Home > Discussion Groups > General

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement


General AFV Modelling Discussion Group

Hosted by Al Bowie and Brett Green, the General AFV Modelling discussion group covers any general military modelling topic including industry news and announcements.

Not logged in | Login | Create AccountSearch    Chat!    Home    Post Message
  1. Cure for perfectionism? View Thread - Christian Pålsson on May 14, 2013, 2:56 AM
    1. Blog - Michael McLaughlin on May 14, 2013, 3:13 AM
      1. Re: Blog - Christian Pålsson on May 14, 2013, 11:08 AM
    2. A thought..... - Mike Riedeman on May 14, 2013, 7:29 AM
      1. Thanks Mike n/t - Christian Pålsson on May 14, 2013, 11:09 AM
    3. Just Build For Fun - Chris Johnson on May 14, 2013, 8:17 AM
      1. Thanks Chris n/t - Christian Pålsson on May 14, 2013, 11:09 AM
    4. AMS claims another victim!! - Nicholas Perry on May 14, 2013, 9:52 AM
      1. Re: AMS claims another victim!! - Christian Pålsson on May 14, 2013, 11:01 AM
        1. That way you should make all the errors on one... - Nicholas Perry on May 14, 2013, 9:31 PM
          1. Re: That way you should make all the errors on one... - Christian Pålsson on May 16, 2013, 2:18 PM
          2. I'm not alone! - abilio piñeiro grajera on May 17, 2013, 11:45 AM
    5. Introspection and building for oneself - Fred Schwarz on May 14, 2013, 9:53 AM
      1. Re: Introspection and building for oneself - Christian Pålsson on May 14, 2013, 10:45 AM
        1. You are very welcome (n/t) - Fred Schwarz on May 14, 2013, 12:35 PM
    6. Not only build for yourself, but... - Mike Roof on May 14, 2013, 10:31 AM
      1. Re: Not only build for yourself, but... - Christian Pålsson on May 14, 2013, 10:57 AM
        1. Holdt Dannebrogen högt !!!!! - Mirko Bayerl on May 14, 2013, 12:17 PM
          1. Re: Holdt Dannebrogen högt !!!!! - Christian Pålsson on May 14, 2013, 3:10 PM
    7. Good lessons in this thread - Javier Soler on May 14, 2013, 2:03 PM
      1. Re: Good lessons in this thread - Christian Pålsson on May 14, 2013, 2:35 PM
      2. Completely agree. - abilio piñeiro grajera on May 17, 2013, 11:36 AM
    8. Echo the other comments - and one other... - Scott Gentry on May 14, 2013, 3:46 PM
      1. Re: Echo the other comments - and one other... - Christian Pålsson on May 14, 2013, 3:54 PM
    9. I can only speak for myself - Chris Meddings on May 14, 2013, 5:14 PM
      1. Re: I can only speak for myself - Christian Pålsson on May 15, 2013, 5:09 AM
    10. I'm exactly where you are right now as well... - Robert Carvallo on May 14, 2013, 7:17 PM
      1. Re: I'm exactly where you are right now as well... - Christian Pålsson on May 15, 2013, 4:58 AM
    11. Some good stuff in the thread - Aidrian Bridgeman-Sutton on May 14, 2013, 10:58 PM
      1. Re: Some good stuff in the thread - Christian Pålsson on May 15, 2013, 5:02 AM
        1. OOB can help - Aidrian Bridgeman-Sutton on May 17, 2013, 10:01 PM
     
  2. does anyone have experience in dealing with View Thread - Jim Reese on May 13, 2013, 5:09 PM
    1. Hi Jim, - Chaz Spaulding on May 13, 2013, 6:41 PM
    2. They are very very slow - david nickels on May 13, 2013, 7:37 PM
      1. thank you for the info - Jim reese on May 13, 2013, 8:46 PM
        1. Try here - Mike Peplinski on May 13, 2013, 10:02 PM
     
  3. Boomers Books View Thread - Mike Carroll on May 13, 2013, 4:48 PM
    1. yessir, John at Boomer's is a real professional> - Kevin Ingraham on May 17, 2013, 9:03 PM
    2. Thank you! - john rauscher on May 25, 2013, 3:59 PM
     
  4. Southdowns Model show 2013 pics. View Thread - Andy Argent on May 13, 2013, 8:04 AM
    1. thanks - tony zadro on May 13, 2013, 1:57 PM
     
  5. Hobby Boss M19 Diamond T tank transporter, release date? View Thread - Geoff Steer on May 12, 2013, 2:16 PM
    1. Not soon enough! ...n/t - Roy Stevens on May 12, 2013, 5:54 PM
    2. Sure Hope - Mark Aldrich on May 12, 2013, 7:50 PM
      1. Dunno about the Merkava - Paul Roberts on May 13, 2013, 10:58 AM
     
  6. anybody seen a new MMiR in the last say 5 months?? View Thread - Carter Latham on May 12, 2013, 11:08 AM
    1. June - roy chow on May 12, 2013, 12:55 PM
      1. Poor excuse... - Frank Michaels on May 13, 2013, 7:40 AM
        1. Clarification - roy_chow on May 13, 2013, 9:42 AM
          1. Thanks Roy. - Carter Latham on May 13, 2013, 12:25 PM
            1. Have you called him? - Kurt Laughlin on May 13, 2013, 7:53 PM
              1. Actually, yes - Carter Latham on May 13, 2013, 9:09 PM
              2. Not unreasonable - Al Bowie on May 14, 2013, 6:55 AM
      2. And... - Mike Carroll on May 13, 2013, 4:50 PM
        1. hey me too - Adam Kuller on May 14, 2013, 2:45 AM
    2. MMIR Contact - Al Bowie on May 16, 2013, 6:41 AM
    3. So let me get this right... - Ken Holland on May 16, 2013, 5:57 PM
    4. Re: anybody seen a new MMiR in the last say 5 months?? - John Gauerke on May 16, 2013, 7:20 PM
    5. Re: anybody seen a new MMiR in the last say 5 months?? - John Gauerke on May 16, 2013, 7:21 PM
      1. aaaaannnnnnnddd we still haven't heard anything from - Carter Latham on May 21, 2013, 10:19 PM
     
  7. Question about AK Interactive !!! View Thread - Mirko Bayerl on May 12, 2013, 10:59 AM
    1. like enamel paints - david nickels on May 12, 2013, 7:34 PM
    2. In my experience Mirko... - Dave Coyne on May 12, 2013, 7:50 PM
      1. Many thanks guys :) (n/t) - Mirko Bayerl on May 13, 2013, 11:36 AM
      2. Many thanks guys :) (n/t) - Mirko Bayerl on May 13, 2013, 11:37 AM
     
  8. 2nd Modellers Festival in Cracow (Poland) 1-2 june 2013 View Thread - Jakub Jastrzebski on May 12, 2013, 4:38 AM
  9.  
  10. SAS Aftermarket, which one is better? View Thread - Matt Wellhouser on May 11, 2013, 9:26 PM
    1. Neither - Christopher Mrosko on May 11, 2013, 9:30 PM
      1. Float me a loan - Matt Wellhouser on May 11, 2013, 9:42 PM
        1. well worth it! - Christopher Mrosko on May 11, 2013, 9:45 PM
    2. Legend 2 Vehicle set - Al Bowie on May 12, 2013, 6:43 AM
      1. SAS Jeep - Erik Ahlström on May 12, 2013, 8:52 AM
        1. jeep bronco? - Christopher Mrosko on May 12, 2013, 11:57 AM
          1. Ford or Willys - Erik Ahlström on May 12, 2013, 3:11 PM
      2. Legends Single Set Not So Great - Scott Taylor on May 12, 2013, 3:31 PM
    3. I have the figures - Matt Wellhouser on May 12, 2013, 12:03 PM
     
  11. Aftermarket British Bren Mk I Machine Gun ? View Thread - Joey Dorsey on May 11, 2013, 3:15 PM
    1. Aftermarket Bren - Theo Braat on May 11, 2013, 3:28 PM
    2. Dingo/Bren - Chris Grove on May 11, 2013, 4:24 PM
    3. A few - Al Bowie on May 11, 2013, 7:21 PM
      1. +1 for the Italeri set (n/t) - John Tapsell on May 12, 2013, 5:30 AM
        1. Italeri - Erik Ahlström on May 12, 2013, 10:56 AM
          1. Thanks For the Comments & Info Guys !!! - Joey Dorsey on May 12, 2013, 1:15 PM
          2. Yep - Al Bowie on May 12, 2013, 11:33 PM
     
  12. Weekend fun poll--what are you RESISTING buying? View Thread - Tom Hall on May 11, 2013, 12:26 PM
    1. I wanted one - Owen R Auer on May 11, 2013, 12:37 PM
    2. Not so much resisting... - Paul Roberts on May 11, 2013, 1:04 PM
    3. Meng merkava - Aaron Smischney on May 11, 2013, 2:12 PM
    4. Like Paul - Theo Braat on May 11, 2013, 3:34 PM
    5. I bought two of the G4 cars but... - david nickels on May 11, 2013, 4:25 PM
    6. IFA W50 in 1/72 - Chris Grove on May 11, 2013, 4:31 PM
    7. A 32nd B-17 - Luke Pitt on May 11, 2013, 4:57 PM
      1. Wingnut Wings... - bobCollignon on May 11, 2013, 9:02 PM
        1. Panda miniatures 38T in 1/16th - Brock Hopkins III on May 11, 2013, 9:08 PM
      2. Same. Same. There is something way cool about the 17. - Mike Witous on May 12, 2013, 10:24 PM
      3. the B-17 in 1:32 for me too - Stefan Bernet on May 13, 2013, 7:30 AM
    8. Willy's MB; 1/1 scale - Christopher Mrosko on May 11, 2013, 9:32 PM
      1. That would be nice - Shawn Ferguson on May 16, 2013, 1:14 AM
    9. all.. - emanuel morales (Zeke) on May 12, 2013, 1:14 AM
    10. Due to budget constaints.... - Shane Gowan on May 12, 2013, 3:46 AM
    11. I'm not buying... - Dave Coyne on May 12, 2013, 2:10 PM
    12. too many to count.. - Mike Duguay on May 12, 2013, 8:39 PM
    13. Im still resisting but....... - Chris Harrach on May 15, 2013, 1:45 PM
    14. Must resist... - Ken Holland on May 17, 2013, 6:56 PM
     
  13. LF AFV Club 251/9 instructions View Thread - james surratt on May 11, 2013, 11:54 AM
  14.  
  15. Steel Master N.A. magazine UPDATE View Thread - Brian J. Brown on May 10, 2013, 5:00 PM
    1. Eating (well deserved) Crow - Gary Hoyt on May 10, 2013, 8:10 PM
    2. Jeff always a class act! nt - Paul Roberts on May 10, 2013, 8:32 PM
      1. The Defence House website will continue - John Prigent on May 14, 2013, 4:28 AM
     
  16. Tank Workshop For Sale View Thread - Jay Galbierz on May 10, 2013, 11:22 AM
    1. Re: Tank Workshop For Sale - Scott Fraser on May 10, 2013, 5:51 PM
     
  17. Steel Master N.A. magazine ist kaput View Thread - Brian J. Brown on May 10, 2013, 7:34 AM
    1. wow that was fast - david nickels on May 10, 2013, 8:36 AM
    2. Re: Steel Master N.A. magazine ist kaput - Rick Emrick on May 10, 2013, 11:36 AM
    3. Steel Master N.A. - Gary Hoyt on May 10, 2013, 1:10 PM
     
  18. looking for a Michael Budd............. View Thread - steve faxon on May 9, 2013, 3:23 PM
  19.  
  20. USMC Decals View Thread - Gary Hoyt on May 6, 2013, 1:59 PM
    1. USMC Decals - Georg Eyerman on May 6, 2013, 4:22 PM
      1. How about U.S. Navy and Air Force softskins - Bruton,Dave on May 7, 2013, 8:54 AM
    2. Archer does.... - Greg H on May 7, 2013, 7:51 AM
      1. Archer decals - Gary Hoyt on May 7, 2013, 12:04 PM
     
  21. Normandy experts I have a question View Thread - Stephen J. Pringle on May 6, 2013, 7:43 AM
    1. Re: Normandy experts I have a question - Ken Holland on May 8, 2013, 6:46 PM
      1. Just expanding my search.... - Stephen J. Pringle on May 8, 2013, 6:56 PM
     
  22. Peter Morton has passed View Thread - Christopher Mrosko on May 5, 2013, 6:58 PM
    1. Re - Pete Morton - Brian Murdoch on May 5, 2013, 7:50 PM
    2. He had great style....very sad - Luke Pitt on May 5, 2013, 8:15 PM
      1. I have several of his figures - Roger Cockburn on May 6, 2013, 2:40 AM
      2. ref .Pete Morton - Pat Birch on May 12, 2013, 3:35 PM
    3. I'm in shock - Dave OMeara on May 6, 2013, 8:32 AM
    4. Sad - Pat McGrath on May 7, 2013, 3:33 PM
    5. Very sad news - Derek Hansen on May 8, 2013, 3:29 AM
    6. Re: Peter Morton has passed - Alan McNeilly on May 8, 2013, 8:19 AM
    7. Ref . Pete Morton - Pat Birch on May 12, 2013, 3:57 PM
     
  23. Owner's name of Production company in France View Thread - Brock Beckstedt on May 5, 2013, 2:00 PM
    1. problems - tony zadro on May 5, 2013, 4:34 PM
    2. It is a strange virus that Azimut has. - ted nichols on May 5, 2013, 4:51 PM
      1. you are so right Ted - Detlev Kaczmarek on May 9, 2013, 9:25 PM
    3. Didier Chomette - Pat Stansell on May 5, 2013, 7:01 PM
      1. Thanks,Pat - Brock Beckstedt on May 6, 2013, 12:41 PM
    4. Have the same situation, 5 open and prepaid orders f... - Pavel Cherepanov on Jun 10, 2013, 11:39 AM
      1. Re: Have the same situation, 5 open and prepaid orders f... - Pavel Cherepanov on Jul 18, 2013, 4:39 AM
     
  24. Karaya Still in Business and shipping product to its US Distributors? View Thread - FranK Blanton on May 5, 2013, 8:07 AM
    1. Pacific Coast Models - Joe Bevans on May 5, 2013, 7:05 PM
     
  25. Is the Doobi D9 Variants book Delayed View Thread - C Johnson on May 5, 2013, 7:20 AM
    1. Five days overdue - Steven Brown on May 5, 2013, 9:50 AM
    2. re. D9 Doobi book delayed? - Mike Land on May 7, 2013, 9:29 PM
     
  26. Sad news from IPMS Telford / Shropshire Scale Modellers View Thread - Andrew Tomlinson on May 4, 2013, 4:12 PM
    1. So Sad... - Spencer Pollard on May 4, 2013, 4:40 PM
     
  27. AMPS North Florida Chapter View Thread - Mike Petty on May 3, 2013, 3:06 PM
    1. Excellent News Mike - Dave OMeara on May 4, 2013, 7:21 AM
      1. Yes great news for our area! - Ryan Harden on May 5, 2013, 10:41 AM
    2. Re: North Florida AMPS Chapter - Chuck Willis on May 6, 2013, 7:06 AM
     
  28. Vulcan models View Thread - Brock Hopkins III on May 3, 2013, 11:54 AM
    1. is that because of the lack of teeth on the drive ?? - jamie sumner on May 3, 2013, 10:51 PM
    2. Were they missing, short shot, lost? - Saul Garcia on May 3, 2013, 10:51 PM
      1. Sorry my post wasn't clear - Brock Hopkins III on May 3, 2013, 11:11 PM
        1. I don't see where Terry mentions not enough links... - Saul Garcia on May 4, 2013, 12:14 PM
          1. E-mail sent. - Brock Hopkins III on May 4, 2013, 1:19 PM
            1. Links sent, please post model when done... - Saul Garcia on May 4, 2013, 3:41 PM
              1. You should have received the track links by now... - Saul Garcia on May 11, 2013, 10:11 AM
        2. If You Can't Reach Them... - Joe Bakanovic on May 4, 2013, 9:26 PM
          1. What about I send you a kit and you fix the issues? - Saul Garcia on May 4, 2013, 10:09 PM
            1. Done........n/t - Joe Bakanovic on May 5, 2013, 1:42 PM
     
  29. Is it possible to purchase parts from AFV Club? View Thread - Brian Colburn on May 2, 2013, 6:56 PM
    1. AFV refers people to their US importer for inqueries - david nickels on May 3, 2013, 7:52 AM
     
  30. rbmodel in US? View Thread - Dave Hansen on May 2, 2013, 6:12 PM
    1. Check with AK Interactive USA - ERIK ROBERSON on May 2, 2013, 7:32 PM
      1. Re: Check with AK Interactive USA - Gary Owsley on May 3, 2013, 12:54 AM
        1. LOL nt - Roman Volchenkov on May 3, 2013, 9:03 AM
        2. WWOS - Matthew Pritchett on May 4, 2013, 11:08 AM
    2. RB ordering - Ian McPherson on May 2, 2013, 11:54 PM
    3. Lots of places to get RB Model - Sean Lynch on May 3, 2013, 1:53 AM
    4. I had poor service from RB directly - david nickels on May 3, 2013, 7:55 AM
      1. RB - Ian MacAulay on May 3, 2013, 8:55 AM
        1. They were recommended but... - david nickels on May 3, 2013, 3:35 PM
    5. jadarhobby,pl - Roman Volchenkov on May 3, 2013, 9:03 AM
    6. I did eBay direct - Rob Morales on May 3, 2013, 4:02 PM
     
  31. photos and facebook View Thread - Bernie McKenna on May 2, 2013, 2:23 PM
    1. the only 'con' - Chris Meddings on May 2, 2013, 2:30 PM
      1. depends - Thomas Hartwig on May 2, 2013, 3:31 PM
      2. Re: the only 'con' - Olaf Kievit on May 2, 2013, 3:59 PM
        1. mine is set to public - Chris Meddings on May 3, 2013, 10:21 AM
          1. settings - Neil Lyall on May 3, 2013, 11:49 PM
            1. I know Neil - Chris Meddings on May 4, 2013, 7:22 AM
              1. Re: I know Neil - Neil Lyall on May 4, 2013, 9:17 AM
                1. Re: I know Neil - Chris Meddings on May 4, 2013, 9:55 AM
      3. Re: the only 'con' - Neil Lyall on May 3, 2013, 3:06 AM
    2. Re: photos and facebook - Bernie McKenna on May 3, 2013, 11:39 AM
    3. NO to Facebook on so many levels - Alan Brown on May 5, 2013, 11:47 AM
    4. the bigger issue... - Anthony Guarderas on May 8, 2013, 3:54 PM
     
  32. Looking for Faller stockists in Midlands, UK View Thread - Andrew Tomlinson on May 2, 2013, 8:12 AM
    1. Andrew Look Here - C Johnson on May 2, 2013, 9:20 AM
      1. thanks, oops but that's a dodgy link. - Andrew Tomlinson on May 2, 2013, 10:18 AM
        1. ooppsss yes sorry try these - C Johnson on May 2, 2013, 11:39 AM
          1. Useful. - Andrew Tomlinson on May 2, 2013, 11:52 AM
     
  33. Urban camo View Thread - Andy Barnett on May 2, 2013, 4:19 AM
    1. Possible but doubtful - John Tapsell on May 2, 2013, 4:22 PM
    2. Re: Urban camo - Henri-Pierre Mas on May 3, 2013, 1:17 PM
     
  34. Break or brake? View Thread - Clayton Sokoll on May 2, 2013, 3:37 AM
    1. Brake. - Stephen Tegner on May 2, 2013, 6:43 AM
     
  35. Same vehicle, different scales, same kit manufacturer View Thread - Andrew Ting on May 2, 2013, 12:05 AM
    1. Re: Same vehicle, different scales, same kit manufacturer - Rob Gronovius on May 2, 2013, 7:27 AM
    2. That 1/72nd Blitz is the old ESCI, but Italeri did the Blitz in 1/24th, and I'd say.... - Hall, Tom on May 2, 2013, 11:21 AM
     
  36. Looking for Mark Hartig View Thread - Ed Kubiak on May 1, 2013, 6:50 PM
  37.  
  38. Off topic...again View Thread - Mirko Bayerl on May 1, 2013, 8:23 AM
    1. My advice (avoid a blog) - Steven Brown on May 1, 2013, 8:57 AM
      1. Thanks Steven.. - Mirko Bayerl on May 1, 2013, 9:08 AM
    2. Blogspot is pretty straight forward - Ken Abrams on May 1, 2013, 9:25 AM
      1. exactly! - Roman Volchenkov on May 1, 2013, 10:00 AM
      2. Agreed with Ken - Chris Jerrett on May 1, 2013, 10:02 AM
        1. Thanks guys - Mirko Bayerl on May 1, 2013, 11:30 AM
          1. templates - Roman Volchenkov on May 1, 2013, 12:26 PM
            1. Du må ha mange Takk , Roman :) grejt ( n/t) - Mirko Bayerl on May 1, 2013, 12:48 PM
              1. bare higgelig :) nt - Roman Volchenkov on May 1, 2013, 12:59 PM
    3. Good Idea! - Stephen J. Pringle on May 1, 2013, 11:29 AM
      1. Well well.... - Mirko Bayerl on May 1, 2013, 11:40 AM
        1. There is - Stephen J. Pringle on May 1, 2013, 1:14 PM
    4. in my opinion depends on whether you want it or reading participatory - emanuel morales (Zeke) on May 1, 2013, 2:30 PM
    5. Regarding blogs - Theo Braat on May 1, 2013, 5:23 PM
    6. Go on Mirko! - Javier de Luelmo - Diesel on May 1, 2013, 6:29 PM
      1. Points are taken.. - Mirko Bayerl on May 2, 2013, 12:35 AM
        1. "dusto" = polvo - Antonio Martín Tello on May 2, 2013, 3:22 AM
          1. Antonio, Javier !! - gracias !!!! :) - Mirko Bayerl on May 2, 2013, 2:09 PM
        2. Hi man - Javier de Luelmo - Diesel on May 2, 2013, 1:45 PM
    7. Google Blogger (Blogspot) - zero tech knowledge or experience required - Neil Lyall on May 2, 2013, 3:45 AM
      1. Starting a blog - Russ Hammond on May 2, 2013, 12:57 PM
        1. Guys ..... - Mirko Bayerl on May 2, 2013, 2:06 PM
        2. So true... - John Tapsell on May 2, 2013, 4:26 PM
     
  39. Unwanted ads on ML? View Thread - Marc Brandes on Apr 30, 2013, 12:29 PM
    1. Marc, you have malware... - Saul Garcia on Apr 30, 2013, 3:02 PM
      1. Get Malwarebytes Anti-Malware - Joseph R. Zrodlowski on Apr 30, 2013, 4:16 PM
        1. Thanks Joseph - Marc Brandes on May 3, 2013, 3:43 PM
          1. Your Welcome, Marc - Joseph R. Zrodlowski on May 3, 2013, 8:48 PM
    2. I'm still trying to figure out what "wanted" ads are! - Roy Stevens on Apr 30, 2013, 5:16 PM
      1. My brain operates at 15kc - Joseph R. Zrodlowski on Apr 30, 2013, 10:14 PM
    3. Re: Unwanted ads on ML? - Rob Gronovius on Apr 30, 2013, 6:43 PM
    4. Me too - Dave Coyne on Apr 30, 2013, 7:46 PM
      1. Use an adblocker! - Nick Morgan on May 1, 2013, 12:03 AM
        1. That almost worked. - Dave Coyne on May 1, 2013, 8:00 AM
          1. Only with Google Chrome - Marc Brandes on May 1, 2013, 3:36 PM
            1. For Chrome... - Saul Garcia on May 1, 2013, 3:54 PM
          2. Obviously, you still have the malware then... - Saul Garcia on May 1, 2013, 3:44 PM
            1. Well, did it work? It would be nice to know if it did or not... - Saul Garcia on May 3, 2013, 10:42 AM
              1. It worked - Marc Brandes on May 3, 2013, 2:44 PM
                1. Good to know it worked, there are other tricks to try... - Saul Garcia on May 4, 2013, 10:58 AM
                  1. Mine works too now - Dave Coyne on May 5, 2013, 9:15 PM
     
  40. Workshop Tour View Thread - Matt Deck on Apr 30, 2013, 11:23 AM
    1. Really nice - open, well lit, clean, nice! - Scott Gentry on Apr 30, 2013, 12:04 PM
    2. How did you get a copy of my cranial scan?!? - Joseph R. Zrodlowski on Apr 30, 2013, 10:17 PM
      1. Mancave - FranK Blanton on May 1, 2013, 6:09 PM
    3. Man Cave Comments - Mike Carroll on May 1, 2013, 7:17 PM
     
  41. No Tamiya Putty any more?? View Thread - Markus Tost on Apr 29, 2013, 4:03 PM
    1. Also in Poland - Jeff Hamblen on Apr 29, 2013, 5:21 PM
      1. Szynka, I mean Ham, I should look you up... - Saul Garcia on Apr 29, 2013, 9:03 PM
    2. Tamiya Putty comes and goes... - Patrick Germain on Apr 29, 2013, 6:01 PM
    3. Seen it in my local Hobby Lobby - Rob Gronovius on Apr 29, 2013, 10:45 PM
    4. Re: No Tamiya Putty any more?? - Gary Owsley on Apr 30, 2013, 1:14 AM
    5. Can - Jon Greenwood on Apr 30, 2013, 12:13 PM
     
  42. Spray Booth Reccomendations View Thread - Ian Barraclough on Apr 29, 2013, 3:47 PM
    1. how about? - Jesse Naughton on Apr 29, 2013, 4:46 PM
      1. Thanks Jesse... - Ian Barraclough on Apr 29, 2013, 5:04 PM
        1. well... - Jesse Naughton on Apr 29, 2013, 9:14 PM
          1. Thanks Again Jesse - Ian Barraclough on Apr 30, 2013, 9:53 AM
     
  43. Need help from Rob Gronovius View Thread - Dave Black on Apr 29, 2013, 3:01 PM
    1. Which one???? - Mark Aldrich on Apr 29, 2013, 5:35 PM
      1. Re: Which one???? - Dave Black on Apr 29, 2013, 8:05 PM
    2. See Related Thread - Rob Skipper on Apr 29, 2013, 8:51 PM
      1. Re: See Related Thread - Dave Black on Apr 29, 2013, 9:29 PM
    3. Re: Need help from Rob Gronovius - Rob Gronovius on Apr 29, 2013, 10:48 PM
      1. Re: Need help from Rob Gronovius - Dave Black on Apr 30, 2013, 7:57 AM
     
  44. Group Build - British and Commonwealth Vehicles of WWII View Thread - Iain Mayell on Apr 28, 2013, 8:24 PM
  45.  
  46. U.P. Scale Modelers Spring Contest Photos View Thread - Scott Smith on Apr 28, 2013, 8:16 PM
    1. Thanks! - Mike Carroll on May 9, 2013, 12:40 PM
     
  47. Just for fun.... View Thread - Mirko Bayerl on Apr 28, 2013, 5:55 PM
    1. I second that. - Beau Minnick on Apr 28, 2013, 6:01 PM
    2. I'll bite on this one. - Chris Jerrett on Apr 28, 2013, 8:17 PM
    3. Well...since you're asking - Tom Neeson on Apr 28, 2013, 10:03 PM
      1. Well.. - Mirko Bayerl on Apr 29, 2013, 12:28 AM
    4. this is easy! - will thorson on Apr 29, 2013, 1:06 AM
    5. I've never seen that Panther Dio before - Luke Pitt on Apr 29, 2013, 1:45 AM
    6. Inspirational! - Cliff Leverette on Apr 29, 2013, 10:35 AM
    7. Tamiya Catalog Dio's... - Brian N Stanley on Apr 29, 2013, 11:14 PM
      1. oh yeah! Tamiya Centrefolds - Graeme Davidson on Apr 30, 2013, 8:12 PM
        1. Mirko is my inspiration . - Andy Argent on May 13, 2013, 5:08 PM
    8. I'm not sure the question .. - emanuel morales (Zeke) on Apr 30, 2013, 11:57 PM
      1. Yes of course... - Mirko Bayerl on May 1, 2013, 3:30 AM
        1. Argentina - emanuel morales (Zeke) on May 1, 2013, 2:13 PM
          1. Si, muchos Intressanto - Mirko Bayerl on May 1, 2013, 3:17 PM
            1. :) - Roman Volchenkov on May 1, 2013, 3:37 PM
            2. well.. - emanuel morales (Zeke) on May 1, 2013, 11:34 PM
     
  48. Jeep tires View Thread - Gary Hoyt on Apr 28, 2013, 12:06 PM
    1. check with tankworkshop.. n/t - Kenneth Childres on Apr 28, 2013, 1:50 PM
    2. Minor Web - Vinnie Branigan on Apr 28, 2013, 4:24 PM
     
  49. Some posts below, the Fairfax VA mode show yesterday... View Thread - Mike Riedeman on Apr 28, 2013, 9:28 AM
    1. Fat fingers should read Model show..need more coffee! N/T - Mike Riedeman on Apr 28, 2013, 9:30 AM
    2. It was great fun! - Richard Isner on Apr 30, 2013, 4:00 AM
     
  50. Addition to post below about stripping acrylic paint from a resin kit View Thread - Graeme Carruthers on Apr 28, 2013, 7:19 AM
  51.  
  52. Did Israel ever use the M1009 ? View Thread - Luke Pitt on Apr 27, 2013, 9:46 PM
    1. I believe they did - Rob Gronovius on Apr 28, 2013, 6:36 PM
    2. Re: Did Israel ever use the M1009 ? - Henri-Pierre Mas on Apr 29, 2013, 1:52 PM
     
  53. Bronco after sales View Thread - Mike Doonan on Apr 27, 2013, 4:10 PM
    1. Re: Bronco after sales - Joseph R. Zrodlowski on Apr 27, 2013, 7:53 PM
      1. Re: Bronco after sales - Mike Doonan on Apr 28, 2013, 3:30 PM
        1. Replacements. - Erik Ahlström on Apr 29, 2013, 7:24 AM
     
  54. Great Service View Thread - Joe Bevans on Apr 27, 2013, 2:22 PM
  55.  
  56. Glycerine as a Chipping medium View Thread - Jon Greenwood on Apr 27, 2013, 2:49 AM
    1. Take a hike - Chris Jerrett on Apr 27, 2013, 8:20 AM
      1. Gezz... - Frank Michaels on Apr 27, 2013, 9:02 AM
        1. Agree - david nickels on Apr 27, 2013, 11:31 AM
        2. Re: Gezz... - Ken Abrams on Apr 27, 2013, 12:39 PM
      2. Not got no boots - Jon Greenwood on Apr 27, 2013, 11:51 AM
    2. interesting link - Ken Abrams on Apr 27, 2013, 9:07 AM
      1. Re: interesting link - Jon Greenwood on Apr 27, 2013, 12:10 PM
        1. Re: interesting link - Ken Abrams on Apr 27, 2013, 12:27 PM
          1. Do you have hair? - Joseph R. Zrodlowski on Apr 27, 2013, 6:15 PM
            1. LOL! - Ken Abrams on Apr 27, 2013, 6:22 PM
              1. Delaware River Mud (Only pertains to places where baseball is played) - Joseph R. Zrodlowski on Apr 27, 2013, 8:19 PM
    3. Re: Glycerine as a Chipping medium - Olaf Kievit on Apr 27, 2013, 1:29 PM
      1. exactly - Ken Abrams on Apr 27, 2013, 1:32 PM
        1. What concerns me is who champions the shelf-ready products... - Roy Stevens on Apr 27, 2013, 3:16 PM
          1. wait wut? - Ken Abrams on Apr 27, 2013, 3:39 PM
            1. As long as you can keep your kids fed do what you want. - Roy Stevens on Apr 27, 2013, 6:23 PM
              1. sigh - Ken Abrams on Apr 27, 2013, 6:30 PM
                1. Okay, Fair enough, opinion respected! ...n/t - Roy Stevens on Apr 27, 2013, 6:43 PM
                  1. Thank you, and I yours. n/t - Ken Abrams on Apr 27, 2013, 6:48 PM
          2. Ok, work with me here.... - Gary Owsley on Apr 28, 2013, 2:01 AM
            1. Re: Ok, work with me here.... - Chris Jerrett on Apr 28, 2013, 8:31 AM
            2. No thanks; I come here to play, not to work. :-) - Roy Stevens on Apr 28, 2013, 1:14 PM
              1. Didn't go any where - Gary Owsley on Apr 28, 2013, 4:04 PM
                1. LOL... If you ever need a lift... n/t - Roy Stevens on Apr 28, 2013, 4:51 PM
    4. thinking outside the box...remember this guy? - Graeme Davidson on Apr 27, 2013, 3:48 PM
      1. Your last two points - Ken Abrams on Apr 27, 2013, 3:59 PM
        1. Actually Ken - Jon Greenwood on Apr 27, 2013, 5:58 PM
          1. AK? - Ken Abrams on Apr 27, 2013, 6:03 PM
    5. Prof Wizard - Graeme Davidson on Apr 27, 2013, 4:09 PM
      1. LOL, good heavens Graeme, you've found a practical use for... - Roy Stevens on Apr 27, 2013, 6:13 PM
    6. "beating the brand name" has been going on for a long time - Kurt Laughlin on Apr 27, 2013, 4:53 PM
      1. This - Ken Abrams on Apr 27, 2013, 6:06 PM
    7. OMG!!! I ADMIT IT!!! - Pat Stansell on Apr 27, 2013, 5:19 PM
      1. MMMMMM...pickles, the other food group... - Roy Stevens on Apr 27, 2013, 6:16 PM
    8. OMG!!! I ADMIT IT!!! - Pat Stansell on Apr 27, 2013, 5:19 PM
      1. ha! - Graeme Davidson on Apr 27, 2013, 6:07 PM
        1. Graeme... - Pat Stansell on Apr 28, 2013, 10:37 AM
    9. Just trying to be helpful - Chris Jerrett on Apr 27, 2013, 7:02 PM
     
  57. Fairfax Model Classic Tomorrow...Saturday! View Thread - Richard Isner on Apr 26, 2013, 8:41 PM
  58.  
 << Prev 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31   Next >> 

Visitors in this forum in the last 10 minutes: 10 Visitors
10 guests


Terms and Conditions of Use
Report abuse