Message posting guidelines:
Full real names must be used at all times.
A valid e-mail address must be provided. (This is not
Images must be posted at low resolution (72 dpi) and no
larger than 760 pixels wide, and copyright/trade mark
owners must be credited whenever reasonably possible.
Registration is compulsory
if you wish to post messages on the Discussion Groups.
For further information, please see the following
Please read our
By contributing to this discussion group, you indicate your
agreement to the
Terms and Conditions of Use .
Posts that violate the guidelines or Terms and conditions of
Use of the Missing-lynx.com discussion groups will be
erased, and repeated violation of this policy may result in
termination of the violator's account.
how many of you guys prime your plastic July 12 2012 at 9:45 PM
(Login golance) Missing-Lynx members from IP address 188.8.131.52
before you airbrush? and, if so, what do you like to use?
I'm working a mixed media conversion kit-plastic/lots of PE and Al parts and want to know if priming will help with paint adhesion, specifically on the PE and the Al parts.
Priming? - Greg H on Jul 12, 10:12 PM
Tamiya rattlecan white or gray primmer. Sometimes I use Gunze - Mike Witous on Jul 12, 10:17 PM
Re: how many of you guys prime your plastic - Chris Meddings on Jul 12, 11:31 PM
Prime everthing - Scott Millican on Jul 13, 12:30 AM
Vallejo primers - Bruton,Dave on Jul 13, 10:11 AM
Yes! - Scott Millican on Jul 13, 11:39 AM
Thanks! - Bruton,Dave on Jul 13, 8:05 PM
Sometimes I use just plain..... - Mike Riedeman on Jul 13, 7:09 AM
Primers... - Scott Dimmick on Jul 13, 7:56 AM
It depends on the model - david nickels on Jul 13, 8:00 AM
I prime everything... - Hervé Charbonneau on Jul 13, 9:19 AM
Yes - Scott Taylor on Jul 13, 9:25 AM
Primer.. - Steven C. Johnson on Jul 13, 9:52 AM
Floquil Grimy Black - Michael Kalbfleisch on Jul 13, 11:22 AM
I don't prime unless I have to - David DaSilva on Jul 13, 11:28 AM
Never used to but now, - Dave Coyne on Jul 13, 11:44 AM
Mr. Surfacer 1200 out of the rattle can... - Jeremy Moore on Jul 13, 12:19 PM
Re: Mr. Surfacer 1200 out of the rattle can... - Pat Mooney on Jul 13, 1:19 PM
Why add an extra layer of paint - Christopher Mrosko on Jul 13, 1:40 PM
Re: Why add an extra layer of paint - Pat Mooney on Jul 13, 2:52 PM
An hour or so - Christopher Mrosko on Jul 14, 8:07 AM
Its not an extra layer - Chris Meddings on Jul 13, 10:01 PM
It is an extra layer! - Christopher Mrosko on Jul 14, 8:07 AM
Re: It is an extra layer! - Chris Meddings on Jul 15, 4:43 AM