Home > Discussion Groups > Braille Scale

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement
  << Previous Topic | Next Topic >>Return to Index  

Dingo Wip

September 11 2017 at 3:50 PM
Bas Slaats  (Login Bas_Slaats)
Missing-Lynx members
from IP address 85.148.147.92

A friend of my reminded me at the KMK show that I didn't show my work here anymore. So in that case I am glad to set that right. Current at my work desk is the Revell Dingo with some small modifications and the wheels from T&T. The Revell wheels are really not worth the plastic. I masked the windows, and next will be the primer coat.

dingo4

dingo3

dingo2

dingo1

thanks for watching. And I promise to show my next update faster. wink.gif
"Perfect is the enemy of done"

 
 Respond to this message   
AuthorReply
Paul Giles
(Login Spacewolfdad)
MODERATORS ONLY - Braille
176.250.120.101

Nice work...

September 11 2017, 7:43 PM 

Hello Bas,

Nice little vehicle, the wheels do look very good and were a good upgrade. What do you use to mask the windows? I shall look forward to the next update and seeing the vehicle with some paint on. You definitely need to post more often wink.gif.

All the best,

Paul

 
 Respond to this message   
Pieter Beneke
(Login PieterBK)
Missing-Lynx members
86.83.157.228

Great little Dingo

September 12 2017, 1:25 PM 

Well done Bas happy.gif

Cheers!
Groet,
Pieter

 
 Respond to this message   
Graham Mansell
(Login GMansell)
Missing-Lynx members
108.161.124.235

That looks very good, is the entry step an etch set or...

September 12 2017, 2:46 PM 

...something else?

 
 Respond to this message   
Bas Slaats
(Login Bas_Slaats)
Missing-Lynx members
85.148.147.92

etch

September 13 2017, 2:52 PM 

yes, this a left over from another Etch set. I checked the ones dedicated for this kit, but most parts are from the inside and you see almost nothing from it. So I did made some my own.

Best regards, Bas
"Perfect is the enemy of done"

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse