Home > Discussion Groups > General

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.


 Return to Index  

Thin your paint more, and turn the PSI down...

June 18 2012 at 10:07 PM
Scott Gentry  (Login didiumus)
Missing-Lynx members
from IP address

Response to I have a question about airbrushing............

You should be able to shoot properly thinned paint down to 5 psi if needed in that brush. I would probably suggest 10 - 12 psi max.

Also check you shooting angles, and the amount of paint you are applying. (How far back the trigger is) It definitely takes practice...

I would suggest getting some 3 X 5 index cards, and practicing on them over and over until you get the mix/psi/amount the way you want it...


Scott Gentry

 Respond to this message   

Terms and Conditions of Use
Report abuse