Home > Discussion Groups > General

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement


General AFV Modelling Discussion Group

Hosted by Al Bowie and Brett Green, the General AFV Modelling discussion group covers any general military modelling topic including industry news and announcements.

Not logged in | Login | Create AccountSearch    Chat!    Home    Post Message
  1. 2013 AMPS National show exclusive: all access pass to Ft. Benning Armor and Cavalry View Thread - Jesse Naughton on Feb 17, 2013, 8:22 PM
    1. Price? - Christopher Mrosko on Feb 18, 2013, 7:56 AM
      1. The price is right... - Jesse Naughton on Feb 18, 2013, 8:06 AM
        1. what about vendors? - Christopher Mrosko on Feb 18, 2013, 8:23 AM
          1. Cost - roy chow on Feb 18, 2013, 8:27 AM
            1. ???? I'm talking about signing up for the tour - Christopher Mrosko on Feb 18, 2013, 8:31 AM
              1. I'm a vendor already why - Christopher Mrosko on Feb 18, 2013, 8:38 AM
                1. Ahhhh.... I see your prob - roy chow on Feb 18, 2013, 8:44 AM
                  1. Thanks Roy! - Christopher Mrosko on Feb 18, 2013, 9:30 AM
                2. You only have to pay $29 per seat - Roderick Bell on Feb 18, 2013, 10:38 AM
                  1. It worked! - Christopher Mrosko on Feb 18, 2013, 11:43 AM
                    1. Re: It worked! - Roderick Bell on Feb 18, 2013, 12:32 PM
      2. sounds great! - Christopher Mrosko on Feb 18, 2013, 8:15 AM
    2. A Lot of Rare Vehicles Here - Gregg Gaither on Feb 19, 2013, 9:09 PM
     
  2. An Idea for Magazine Publishers View Thread - Bob Muckley on Feb 17, 2013, 4:08 PM
    1. It IS a good idea Bob... - Mark Neville on Feb 17, 2013, 5:31 PM
      1. Solution - Jamie Haggo on Mar 20, 2013, 11:59 AM
    2. Online Coverage - Al Bowie on Feb 18, 2013, 5:09 AM
      1. Well, yes and no - Bob Muckley on Feb 18, 2013, 8:00 AM
     
  3. Flat Aluminium Paint Needed View Thread - Ian Barraclough on Feb 17, 2013, 2:40 PM
    1. what are you painting? - david nickels on Feb 17, 2013, 8:23 PM
     
  4. Looking for a Japanese modeller's site View Thread - Pat McGrath on Feb 17, 2013, 9:59 AM
    1. Has to be Kunihito San... - Darren thompson on Feb 17, 2013, 10:09 AM
      1. That's it - Pat McGrath on Feb 17, 2013, 12:10 PM
     
  5. Plus Model 420 U.S. Ammunition Boxes Vietnam View Thread - Mark Aldrich on Feb 17, 2013, 9:52 AM
  6.  
  7. Amsterdam- modelling, military book shops, historical sites ? View Thread - Neil Lyall on Feb 16, 2013, 9:08 PM
    1. Re : A'dam - modelling etc.... - Sam Alderlieste on Feb 16, 2013, 9:48 PM
      1. thank you - Neil Lyall on Feb 17, 2013, 6:12 AM
      2. One small but possibly important correction - KL on Feb 17, 2013, 7:35 AM
        1. Re: One small but possibly important correction - Neil Lyall on Feb 20, 2013, 2:46 AM
     
  8. Is it possible to buy DML/Dragon/Cyber-Hobby sprues? View Thread - Brian Colburn on Feb 16, 2013, 6:05 PM
    1. they do not seem to be inclined to sell "spare" parts - david nickels on Feb 17, 2013, 8:17 AM
     
  9. Steel Masters Magazine English edition View Thread - Jamie Haggo on Feb 16, 2013, 3:07 PM
    1. Different - Al Bowie on Feb 17, 2013, 12:58 AM
    2. Re: english Steel Masters - Mark O Hanlon on Feb 17, 2013, 8:30 AM
      1. agree with Mark - bobCollignon on Feb 17, 2013, 11:38 AM
    3. German version too - Rob Ferreira on Feb 17, 2013, 10:51 AM
      1. Once upon a time - Al Bowie on Feb 17, 2013, 3:47 PM
        1. Defence House publishing link - FranK Blanton on Feb 18, 2013, 3:35 PM
     
  10. Inside the Armour Churchill Decals Corrections - an Update View Thread - Chris Meddings on Feb 16, 2013, 7:13 AM
    1. You read my mind! - Alan Brown on Feb 16, 2013, 3:27 PM
     
  11. Got sent an interesting video link..... View Thread - Shane Gowan on Feb 15, 2013, 9:26 PM
  12.  
  13. G.l. Joe Kits View Thread - Chris.Nelmes on Feb 15, 2013, 7:06 PM
    1. I recall those - david nickels on Feb 15, 2013, 7:42 PM
    2. saw the MOBAT on ebay not too long ago - Graeme Davidson on Feb 15, 2013, 7:53 PM
    3. Knick Knack, Paddy-Whack - D. McKeever on Feb 15, 2013, 8:12 PM
    4. I've still got the tank I built around 82-83 - Rob Gronovius on Feb 16, 2013, 1:00 AM
    5. G.I. Joe's from the 1980's, pleeeeease..... - Mike Riedeman on Feb 16, 2013, 10:12 AM
    6. A Tank, a Jeep, and a Motorcycle - Michael Karnowka on Feb 16, 2013, 12:40 PM
      1. thank you all - Anonymous on Feb 17, 2013, 2:05 PM
        1. sorry,forgot to type that name n/t - chris.nelmes on Feb 17, 2013, 2:06 PM
     
  14. Any Hobby Shops in Daejeon, South Korea? View Thread - Gary Donaldson on Feb 15, 2013, 4:33 PM
  15.  
  16. KITMEET 1.3: You are invited! View Thread - Javier de Luelmo - Diesel on Feb 15, 2013, 2:11 PM
  17.  
  18. What do you love about our hobby? View Thread - Steven Brown on Feb 14, 2013, 5:42 PM
    1. What do I love... - Steven C.Johnson on Feb 14, 2013, 6:33 PM
    2. in order of intensity - D. McKeever on Feb 14, 2013, 7:48 PM
      1. Wow just wow - David Schemel on Feb 14, 2013, 8:14 PM
        1. Actually from Seattle - D. McKeever on Feb 14, 2013, 8:57 PM
          1. If............ - Dan Rosecrans on Feb 14, 2013, 10:07 PM
          2. Fellow Cheeseheads...UNITE!!!! - Greg H on Feb 15, 2013, 8:52 AM
            1. We all love the Green and Gold. ... - D. McKeever on Feb 15, 2013, 9:05 AM
      2. I can dig it Dave. But you forgot sPzAbt. 503 and Kurt Knispel - Chaz Spaulding on Feb 14, 2013, 11:47 PM
        1. That was just off the cuff - D. McKeever on Feb 15, 2013, 12:21 AM
    3. A few of mine. - Stephen Tegner on Feb 15, 2013, 1:49 AM
      1. What I love about our Hooby - FranK Blanton on Feb 15, 2013, 6:58 AM
        1. I love Franks truck - Danny Egan on Feb 15, 2013, 11:19 AM
          1. I also love Frank's truck - David Schemel on Feb 15, 2013, 11:30 AM
          2. Yikes! - Mike Carroll on Feb 15, 2013, 12:46 PM
    4. The things I love - Hervé Charbonneau on Feb 15, 2013, 9:40 AM
    5. I love all the hot groupies- - ted nichols on Feb 18, 2013, 4:05 PM
     
  19. Games Workshop USA customer service, top notch View Thread - Mike Duguay on Feb 14, 2013, 3:15 PM
  20.  
  21. Fantastic service from HLJ and their mailing department View Thread - Cliff Leverette on Feb 14, 2013, 2:08 PM
  22.  
  23. AMPS 2013 Contest Rule Revisions Effective 1 Feb 2013 View Thread - Mike Petty on Feb 13, 2013, 10:40 PM
  24.  
  25. Griffon Model = No Vendor Support or Service View Thread - Ed Kubiak on Feb 13, 2013, 6:31 PM
  26.  
  27. AMPS 2013 Show News - Fort Benning Tours View Thread - Chuck Willis on Feb 13, 2013, 10:57 AM
    1. Can't wait! - Chuck Aleshire on Feb 13, 2013, 4:03 PM
    2. Extra batteries and memory cards! - roy chow on Feb 14, 2013, 8:17 AM
     
  28. Lucky Model - poor service View Thread - simon king on Feb 13, 2013, 7:27 AM
    1. Same here... - Frank Michaels on Feb 13, 2013, 7:43 AM
    2. Available versus In Stock - david nickels on Feb 13, 2013, 7:49 AM
    3. Excellent customer service from LM - John Barnes on Feb 13, 2013, 7:50 AM
      1. Re: Excellent customer service from LM - simon king on Feb 13, 2013, 8:03 AM
        1. Re: Excellent customer service from LM - John Barnes on Feb 13, 2013, 8:14 AM
          1. Accepted - simon king on Feb 13, 2013, 8:22 AM
        2. Chinese new year - Terry Ashley on Feb 13, 2013, 4:44 PM
    4. Lucky Model Issues - Stephen Lord on Feb 13, 2013, 7:50 AM
      1. Used them for several years - Shane Gowan on Feb 13, 2013, 10:53 AM
      2. re: Lucky Model - Alex Bissett on Feb 13, 2013, 11:01 AM
        1. A good piece of advice - Al Bowie on Feb 14, 2013, 12:06 AM
    5. Never had any problems.... - Rob Harvey on Feb 13, 2013, 11:03 AM
    6. So-so service - Gary Owsley on Feb 13, 2013, 12:03 PM
      1. resolution - simon king on Feb 13, 2013, 12:39 PM
        1. Re: resolution - Peter Regan on Feb 14, 2013, 1:04 AM
      2. "In Stock" does not necessarily mean In Stock with Lucky Models. - Roy Stevens on Feb 13, 2013, 1:57 PM
        1. Me too but... - Roger Cockburn on Feb 13, 2013, 3:09 PM
        2. It does. - Pawel ''Vodnik'' Krupowicz on Feb 15, 2013, 3:27 AM
    7. Re: Lucky Model - poor service - Mike Doonan on Feb 13, 2013, 3:33 PM
      1. Re: Lucky Model - poor service - simon king on Feb 13, 2013, 3:56 PM
        1. Re: Lucky Model - poor service - Mike Doonan on Feb 13, 2013, 6:45 PM
    8. I was just about to start a thread!! - Greg Samson on Feb 13, 2013, 3:53 PM
      1. Sorry to hear about this Greg...... - Tim Lingle on Feb 14, 2013, 2:19 PM
      2. Sorry to hear about this Greg...... - Tim Lingle on Feb 14, 2013, 2:22 PM
    9. My experience - D. McKeever on Feb 13, 2013, 4:00 PM
    10. I have had good experience with them but they are slow sometimes ... - D. Kinder on Feb 13, 2013, 6:38 PM
    11. never had a problem - Graeme Davidson on Feb 13, 2013, 6:53 PM
    12. Lucky model and how they handle problems. - ted nichols on Feb 13, 2013, 9:40 PM
    13. Lucky Model Customer Service - Kevin J. McNichols on Feb 14, 2013, 11:13 AM
      1. Wow!!!! One more time- the "In Stock" status at Lucky isn't always accurate. - Roy Stevens on Feb 14, 2013, 1:13 PM
        1. No but - david nickels on Feb 14, 2013, 3:08 PM
          1. Never happens with Spruebrothers. - Gary Owsley on Feb 14, 2013, 5:02 PM
            1. True but they are expensive - david nickels on Feb 14, 2013, 6:29 PM
              1. Really? - Gary Owsley on Feb 15, 2013, 12:41 AM
            2. Blast has real time inventory implemented as well... - Christophe Jacquemont on Feb 14, 2013, 6:43 PM
              1. True, but... - Gary Owsley on Feb 15, 2013, 12:44 AM
            3. WRONG! - Pawel ''Vodnik'' Krupowicz on Feb 15, 2013, 3:39 AM
              1. Ok, then how about almost never? - Gary Owsley on Feb 15, 2013, 4:11 AM
    14. Please don't assume your email actually reached them!!! - Tim Lingle on Feb 14, 2013, 2:17 PM
      1. Please read the threads; or at least their titles... - Roy Stevens on Feb 14, 2013, 7:40 PM
      2. It did........ - simon king on Feb 15, 2013, 4:22 AM
    15. Great store, ordered many times, never a problem. - Christophe Jacquemont on Feb 14, 2013, 6:37 PM
      1. ***SIGH*** Hey Gary, is this sense of hopeless frustration at the inability... - Roy Stevens on Feb 14, 2013, 7:39 PM
        1. Yup. - Gary Owsley on Feb 15, 2013, 12:46 AM
        2. Real time inventory claim?!... - Pawel ''Vodnik'' Krupowicz on Feb 15, 2013, 3:34 AM
    16. My experience with LM - Eric Stanford on Feb 14, 2013, 7:52 PM
    17. Getting circular - MODERATOR on Feb 15, 2013, 5:40 AM
     
  29. Has M136 closed down? View Thread - Anthony Ryan on Feb 12, 2013, 12:11 PM
    1. closed forever - Thomas Hartwig on Feb 12, 2013, 3:42 PM
      1. This is very sad news - Anthony Ryan on Feb 16, 2013, 11:28 PM
     
  30. New TankArt book... View Thread - Rob Ferreira on Feb 12, 2013, 11:00 AM
    1. The Tank Art book ROCKS!!!!! - Christian Pålsson on Feb 13, 2013, 2:59 AM
    2. one of the best... - Frank Michaels on Feb 13, 2013, 7:52 AM
    3. Looks brilliant - Jason Chatwin on Feb 13, 2013, 8:20 AM
     
  31. Steel Master N.A. magazine View Thread - Brian J. Brown on Feb 12, 2013, 7:42 AM
    1. There is contact info - Dave_Block on Feb 12, 2013, 7:01 PM
     
  32. CAD modelller seeks project... View Thread - Pete Hamann on Feb 11, 2013, 11:54 PM
    1. Nothing to do with CAD, I´m afraid - FJCabeza on Feb 12, 2013, 5:19 PM
      1. Jeje... - Pete on Feb 12, 2013, 7:14 PM
        1. If you look for non-organic forms... - FJCabeza on Feb 13, 2013, 2:15 PM
          1. Un blindado de la guerra civil.... - Pete Hamann on Feb 13, 2013, 9:01 PM
            1. UNL 37 - FJCabeza on Feb 15, 2013, 9:48 PM
              1. Bueno...un UNL it is then... - Pete Hamann on Feb 15, 2013, 11:11 PM
                1. UNL 35 on ZIS 5 chassis - FJCabeza on Feb 16, 2013, 4:35 AM
                  1. UNL-35 quick CAD model - Pete on Feb 16, 2013, 7:33 PM
                    1. Looking good, - FJCabeza on Feb 17, 2013, 8:47 AM
     
  33. ModelPoint ? View Thread - william carls on Feb 11, 2013, 10:00 PM
    1. Soga - Greg Harker on Feb 12, 2013, 1:03 AM
      1. re: Soga - william carls on Feb 13, 2013, 12:05 PM
    2. Jadar also had some ................. - clive harman on Feb 14, 2013, 2:02 PM
      1. re; Jadar - william carls on Feb 14, 2013, 11:13 PM
     
  34. AMPS Judge's Certification Class, 15 Feb 2013 View Thread - Mike Petty on Feb 11, 2013, 8:23 PM
  35.  
  36. Hobby Shop Markup View Thread - Marton Berzeviczy on Feb 10, 2013, 10:06 PM
    1. Re: Hobby Shop Markup - John Rybak on Feb 10, 2013, 11:25 PM
    2. Mark up varies a lot - david nickels on Feb 11, 2013, 8:37 AM
    3. Re: Hobby Shop Markup - Mike Rechlicz on Feb 11, 2013, 10:47 AM
    4. Previous posters are correct - but the real world markups are less - Scott Gentry on Feb 11, 2013, 1:17 PM
    5. standard markup - Pete Hamann on Feb 11, 2013, 11:59 PM
     
  37. Nottingham MAFVA Open Day Pictures View Thread - Colin Rosenwould on Feb 10, 2013, 3:12 PM
    1. Here's a few more - Alan Brown on Feb 11, 2013, 4:42 PM
      1. Thanks... - Colin Rosenwould on Feb 12, 2013, 2:00 PM
     
  38. Hands-on painting seminar with AK interactive, March 30 2013, Albany NY USA View Thread - Danny Egan on Feb 10, 2013, 9:51 AM
  39.  
  40. Leopard 2 Tracks View Thread - Michael Lowe on Feb 10, 2013, 9:41 AM
    1. Agree, but make sure they really fit - Bret Kinman on Feb 10, 2013, 1:10 PM
     
  41. T55 conversion... View Thread - Matthew Mifsud on Feb 9, 2013, 5:38 PM
    1. Tamiya - Andy Taylor on Feb 10, 2013, 6:25 AM
     
  42. Sad news from the south west View Thread - Mark Hazzard on Feb 8, 2013, 12:53 PM
    1. Sad to hear that - Robert Manasherob on Feb 8, 2013, 5:26 PM
    2. Re: Sad news from the south west - Andy Argent on Feb 9, 2013, 6:41 PM
    3. Very sad news... - paul warner on Feb 10, 2013, 6:58 PM
      1. I'll always remember the massada emission!!!! - mjh on Feb 10, 2013, 7:49 PM
     
  43. Any model shop recommendations in the Detroit/Troy Michigan area View Thread - Frank LeMay on Feb 8, 2013, 10:52 AM
    1. Hobby Shops in the DetroitTroy area - Charles Davis on Feb 9, 2013, 6:17 PM
     
  44. Big Shout Out to Black Dog... View Thread - Edward Behun on Feb 7, 2013, 3:14 PM
    1. That's worthwhile praise! - Tom Morgan on Feb 7, 2013, 6:55 PM
     
  45. Open days, etc View Thread - Michael Shackleton on Feb 7, 2013, 2:24 PM
    1. Dutch open days - Bas Slaats on Feb 7, 2013, 4:52 PM
     
  46. Current favorite materials for making molds and casting resin? View Thread - Brian Colburn on Feb 6, 2013, 3:20 PM
    1. Not sure what you used, but... - Arthur Gamon on Feb 6, 2013, 6:55 PM
      1. Really depends on what you want to do. - Richard Isner on Feb 6, 2013, 10:05 PM
        1. Home or garage resin casting - Jason Miller on Feb 7, 2013, 7:33 PM
          1. Jason.....FABULOUS! - Richard Isner on Feb 9, 2013, 6:05 AM
        2. I'm not familiar with pressure casting.... - Brian Colburn on Feb 7, 2013, 9:02 PM
          1. Answers - Chris Grove on Feb 8, 2013, 6:21 PM
            1. Vacuum v's Pressure - Jason Miller on Feb 8, 2013, 9:10 PM
              1. Easy Vacuum Option - Richard Isner on Feb 9, 2013, 6:03 AM
                1. Easy Vacuume Option - Jason Miller on Feb 9, 2013, 4:53 PM
                  1. Fascinating... - Brian Colburn on Feb 12, 2013, 1:28 AM
     
  47. AK weathering mag madness.... View Thread - Rob Harvey on Feb 6, 2013, 2:17 PM
    1. AK weathering Mg - jay ruggiero on Feb 6, 2013, 3:49 PM
    2. OMG! - Mig Jimenez on Feb 7, 2013, 3:20 AM
    3. gezzz... - Frank Michaels on Feb 7, 2013, 6:21 AM
      1. well, apparently it has... - John Barnes on Feb 7, 2013, 7:21 AM
        1. A Fool and his money... - frank michaels on Feb 9, 2013, 10:32 AM
    4. At least 3 crazzies bidding on it - Scott Millican on Feb 7, 2013, 11:54 AM
    5. All Issues available as download - Jeff Feller on Feb 7, 2013, 8:55 PM
     
  48. Castoff update View Thread - Michael Lowe on Feb 6, 2013, 7:12 AM
    1. Re: Castoff update - Chris Meddings on Feb 7, 2013, 8:01 PM
      1. Re: Castoff update - Michael Lowe on Feb 8, 2013, 3:41 PM
     
  49. Dragon DS tracks View Thread - Kevin J. McNichols on Feb 5, 2013, 10:39 AM
    1. check your mail nt - D. McKeever on Feb 5, 2013, 12:43 PM
     
  50. Oh, yeah, and there's a couple of guys in the picture, too View Thread - Hall, Tom on Feb 5, 2013, 9:47 AM
    1. Time frame, and please amend your title to "a human and a vulcan"... - Mark Pieters on Feb 5, 2013, 11:13 AM
    2. Right-hand drive, british, ex MOD circus wagon? - Hall, Tom on Feb 5, 2013, 12:16 PM
    3. Judging from the registration - John Harris on Feb 5, 2013, 12:50 PM
      1. I want one! (pic) - Hall, Tom on Feb 5, 2013, 1:42 PM
        1. If you'll settle for 1/35 - Dave_Block on Feb 6, 2013, 7:04 PM
      2. It's in Hamburg, Germany - Stefan Krakow on Feb 5, 2013, 2:28 PM
        1. The photoshopped Spock doesn't fit the time frame. - Roy Stevens on Feb 5, 2013, 10:06 PM
          1. re: photoshopped Spock - Julian Marles on Feb 5, 2013, 10:26 PM
    4. John, Paul, Spock and Ringo. - Cliff Leverette on Feb 6, 2013, 3:25 PM
     
  51. AZIMUT View Thread - guenther-neumahr on Feb 5, 2013, 9:33 AM
    1. Re: AZIMUT - tony zadro on Feb 5, 2013, 1:37 PM
      1. Visited the shop last summer. - Roy Stevens on Feb 5, 2013, 10:09 PM
    2. Experience - John Harris on Feb 6, 2013, 11:38 AM
      1. Re: Experience - guenther.neumahr on Feb 6, 2013, 2:13 PM
      2. Azimut..... - Chris Grove on Feb 6, 2013, 4:23 PM
    3. You are not alone, I ordered some figures online in early November. - Mike Witous on Feb 7, 2013, 10:04 PM
    4. Azimut Productions shipment? - Brock Beckstedt on Feb 15, 2013, 10:53 AM
     
  52. What is the theme for AMPS this year? View Thread - David Farris on Feb 5, 2013, 8:21 AM
    1. "Civil Warriors" - Jesse Naughton on Feb 5, 2013, 9:42 AM
    2. "Civil Warriors" - Mike Roof on Feb 5, 2013, 9:47 AM
      1. Just to stoke the fire a bit... - bobCollignon on Feb 6, 2013, 10:36 PM
     
  53. Resin Wheels For The KRAZ-214B View Thread - C Johnson on Feb 4, 2013, 11:51 AM
  54.  
  55. Looking for Online Review of Dragon's New SAS Commanders Car View Thread - Brian Crowley on Feb 4, 2013, 12:16 AM
    1. Well there is this one but.. - Roger Cockburn on Feb 4, 2013, 4:09 AM
    2. Try looking on Mising Lynx - John Prigent on Feb 4, 2013, 6:47 AM
    3. Terry Ashley's thoughts in the Allied forum - Andrew Ting on Feb 4, 2013, 7:43 AM
      1. Well, he's deleted them whatever that may mean. n/t - Alan Mckenzie on Feb 4, 2013, 12:34 PM
        1. Nothing new there... - Kevin Johnson on Feb 5, 2013, 1:50 AM
     
  56. Chains View Thread - Doug Bauer on Feb 3, 2013, 2:03 PM
    1. Chains - Ian Barraclough on Feb 3, 2013, 2:12 PM
    2. They're called roller chains - Kurt Laughlin on Feb 3, 2013, 9:33 PM
    3. Depending on what you need - Aidrian Bridgeman-Sutton on Feb 4, 2013, 7:37 PM
    4. Thanks, guys. n/t - Doug Bauer on Feb 5, 2013, 1:56 PM
     
  57. Nacho Roces, I tried to email you. View Thread - Kimmo Siika on Feb 3, 2013, 12:53 PM
    1. Strange! - Nacho Roces on Feb 3, 2013, 2:38 PM
      1. email send. - Kimmo Siika on Feb 4, 2013, 1:23 AM
     
  58. Custom Decals View Thread - Miran Flores on Feb 3, 2013, 1:01 AM
    1. Black Lion - Jeff Hamblen on Feb 3, 2013, 4:00 AM
      1. Thanks - Miran Flores on Feb 3, 2013, 12:12 PM
        1. I can help you too - T. Metsovitis on Feb 6, 2013, 8:43 AM
          1. LM Decals - grahame Bredbere on Feb 8, 2013, 7:54 AM
          2. Thanks - Miran Flores on Feb 12, 2013, 5:30 PM
     
  59. Free beer in Nottingham? View Thread - Colin Rosenwould on Feb 1, 2013, 2:14 PM
  60.  
  61. Spend the Day with some gorgeous models View Thread - FranK Blanton on Feb 1, 2013, 7:54 AM
  62.  
  63. Phillip's Scale Models Swap Meet and Anniversary View Thread - Rick Emrick on Jan 31, 2013, 7:47 PM
  64.  
 << Prev 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36   Next >> 

Visitors in this forum in the last 10 minutes: 18 Visitors
dsfraser, 17 guests


Terms and Conditions of Use
Report abuse