Home > Discussion Groups > General

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement


General AFV Modelling Discussion Group

Hosted by Al Bowie and Brett Green, the General AFV Modelling discussion group covers any general military modelling topic including industry news and announcements.

Not logged in | Login | Create AccountSearch    Chat!    Home    Post Message
  1. North Surrey Military Modelling Group annual show 2012 View Thread - Simon Barrett on Oct 1, 2012, 2:10 PM
  2.  
  3. Capital City AMPS Chapter , just stood up View Thread - Anthony Sewards on Sep 30, 2012, 11:15 PM
    1. Re: Capital City AMPS Chapter , just stood up - John Rybak on Sep 30, 2012, 11:48 PM
    2. Re: Capital City AMPS Chapter - Chuck Willis on Oct 1, 2012, 7:02 AM
    3. Great! - roy chow on Oct 1, 2012, 7:27 AM
      1. Welcome Aboard! - Ian MacAulay on Oct 1, 2012, 9:15 AM
    4. Yee ha! - MikeRoof on Oct 1, 2012, 11:30 AM
    5. Congrats! - Chuck Aleshire on Oct 1, 2012, 6:07 PM
      1. Nice - Joe Bevans on Oct 1, 2012, 10:36 PM
    6. Huzzah! - Paul Roberts on Oct 1, 2012, 10:46 PM
    7. Welcome fellow treadhead - James Guld on Oct 2, 2012, 9:45 AM
    8. Capital City AMPS Chapter, just stood up - Mike Petty on Oct 2, 2012, 11:02 AM
     
  4. Palouse Area Modelers Show View Thread - Don Puckett on Sep 30, 2012, 5:14 PM
  5.  
  6. Meng Models to Attend Scale ModelWorld View Thread - John Tapsell on Sep 30, 2012, 4:44 PM
    1. Excellent n/t - John Harris on Oct 1, 2012, 12:34 PM
     
  7. AMPS East pics up yet? View Thread - Mike Duguay on Sep 30, 2012, 1:57 PM
    1. Some here - Jim Carswell on Sep 30, 2012, 4:40 PM
      1. Look on Scale Model Addict - FranK Blanton on Oct 1, 2012, 10:20 PM
     
  8. Least favorite pr most disappointing manufactuer View Thread - D. McKeever on Sep 30, 2012, 1:54 PM
    1. Re: Least favorite pr most disappointing manufactuer - Ken Holland on Sep 30, 2012, 6:01 PM
    2. I realize it's aircraft but - Eric McClure on Sep 30, 2012, 10:20 PM
    3. Modellers' least favourite manufacturer... - Andrew James on Oct 1, 2012, 3:57 AM
    4. Dragon! - Stephen Lord on Oct 1, 2012, 5:54 AM
      1. With all due respect - D. McKeever on Oct 1, 2012, 10:57 AM
    5. Dragon - GED CRANNY on Oct 1, 2012, 7:02 AM
      1. Bronco's instructions are also bad. - L. Bäuerl on Oct 2, 2012, 5:10 PM
    6. DML/Dragon, fit issues and those d@*N.... - Mike Riedeman on Oct 1, 2012, 7:15 AM
    7. DML/Dragon, fit issues and those d@*n... - Mike Riedeman on Oct 1, 2012, 7:15 AM
    8. Trumpeter, of course. nt - Roman Volchenkov on Oct 1, 2012, 10:24 AM
    9. Tamiya... - MikeRoof on Oct 1, 2012, 11:24 AM
    10. Tamiya - Kevin Johnson on Oct 1, 2012, 11:32 PM
    11. Tamiya - Dave Foster on Oct 2, 2012, 3:35 AM
      1. I thought they corrected the Meteor - Kevin Johnson on Oct 4, 2012, 9:15 PM
    12. Tamiya - Michael Kalbfleisch on Oct 2, 2012, 10:26 AM
      1. But the Tilly was good ! - Andrew Tomlinson on Oct 2, 2012, 4:34 PM
        1. Matilda - Chris Meddings on Oct 8, 2012, 11:37 PM
    13. Trumpeter - Michael Baskette on Oct 2, 2012, 9:43 PM
      1. 'Impossible Assembly?' - Kevin Johnson on Oct 4, 2012, 9:18 PM
     
  9. Decal setting solutions View Thread - Brian Dwight on Sep 30, 2012, 10:54 AM
    1. there are many and - david nickels on Sep 30, 2012, 12:56 PM
    2. Depends on the decals - Olaf Kievit on Sep 30, 2012, 12:58 PM
    3. Thanks for the input n/t - Brian Dwight on Oct 3, 2012, 10:40 AM
     
  10. Model clubs & shows in Alsace & Basel regions View Thread - Darren Thompson on Sep 30, 2012, 8:25 AM
  11.  
  12. Dragon View Thread - Martin McGowan on Sep 30, 2012, 6:39 AM
    1. Oops, was meant to be a response to the question below - Martin McGowan on Sep 30, 2012, 6:41 AM
     
  13. Your favorite armor model manufacturer View Thread - Owen R Auer on Sep 30, 2012, 1:15 AM
    1. Bronco - Roman Volchenkov on Sep 30, 2012, 6:28 AM
      1. Bronco - Owen R Auer on Sep 30, 2012, 11:34 AM
    2. Dragon - Martin McGowan on Sep 30, 2012, 6:42 AM
    3. Tasca would be my first choice.... - karl van sweden on Sep 30, 2012, 8:36 AM
      1. Second That!!!!! N/T - Mark Aldrich on Sep 30, 2012, 9:28 AM
    4. For Innovation in Subjects and Production... - Mike Roof on Sep 30, 2012, 9:57 AM
    5. Tamiya hands down - david nickels on Sep 30, 2012, 10:13 AM
    6. I like Fine Molds - Rob Gronovius on Sep 30, 2012, 11:11 AM
    7. AFV Club. - Jeremy Witt on Sep 30, 2012, 12:12 PM
      1. Seconded! AFV..... - Stephen Lord on Sep 30, 2012, 5:09 PM
    8. Dragon - D. McKeever on Sep 30, 2012, 1:50 PM
      1. Depends on the subject - Roger Cockburn on Sep 30, 2012, 3:58 PM
    9. Re: Your favorite armor model manufacturer - mike harbour on Sep 30, 2012, 4:18 PM
    10. AEF Designs - tony zadro on Sep 30, 2012, 6:12 PM
      1. I agree............ - Dan Rosecrans on Sep 30, 2012, 7:05 PM
    11. Tamiya n/t - Mike Riedeman on Oct 1, 2012, 7:14 AM
    12. Trumpeter, but.. - Eric Stanford on Oct 1, 2012, 10:31 PM
    13. Judging by sheer enjoyment from building--- Trumpeter. - Kevin Johnson on Oct 1, 2012, 11:40 PM
    14. AER Models - Roderick Bell on Oct 2, 2012, 3:57 PM
      1. AER - Michael Baskette on Oct 2, 2012, 10:04 PM
      2. Hey, I built T-28, it was a scream! - Kevin Johnson on Oct 4, 2012, 9:19 PM
    15. Re: Your favorite armor model manufacturer - Donny Bowen on Oct 6, 2012, 12:32 AM
    16. Hmmmm......I'm just happy we have so many options to choose from! - Tim Lingle on Oct 8, 2012, 10:28 AM
    17. Hmmmm......I'm just happy we have so many options to choose from! - Tim Lingle on Oct 8, 2012, 11:03 AM
    18. I would like to say Tamiya... - Greg Samson on Oct 15, 2012, 3:59 PM
     
  14. Nuts & Bolts website issues? View Thread - james surratt on Sep 29, 2012, 3:00 PM
  15.  
  16. N54 Download times...again. View Thread - Frank V. De Sisto on Sep 29, 2012, 8:45 AM
    1. Much better - Dave Coyne on Sep 29, 2012, 6:54 PM
     
  17. Rubber tires View Thread - Owen R Auer on Sep 28, 2012, 11:12 PM
    1. You probably couldn't get the depth of tread pattern - Rob Gronovius on Sep 29, 2012, 1:18 AM
    2. tread pattern - david nickels on Sep 29, 2012, 7:56 AM
      1. Resin - Owen R Auer on Sep 29, 2012, 10:55 PM
        1. Revell - Joseph R. Zrodlowski on Sep 30, 2012, 12:07 AM
        2. Many do - david nickels on Sep 30, 2012, 10:23 AM
    3. Molding constraints - Frank V. De Sisto on Sep 29, 2012, 8:43 AM
      1. Bandai has figured it out as well - Rob Gronovius on Sep 29, 2012, 9:44 AM
        1. they are also... - Sean Brannin on Sep 29, 2012, 3:47 PM
     
  18. Dragon customer service View Thread - GED CRANNY on Sep 28, 2012, 11:46 AM
    1. "What sort of reply would I get from them?" - Joseph R. Zrodlowski on Sep 28, 2012, 11:55 AM
     
  19. Great service Tiger Models!! View Thread - Jelle Renze Boelens on Sep 27, 2012, 9:07 AM
    1. great service, if a little slow... - Aaron Smischney on Sep 27, 2012, 1:03 PM
     
  20. Going to be in Edmonton, Alberta Sept 29-30 View Thread - John Rybak on Sep 27, 2012, 12:19 AM
  21.  
  22. Blast Models- Lead-time question View Thread - Mike Witous on Sep 26, 2012, 9:21 PM
    1. Heisenberg affects parcels as well as particles - Aidrian Bridgeman-Sutton on Sep 26, 2012, 11:11 PM
      1. Thanks Aidrian. I agree, it's the Uncertainty Principle at work. - Mike Witous on Sep 26, 2012, 11:27 PM
    2. Hong Kong - Mark Aldrich on Sep 27, 2012, 8:30 AM
      1. I think the delay is in country of origin and then customs - Mike Witous on Sep 27, 2012, 6:54 PM
    3. Similar experience - Pat Stansell on Sep 27, 2012, 11:14 AM
      1. Thanks Pat (BTW-Great stuff on MMIR) - Mike Witous on Sep 27, 2012, 6:52 PM
        1. No probs from OZ - Ronan O'Shea on Oct 1, 2012, 12:00 AM
     
  23. frustrated by PE tool clamps, need advice.. View Thread - Tracy Hancock on Sep 26, 2012, 4:30 PM
    1. check this! - Roman Volchenkov on Sep 26, 2012, 5:15 PM
      1. Thanks, Roman... - Tracy Hancock on Sep 26, 2012, 5:21 PM
        1. Another similar explantion with photos... - Mike Roof on Sep 26, 2012, 6:44 PM
     
  24. And more Euro Militaire photos... View Thread - Olaf Kievit on Sep 26, 2012, 10:57 AM
    1. Re: And more Euro Militaire photos... - peter regan on Sep 26, 2012, 3:53 PM
      1. Indeed Azimut (n/t) - Olaf Kievit on Sep 27, 2012, 8:57 AM
    2. Best PHOTO SET by far---Thank you Olaf ! - Adam Kuller on Sep 27, 2012, 1:38 AM
      1. Welcome! (n/t) - Olaf Kievit on Sep 27, 2012, 8:58 AM
    3. Morris - George Moore on Sep 28, 2012, 5:05 AM
      1. Azimut? - Michael Shackleton on Sep 28, 2012, 8:24 AM
        1. Re: Azimut? - Ken Holland on Sep 28, 2012, 11:00 AM
     
  25. New US AFV Modeling magazine View Thread - Steve Zaloga on Sep 26, 2012, 7:55 AM
    1. Niiiiiice! - Joseph R. Zrodlowski on Sep 26, 2012, 4:08 PM
    2. Re: New US AFV Modeling magazine - Ray King on Sep 26, 2012, 5:38 PM
    3. Great news! - Chris Weeks on Sep 26, 2012, 9:29 PM
    4. Overseas distributors ? - Ray Blythe. on Sep 27, 2012, 1:38 AM
    5. Glad to read that Jeff is back in business on the hobby side... - Saul Garcia on Sep 27, 2012, 10:40 AM
    6. Xlnt!! B&N dumped MMiR in our area - Hall, Tom on Sep 28, 2012, 10:50 AM
     
  26. More Euromilitaire pictures View Thread - Stefan Bernet on Sep 25, 2012, 4:37 PM
  27.  
  28. twenot forum View Thread - Roman Volchenkov on Sep 25, 2012, 1:38 PM
    1. Have you registered on that forum? - Henry Klom on Sep 25, 2012, 2:41 PM
      1. Thanks, but what about administrator approval? - Roman Volchenkov on Sep 25, 2012, 5:45 PM
        1. have you revcieved an email? - Henry Klom on Sep 26, 2012, 2:28 AM
          1. not from administrator. - Roman Volchenkov on Sep 26, 2012, 3:04 AM
            1. Re: not from administrator. - Jan Peters on Sep 27, 2012, 3:50 PM
              1. thanks, Jan! nt - Roman Volchenkov on Sep 27, 2012, 5:55 PM
          2. I registered Sept. 25th to see how long it would take - Joseph R. Zrodlowski on Sep 27, 2012, 9:23 AM
            1. Re: I registered Sept. 25th to see how long it would take - Jan Peters on Sep 27, 2012, 3:49 PM
              1. Here's the Email I received, Jan - Joseph R. Zrodlowski on Sep 27, 2012, 9:54 PM
                1. Re: Here's the Email I received, Jan - Jan Peters on Sep 28, 2012, 3:17 AM
                  1. That Wasn't a Nickname - Joseph R. Zrodlowski on Sep 28, 2012, 8:43 AM
                    1. Re: That Wasn't a Nickname - Jan Peters on Sep 29, 2012, 1:42 PM
     
  29. Euromilitaire photos. View Thread - Pekka Nieminen on Sep 25, 2012, 9:17 AM
    1. They look fine n/t - Dave Coyne on Sep 25, 2012, 9:10 PM
     
  30. Unbelievable!!!!! View Thread - Mark Aldrich on Sep 25, 2012, 8:40 AM
    1. Funny - Dave Coyne on Sep 25, 2012, 9:03 PM
      1. Does it say 'Quality'? n/t - Patrick Germain on Sep 26, 2012, 7:06 PM
     
  31. Euro Militaire 2012 pics, View Thread - Phil Hyslop on Sep 24, 2012, 4:17 PM
    1. Quality all the way - Dave Coyne on Sep 24, 2012, 6:01 PM
    2. Excellent stuff, - Andy Argent on Sep 24, 2012, 6:26 PM
    3. Re: Euro Militaire 2012 pics, - Mike Rechlicz on Sep 24, 2012, 6:31 PM
     
  32. Seems to be pretty fast for me (in Texas) View Thread - Roderick Bell on Sep 24, 2012, 2:49 PM
    1. Your lucky it takes me a couple of hours before i can browse this site some times....nm - Doug Kinder on Sep 24, 2012, 10:13 PM
     
  33. N54 down-load times View Thread - Frank V. De Sisto on Sep 23, 2012, 6:48 PM
    1. Very slow - Neil Stokes on Sep 23, 2012, 7:56 PM
    2. Same Deal in Aulde Breukelen, Nova Eboraci - Joseph R. Zrodlowski on Sep 23, 2012, 8:44 PM
    3. Painfully slow - Jim Carswell on Sep 23, 2012, 9:10 PM
    4. I've noticed it here on ML... - Rob Gronovius on Sep 24, 2012, 12:10 AM
    5. same problem in Norway. nt - Roman Volchenkov on Sep 24, 2012, 3:35 AM
      1. Same question... - bobCollignon on Sep 24, 2012, 10:56 AM
    6. Same problem in Ireland - Dave Coyne on Sep 24, 2012, 2:26 PM
    7. Extremely bad over on Hyperscale... - Paul Budzik on Sep 24, 2012, 7:25 PM
    8. Re: N54 down-load times - Keith Bickel on Sep 24, 2012, 9:46 PM
    9. I've been having.... - Cpt. C. Sosebee, USA (ret) on Sep 24, 2012, 9:55 PM
      1. Can we get a grip here please? - Frank V. De Sisto on Sep 25, 2012, 7:27 AM
        1. Hold on a second Frank... - Dave Coyne on Sep 25, 2012, 8:58 PM
          1. But I said right out front... - Frank V. De Sisto on Sep 25, 2012, 9:10 PM
            1. "insert smiley face here" - Joseph R. Zrodlowski on Sep 25, 2012, 10:31 PM
    10. It's varying today... - Frank Kranick on Sep 25, 2012, 9:47 AM
    11. In the words of Douglas Adams - MODERATOR on Sep 25, 2012, 2:24 PM
    12. Better today - Chaz Spaulding on Sep 25, 2012, 5:33 PM
    13. South Africa too. - Stephen Tegner on Sep 26, 2012, 10:08 AM
     
  34. For those planning to attend Joe Farina's Hands-On Diorama Painting Workshop at AMPSEast View Thread - Neil Stokes on Sep 23, 2012, 4:30 PM
    1. Re: For those planning to attend Joe Farina's Hands-On Diorama Painting Workshop at AMPSEast - Pat Mooney on Sep 24, 2012, 2:58 PM
    2. Taping the Workshop - Neil Stokes on Sep 24, 2012, 3:35 PM
     
  35. Who is going to Huntsville, AL IPMS Show next week? View Thread - David Farris on Sep 23, 2012, 3:32 PM
  36.  
  37. Best tool for Cutting plastic stock & Rod View Thread - John Franklin on Sep 22, 2012, 9:50 AM
    1. I think you have it - roy chow on Sep 22, 2012, 11:15 AM
    2. I have the same problem - Mark Aldrich on Sep 23, 2012, 9:13 AM
      1. The cutting edges of knives, razors, etc.,,, - Joseph R. Zrodlowski on Sep 23, 2012, 11:24 AM
    3. Tips for the Chopper (and True Sander) - Kurt Laughlin on Sep 23, 2012, 12:02 PM
      1. Excellent tips, Kurt - Chaz Spaulding on Sep 23, 2012, 2:06 PM
        1. Often needed - Kurt Laughlin on Sep 24, 2012, 8:04 PM
    4. A couple of thoughts - John Tapsell on Sep 23, 2012, 2:11 PM
    5. Thanks to all for your input but wgat about - John Franklin on Sep 24, 2012, 7:47 AM
      1. I've never been happy doing that - Kurt Laughlin on Sep 24, 2012, 7:53 PM
     
  38. Too bad aircraft are in 1/32nd as opposed to 1/35 View Thread - Charles Matthews on Sep 21, 2012, 8:12 PM
    1. there is this one ... - Tony Matteliano on Sep 21, 2012, 8:45 PM
    2. There are many aircraft available in 1/35th scale... - Saul Garcia on Sep 21, 2012, 8:48 PM
      1. Re: There are many aircraft available in 1/35th scale... - Darren Gawle on Sep 22, 2012, 3:02 AM
        1. Re: There are many aircraft available in 1/35th scale... - Alex Dutt on Sep 22, 2012, 4:30 AM
          1. Re: There are many aircraft available in 1/35th scale... - Henri-Pierre Mas on Sep 22, 2012, 6:24 AM
            1. RE: There are many aircraft available in 1/35th scale - Roderick Bell on Sep 22, 2012, 10:19 AM
    3. Re: Too bad aircraft are in 1/32nd as opposed to 1/35 - Aidrian Bridgeman-Sutton on Sep 22, 2012, 4:24 PM
      1. Scales - Chris Grove on Sep 22, 2012, 4:37 PM
      2. Thanks guys - what a great kit - Charles Matthews on Sep 23, 2012, 2:15 PM
        1. Shot down Bf 109 and I-16 were also made in resin... - Saul Garcia on Sep 23, 2012, 10:18 PM
     
  39. anybody rec'd their copy of Tank Art yet?? View Thread - Carter Latham on Sep 21, 2012, 2:19 PM
    1. His website says "shipping approx. 1st part of Oct 2012" - Ken Abrams on Sep 21, 2012, 3:16 PM
      1. like I said I've been guilty - Carter Latham on Sep 21, 2012, 3:34 PM
        1. Est. shipping dates - Michael Rinaldi on Sep 26, 2012, 2:18 AM
     
  40. Issuing applying Archer Transfers View Thread - Scott Dimmick on Sep 21, 2012, 8:10 AM
    1. Hard to tell - James Guld on Sep 21, 2012, 10:06 AM
    2. Try using - Joseph R. Zrodlowski on Sep 21, 2012, 10:09 AM
      1. Try a pencil - Owen R Auer on Sep 21, 2012, 11:29 AM
    3. Archer Transfers - Eric Solomonson on Sep 21, 2012, 2:11 PM
    4. Re: Issuing applying Archer Transfers - Ken Abrams on Sep 21, 2012, 3:18 PM
    5. Bad sheet - Woody Vondracek on Sep 22, 2012, 8:42 AM
      1. WoW that's.... - Cpt. C. Sosebee, USA (ret) on Sep 23, 2012, 4:07 AM
      2. This is Customer Service .... - Brent Watterson on Sep 23, 2012, 5:51 AM
      3. Ordered replacements - Scott Dimmick on Sep 23, 2012, 7:43 AM
     
  41. NordicCon 2012, Saturday, Sept 29, Plymouth, MN View Thread - Tim Streeter on Sep 20, 2012, 11:17 PM
  42.  
  43. Who's going to the IPMS Nationals? View Thread - Chris Meddings on Sep 20, 2012, 10:58 PM
    1. Me! - Andy King on Sep 21, 2012, 9:52 AM
      1. Re: Me! - Chris Meddings on Sep 22, 2012, 6:37 AM
    2. Should be there (you mean the one in Telford, yes?) - Robert Lockie on Sep 21, 2012, 3:00 PM
      1. Re: Should be there (you mean the one in Telford, yes?) - Chris Meddings on Sep 21, 2012, 10:40 PM
    3. Wanted to go but had to abandon the idea because hotels are full - Marcel Kolsteeg on Sep 21, 2012, 5:49 PM
      1. I had that trouble - Chris Meddings on Sep 21, 2012, 10:43 PM
        1. Re: I had that trouble - Marcel Kolsteeg on Sep 22, 2012, 3:11 AM
        2. Not if you know your way round Telford you don't :) - tim roberts on Sep 23, 2012, 6:44 PM
          1. please share - Chris Meddings on Sep 23, 2012, 9:22 PM
    4. im there - malc ireson on Sep 22, 2012, 12:59 PM
      1. Re: im there - Chris Meddings on Sep 22, 2012, 11:40 PM
    5. i will be - ossie Orsbourn on Sep 23, 2012, 6:04 AM
      1. definitely Ossie - Chris Meddings on Sep 23, 2012, 11:28 AM
    6. Telford - George Moore on Sep 24, 2012, 5:23 AM
     
  44. AFVs meet Davey Jones' Locker! View Thread - Marcus Nicholls on Sep 20, 2012, 7:12 AM
    1. Considering they're designed to float... - Roy Stevens on Sep 20, 2012, 8:46 AM
      1. Not very hard to get a Bucket to sink - Alastair Bowie on Sep 21, 2012, 12:10 AM
    2. Leads me to this bad joke - Rob Morales on Sep 20, 2012, 9:33 AM
    3. Rusting metal - Owen R Auer on Sep 20, 2012, 11:31 AM
      1. Re: Rusting metal - Joseph R. Zrodlowski on Sep 20, 2012, 12:08 PM
        1. But that doesn't answer - Owen R Auer on Sep 20, 2012, 12:54 PM
          1. Re: But that doesn't answer - Joseph R. Zrodlowski on Sep 20, 2012, 1:07 PM
          2. considering this type of thing is done pretty often... - Mike Moore on Sep 20, 2012, 1:08 PM
            1. The carrier was the.... - Joseph R. Zrodlowski on Sep 20, 2012, 1:19 PM
              1. USS America - Owen R Auer on Sep 21, 2012, 11:30 AM
      2. Re: Rusting metal - Rob Gronovius on Sep 20, 2012, 2:20 PM
        1. Yeah, I mentioned that, Rob - Joseph R. Zrodlowski on Sep 20, 2012, 4:15 PM
          1. Re: Yeah, I mentioned that, Rob - Rob Gronovius on Sep 20, 2012, 6:20 PM
      3. iron and rust also occur naturally nt - david nickels on Sep 20, 2012, 2:30 PM
        1. So does water vapour (n/t) - Darren Gawle on Sep 21, 2012, 3:11 AM
     
  45. KitMeet 1.2, just one month for the great weekend!!! View Thread - Javier de Luelmo - Diesel on Sep 20, 2012, 6:47 AM
  46.  
  47. Model Show in South Wales View Thread - Dennis Lunn on Sep 20, 2012, 3:58 AM
  48.  
  49. Badger Airbrush Customer Service View Thread - Jerry Stokes on Sep 19, 2012, 9:33 PM
    1. Likewise - Kurt Laughlin on Sep 19, 2012, 10:56 PM
    2. Second that - Bruton,Dave on Sep 20, 2012, 9:11 AM
     
  50. TV alert tonight , 9/8/12, in USA....Discovery Chann.... View Thread - Mike Riedeman on Sep 19, 2012, 6:50 PM
    1. The end - Owen R Auer on Sep 19, 2012, 9:00 PM
    2. Finally a watchable one - Rob Morales on Sep 20, 2012, 9:37 AM
     
  51. Scale Model Challenge 2012 update View Thread - Robert Crombeecke on Sep 19, 2012, 7:08 AM
    1. just one question - Roman Volchenkov on Sep 19, 2012, 7:33 AM
      1. Facebook page - Robert Crombeecke on Sep 19, 2012, 7:51 AM
        1. I know that one - Roman Volchenkov on Sep 19, 2012, 7:54 AM
          1. Coffee? N/T - Jeroen Visschers on Sep 22, 2012, 1:07 PM
     
  52. Chris Jerrett Modeling View Thread - Chris Jerrett on Sep 19, 2012, 6:59 AM
    1. yep, following it since Spring. - Roman Volchenkov on Sep 19, 2012, 7:31 AM
     
  53. Anyone Coming to the London Show? View Thread - Scott Taylor on Sep 19, 2012, 12:11 AM
    1. A bunch from T.O. will be there - Chuck Rothman on Sep 20, 2012, 8:02 AM
      1. Thanks - Scott Taylor on Sep 21, 2012, 10:30 AM
     
  54. I do not understand .. View Thread - emanuel morales (Zeke) on Sep 18, 2012, 1:43 PM
    1. I'm having trouble understanding as well - Ken Abrams on Sep 18, 2012, 2:36 PM
      1. I think his contention is that the model in question... - Mike Roof on Sep 18, 2012, 3:16 PM
        1. Right - Ken Abrams on Sep 18, 2012, 3:35 PM
      2. Ken, - Roman Volchenkov on Sep 18, 2012, 4:01 PM
        1. Thanks Roman - Ken Abrams on Sep 18, 2012, 4:17 PM
      3. Ken, you are correct - Rob Gronovius on Sep 18, 2012, 4:49 PM
        1. Thanks Rob - Ken Abrams on Sep 18, 2012, 5:17 PM
      4. it sounds wierd... - Frank Michaels on Sep 19, 2012, 8:51 AM
    2. degrees - D. McKeever on Sep 18, 2012, 3:37 PM
    3. I thought - Roman Volchenkov on Sep 18, 2012, 4:00 PM
      1. Judging - Erik Ahlström on Sep 18, 2012, 4:40 PM
      2. I dont have interested in your medal Roman.. - emanuel morales (Zeke) on Sep 18, 2012, 6:20 PM
        1. I know what you mean. - Roman Volchenkov on Sep 18, 2012, 6:37 PM
          1. I dont feel bad, is logical your side. - emanuel morales (Zeke) on Sep 18, 2012, 6:53 PM
    4. judges can not be considered experts in everything... - Aaron Smischney on Sep 18, 2012, 4:35 PM
    5. It is a contentious subject. - Paul Roberts on Sep 18, 2012, 4:38 PM
      1. thanks for your explanation. - emanuel morales (Zeke) on Sep 18, 2012, 6:41 PM
      2. Accuracy matters...sometimes - Frank V. De Sisto on Sep 18, 2012, 6:44 PM
        1. The problem with judging for Accuracy - Sean Lynch on Sep 19, 2012, 1:22 AM
          1. "Toddlers & Tiaras" for modelers - Joseph R. Zrodlowski on Sep 19, 2012, 9:18 PM
    6. Re: I do not understand .. - Jamie Haggo on Sep 19, 2012, 2:47 AM
    7. Re: I do not understand .. - Neil Lyall on Sep 19, 2012, 4:05 AM
      1. We live in an imperfect world - Rob Gronovius on Sep 19, 2012, 7:56 AM
        1. Re: We live in an imperfect world - Neil Lyall on Sep 19, 2012, 7:11 PM
      2. I would hardly call that a "risk" - Kurt Laughlin on Sep 19, 2012, 7:03 PM
        1. Re: I would hardly call that a "risk" - Neil Lyall on Sep 19, 2012, 7:51 PM
    8. Give up the hobby... - Rob Ferreira on Sep 24, 2012, 2:29 PM
      1. Re: Give up the hobby... - Chris Meddings on Sep 26, 2012, 10:57 PM
     
  55. MR Models? View Thread - Anthony Ryan on Sep 18, 2012, 10:20 AM
    1. holiday - Ian Howes on Sep 19, 2012, 2:09 AM
     
  56. going to Chicago on Friday View Thread - steve faxon on Sep 17, 2012, 10:20 PM
    1. You are a brave man to take in a Cub game this year..... - Mike Riedeman on Sep 18, 2012, 7:37 AM
    2. Chicago Stuff... - Patrick Keenan on Sep 18, 2012, 7:45 AM
    3. Toy Soldier Show... - gary binder on Sep 18, 2012, 9:15 AM
      1. Woodfield Mall... oohhhh, that will leave a mark - John Charvat on Sep 18, 2012, 1:02 PM
        1. Wow John, by the tone of your post it seems like you're Jones'n for some - Patrick Keenan on Sep 19, 2012, 8:15 AM
    4. Chicago - Dave Lesko on Sep 18, 2012, 7:41 PM
     
  57. M&MODELS NEW WEBSITE View Thread - M&Models on Sep 17, 2012, 4:46 PM
    1. About time you two ! - Doug Kinder on Sep 17, 2012, 5:18 PM
    2. Just ordered the other day and got it today! - Ryan Spindell on Sep 20, 2012, 7:25 PM
     
  58. Stories of Mail Order, part 19,283 View Thread - Pat Stansell on Sep 17, 2012, 4:34 PM
    1. Don't you know - Owen R Auer on Sep 17, 2012, 10:40 PM
      1. Eh, in some ways that's better - Kurt Laughlin on Sep 18, 2012, 6:37 AM
     
  59. Highlighted words View Thread - Owen R Auer on Sep 17, 2012, 1:37 PM
    1. You picked up some Spyware - Adam Kuller on Sep 20, 2012, 12:33 AM
      1. Yontoo - Owen R Auer on Sep 20, 2012, 2:00 AM
     
  60. twelve cheers to panda plastics! View Thread - Aaron Smischney on Sep 17, 2012, 11:20 AM
  61.  
 << Prev 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44   Next >> 

Visitors in this forum in the last 10 minutes: 10 Visitors
10 guests


Terms and Conditions of Use
Report abuse