Home > Discussion Groups > General

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Re: Badger AB recommendations...

November 4 2009 at 3:47 PM
  (Login mgard)
Missing-Lynx members
from IP address 144.160.98.31


Response to Badger AB recommendations...

I don't know anything about the 155 so I will defer to the previous post on that.

The 250 is a very basic sprayer, I really wouldn't recommend it for modelling.
The 350 is a good single action external mix AB that will give good overall coverage and handle thicker paints.
The 200 is a good single action internal mix AB and better than the 350, but mostly good for overall coverage. It comes with 3 needle/head assemblies.
The 150 is a good double action internal mix AB and like the 200 comes with 3 different needle/head assemblies. With the fine needle/head you can get fine lines which are useful for your camo schemes.

I've only seen the 175 but have no experience with it. It appears to be similar in design to the Paasche VL which would make it a double action internal mix AB like the 150.

Hope this helps.

Mike

 
 Respond to this message   


Terms and Conditions of Use
Report abuse