoperable - Mike Dougherty on Oct 29, 2016, 4:06 AM
              1. I am aware of this, I am a nurse and I´ve worked for 25 years in a Oncohematology Ward - FJCabeza on Oct 29, 2016, 7:59 AM
    3. Please pass on my thoughts - paul bishop on Oct 28, 2016, 1:32 PM
    4. Very sad news - Tim Neate on Oct 29, 2016, 4:52 AM
     
  42. Painting of my herd... View Thread - Radek Rzeszotarski on Oct 28, 2016, 8:09 AM
    1. I noticed that too... - Paul Giles on Oct 28, 2016, 8:13 AM
      1. Postimage - David Clark on Oct 28, 2016, 9:31 AM
     
  43. who can help me with info about manufacturer sModel !! View Thread - Henk Timmerman / HenkofHolland on Oct 28, 2016, 7:14 AM
    1. Dont want to add undue concern... - Dave Hughes on Oct 28, 2016, 7:56 AM
      1. collaboration between sModel with Ceasar Figurs / Miniknight - Henk Timmerman / HenkofHolland on Oct 28, 2016, 8:37 AM
      2. You are right, Dave. Saw the puppchen and nebelwerfer with ceasar men as well..... - peter van kempen on Oct 28, 2016, 10:41 AM
    2. Will ask Moxing Studio for info - Andrew Lang on Oct 28, 2016, 11:18 AM
      1. Andy, that's a great idea. We look forward!! n/t - Henk Timmerman / HenkofHolland on Oct 28, 2016, 11:26 AM
     
  44. Message for Bob Walls re: 72 Brigade products... View Thread - Paul Giles on Oct 27, 2016, 7:58 PM
    1. Why is this individual still being named... - Rob Pye on Oct 28, 2016, 5:39 AM
      1. Do you read messages before you comment them? - Robert Kru on Oct 28, 2016, 5:56 AM
      2. What is your problem... - Paul Giles on Oct 28, 2016, 6:18 AM
        1. This may or may not be appropriate . . . - David Clark on Oct 28, 2016, 6:44 AM
        2. Apology...your kidding, right... - Rob Pye on Oct 28, 2016, 9:34 AM
          1. Buyer's remorse??? - Paul Giles on Oct 28, 2016, 12:31 PM
      3. please stop with this behavior - Henk Timmerman / HenkofHolland on Oct 28, 2016, 7:01 AM
        1. Seconded n/t - paul bishop on Oct 28, 2016, 1:38 PM
    2. If he changed his name to voldermort - Simon barnes on Oct 28, 2016, 11:39 AM
      1. Good idea... - Paul Giles on Oct 28, 2016, 12:35 PM
    3. Thanks Paul! - Fred A. Berganio on Oct 28, 2016, 12:05 PM
    4. Re: Message for Bob Walls re: 72 Brigade products... - Neil Lyall on Oct 28, 2016, 5:15 PM
     
  45. Puzzling Address scramble View Thread - Rob on Oct 27, 2016, 3:50 PM
    1. Different countries of origin, different sequence - Kent McKesson on Oct 27, 2016, 10:06 PM
    2. I noticed this - Andrew Lang on Oct 28, 2016, 12:03 AM
    3. no problems with OKB - Mark Knight on Oct 28, 2016, 3:45 AM
    4. Thank you for the responses - Rob on Oct 28, 2016, 9:19 AM
    5. Got my package today. - Jeff Hamblen on Oct 28, 2016, 10:45 AM
      1. ...and me too - Stefan Zadziuk on Oct 28, 2016, 5:29 PM
    6. Encouraging news - Rob on Oct 28, 2016, 6:57 PM
     
  46. What happened to Dan Taylor's Allied tool set? Not on the site anymore? View Thread - Harry Dente on Oct 27, 2016, 11:16 AM
    1. Tools - Dan Taylor on Oct 27, 2016, 1:11 PM
      1. White metal would be great - paul bishop on Oct 27, 2016, 1:36 PM
      2. Thanks Dan! I will admit to snapping a shovel handle too! - Harry Dente on Oct 27, 2016, 5:42 PM
      3. Now that's good news Dan... - Stefan Zadziuk on Oct 28, 2016, 5:37 PM
     
  47. Australian army in Egypt, El Alamein area - 1942 documentary View Thread - Ilian Filipov on Oct 26, 2016, 6:19 PM
    1. Really Great Stuff - Neil Craig on Oct 26, 2016, 7:20 PM
    2. Re: Australian army in Egypt, El Alamein area - 1942 documentary - Tim Marshall on Oct 27, 2016, 1:15 AM
      1. film - Les Freathy on Oct 27, 2016, 4:43 AM
        1. Slow - Neil Craig on Oct 27, 2016, 5:10 AM
        2. Connection problems? - Ilian Filipov on Oct 27, 2016, 5:58 AM
          1. film - Les Freathy on Oct 27, 2016, 1:14 PM
            1. Download - Ilian Filipov on Oct 27, 2016, 1:44 PM
              1. download - Les Freathy on Oct 28, 2016, 6:06 AM
    3. A productive 14+ minutes ... - Paul Giles on Oct 27, 2016, 3:05 PM
      1. You're always welcome - Ilian Filipov on Oct 27, 2016, 3:52 PM
      2. Dan will be happy - Will Ward on Oct 28, 2016, 10:42 AM
        1. Already ahead of you... - Paul Giles on Oct 28, 2016, 1:49 PM
          1. Make sure they are fired - Will Ward on Oct 29, 2016, 2:14 PM
            1. It's a tough life... - Paul Giles on Oct 29, 2016, 5:41 PM
    4. movies - Bas Slaats on Oct 27, 2016, 4:39 PM
    5. Many thanks, excellent stuff - Al Bowie on Oct 27, 2016, 8:12 PM
    6. General Morshead? - Chris Camfield on Oct 27, 2016, 10:41 PM
      1. Yes - Ilian Filipov on Oct 28, 2016, 1:03 AM
        1. That'll teach me to read more carefully! - Chris Camfield on Oct 28, 2016, 7:22 AM
          1. Re: That'll teach me to read more carefully! - Dave Haine on Oct 30, 2016, 7:21 AM
            1. What I meant... - Chris Camfield on Oct 30, 2016, 5:25 PM
              1. Re: What I meant... - Dave Haine on Oct 31, 2016, 5:52 AM
                1. Thanks for the recommendation! - Chris Camfield on Oct 31, 2016, 10:26 AM
      2. Morshead had an impressive CV - Shane Weier on Oct 29, 2016, 4:29 AM
     
  48. Looking for 1/72 or 1/76 Russian women soldiers View Thread - Harry Dente on Oct 26, 2016, 2:39 PM
    1. Re: Looking for 1/72 or 1/76 Russian women soldiers - James Pratt on Oct 26, 2016, 4:33 PM
    2. Zvezda have one in the medics set - peter van kempen on Oct 26, 2016, 4:49 PM
    3. Thanks Gents! - Harry Dente on Oct 26, 2016, 4:53 PM
    4. RE: Russian women soldiers - Tomas Jakl on Oct 26, 2016, 5:03 PM
    5. Wee Friends - David Clark on Oct 26, 2016, 9:48 PM
    6. Reedoak - Rob Haelterman on Oct 27, 2016, 8:49 AM
    7. Another Russian Woman Soldier - Chuck Robertson on Oct 28, 2016, 12:07 AM
    8. Re: Looking for 1/72 or 1/76 Russian women soldiers - Geoff Baines on Oct 28, 2016, 2:39 PM
     
  49. Trumpeter Komintern View Thread - Ilian Filipov on Oct 26, 2016, 8:39 AM
    1. Re: Trumpeter Komintern - FJCabeza on Oct 27, 2016, 9:44 AM
      1. Probably AKAN - Ilian Filipov on Oct 27, 2016, 10:06 AM
        1. i can´t see is it something like this Ssh36? - FJCabeza on Oct 28, 2016, 10:46 AM
      2. Images? - Mario Wens on Nov 2, 2016, 10:14 AM
    2. HobbyBoss has one coming out as well - Tony Ivey on Oct 29, 2016, 12:53 PM
     
  50. BRAILLE SCALE GROUP BUILD 2016.4 - 75+ Week 7 of 15 View Thread - Paul Giles on Oct 26, 2016, 5:54 AM
    1. Hobbyboss Karl Part 3 - Joseph Rocamora on Oct 26, 2016, 1:53 PM
      1. karl - john lewis on Oct 26, 2016, 10:30 PM
      2. cracking job - paul bishop on Oct 27, 2016, 2:20 AM
      3. Karl progress - Bas Slaats on Oct 27, 2016, 4:54 AM
      4. Excellent work... - Paul Giles on Oct 28, 2016, 5:20 AM
    2. churchill gun carrier - john lewis on Oct 26, 2016, 10:39 PM
      1. Shame about the barrel... - Paul Giles on Oct 28, 2016, 5:25 AM
    3. OKB Grigorov M109 part 4 - Will Alcott on Oct 26, 2016, 11:58 PM
      1. Looking good! - Tim Neate on Oct 27, 2016, 2:26 AM
      2. M109/ rivets on sidewall - Robert Kru on Oct 27, 2016, 5:51 AM
        1. Hi Robert... - Will Alcott on Oct 27, 2016, 4:35 PM
          1. Blackdog - Robert Kru on Oct 28, 2016, 6:30 AM
            1. Interesting - Will Alcott on Oct 28, 2016, 9:58 AM
      3. Fine work... - Paul Giles on Oct 28, 2016, 5:29 AM
    4. ACE Centurion Mk 5/1 part 2 - Will Alcott on Oct 27, 2016, 12:19 AM
      1. looking good - paul bishop on Oct 27, 2016, 2:33 AM
        1. Hi Paul... - Will Alcott on Oct 27, 2016, 4:15 PM
      2. Coming together very well; I have a question about the... - Graham Mansell on Oct 27, 2016, 8:04 AM
        1. parts B10/G11 - Will Alcott on Oct 27, 2016, 8:50 AM
          1. Roger that, just at the bench and I cut G11... - Graham Mansell on Oct 27, 2016, 9:20 AM
          2. Re: parts B10/G11 - Alexey Blaschuk on Oct 28, 2016, 7:14 PM
      3. Re: ACE Centurion Mk 5/1 part 2 - David Clark on Oct 27, 2016, 9:50 AM
        1. Hi David... - Will Alcott on Oct 27, 2016, 4:13 PM
          1. Mud scrapers - David Clark on Oct 28, 2016, 5:42 AM
      4. Fine looking vehicle... - Paul Giles on Oct 28, 2016, 5:35 AM
    5. Revell T-72M1 - Matt Reeves on Oct 27, 2016, 1:01 AM
      1. Nice job, I like the way the... - Graham Mansell on Oct 27, 2016, 9:23 AM
        1. Thanks Graham! And more work.. - Matt Reeves on Oct 27, 2016, 7:06 PM
          1. I'll just be danged.. - Matt Reeves on Oct 27, 2016, 7:08 PM
      2. Very nice... - Paul Giles on Oct 28, 2016, 5:41 AM
    6. 5.5" Howitzer built, 4.5" Howitzer commenced... - Paul Giles on Oct 28, 2016, 1:42 PM
     
  51. Custom Markings - Iraqi T-72M1 View Thread - Matt Reeves on Oct 26, 2016, 2:49 AM
    1. According to "Zaloga's book" - JMehner on Oct 26, 2016, 6:07 AM
      1. Trolling much? - Matt Reeves on Oct 26, 2016, 2:47 PM
        1. "Zaloga's book"... - JMehner on Oct 26, 2016, 4:54 PM
          1. Once again.. - Matt Reeves on Oct 27, 2016, 12:52 AM
            1. Well... - JMehner on Oct 27, 2016, 3:42 AM
              1. Jens.. - Matt Reeves on Oct 27, 2016, 11:22 AM
      2. No more, this has gone far enough... - Paul Giles on Oct 27, 2016, 6:06 AM
        1. Yes, Paul, I apologize for getting so off-topic - NT - Matt Reeves on Oct 27, 2016, 11:20 AM
    2. thats some neat stencil work! - paul bishop on Oct 26, 2016, 1:50 PM
      1. Thanks for the kind words.. and I KNOW that being Muslim doesn't entail Arab ancestry - NT - Matt Reeves on Oct 26, 2016, 2:50 PM
    3. I agree! - Joseph Rocamora on Oct 26, 2016, 2:11 PM
      1. Stencil - that was the word I was looking for, haha! Thanks bud - NT - Matt Reeves on Oct 26, 2016, 3:47 PM
    4. Good trick to be sure of good characters without risk when applied direct. - peter van kempen on Oct 26, 2016, 2:44 PM
      1. Yes, much better than freehanding it.. - Matt Reeves on Oct 26, 2016, 3:49 PM
        1. Yeah, and quality standards are high....but it provides me news all the time. - peter van kempen on Oct 26, 2016, 4:53 PM
     
  52. TRADING POST - 25.10.2016 View Thread - Paul Giles on Oct 25, 2016, 4:36 AM
    1. SWAP: S-Models DAK Pz.Kpfw 1B for European equivalent - Andrew Lang on Oct 25, 2016, 12:23 PM
      1. Swap - Europian swap - Henk Timmerman / HenkofHolland on Oct 25, 2016, 12:48 PM
        1. I'm interested in the tropical deck, Henk do you need it? - peter van kempen on Oct 25, 2016, 5:32 PM
          1. Peter - I can help you as well - Andrew Lang on Oct 25, 2016, 6:51 PM
            1. Wow thanks Andy, E-mail incoming! - peter van kempen on Oct 26, 2016, 10:42 AM
    2. Some kits and parts for swap or sale. - al magnus on Oct 25, 2016, 5:34 PM
      1. my FtF bofors for the S Munischlepper w ammo trailer? - peter van kempen on Oct 26, 2016, 10:36 AM
    3. SWAP Preiser against selected stuff - Robert Kru on Oct 26, 2016, 6:22 AM
     
 << Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50   Next >> 

Visitors in this forum in the last 10 minutes: 15 Visitors
stefzadziuk, 14 guests


Terms and Conditions of Use
Report abuse