Home > Discussion Groups > General

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement


General AFV Modelling Discussion Group

Hosted by Al Bowie and Brett Green, the General AFV Modelling discussion group covers any general military modelling topic including industry news and announcements.

Not logged in | Login | Create AccountSearch    Chat!    Home    Post Message
  1. Invitation to Modelling show in Military Museum in Vienna on 11/12th march 2017 View Thread - Robert Kru on Feb 7, 2017, 2:36 PM
  2.  
  3. Another japanese site with kit instructions View Thread - Nacho Roces on Feb 5, 2017, 1:32 PM
    1. Thanks I browsed for hours. - Stephen Tegner on Feb 8, 2017, 10:49 AM
     
  4. Problems at Lucky Model???? View Thread - Kevin J. McNichols on Feb 4, 2017, 11:47 AM
    1. Maybe Chinese New Year stuff ? - David Nickels on Feb 4, 2017, 3:53 PM
    2. Lucky Model - Peter Smith on Feb 4, 2017, 5:38 PM
    3. Another long term shopping noticing the changes - Aaron Hutson on Feb 6, 2017, 9:13 AM
      1. GST..... - Jon Feenstra on Feb 6, 2017, 11:19 AM
    4. Lucky Model - John Hellinikakis on Feb 6, 2017, 2:22 PM
    5. A Bit slower than normal - Al Bowie on Feb 7, 2017, 6:35 PM
     
  5. Customer Service. View Thread - Anders Thim on Feb 4, 2017, 2:04 AM
    1. Thank you - Gert du Preez on Feb 5, 2017, 2:46 PM
      1. Re: Thank you. - Anders Thim on Feb 5, 2017, 10:09 PM
     
  6. Old Dominion Open Model Show/Contest 2-25-17 View Thread - Bob Walls on Feb 3, 2017, 11:46 AM
  7.  
  8. AFV Magazine View Thread - Matthew Farrer on Feb 2, 2017, 3:24 PM
    1. Re: AFV Magazine - David Parker on Feb 2, 2017, 4:43 PM
      1. Same results - Matthew Farrer on Feb 6, 2017, 4:00 PM
     
  9. AMPS web site View Thread - Eric on Jan 31, 2017, 11:06 PM
    1. I too got a 404 error - Mike Fuller on Feb 1, 2017, 4:41 AM
    2. Re: New AMPS Homepage - Chuck Willis on Feb 1, 2017, 7:02 AM
      1. Address - Chris Camfield on Feb 1, 2017, 7:45 AM
      2. Best thing about the site - David Schemel on Feb 1, 2017, 12:10 PM
     
  10. Hobby Models LLC - Stay Away - Stay Far Away View Thread - Michael Baker on Jan 31, 2017, 10:54 PM
    1. Dragon IDF M3 - Peter Smith on Feb 1, 2017, 8:02 PM
      1. The kit was released in January - David Nickels on Feb 2, 2017, 5:17 PM
    2. Panda Plastics... - Frank Micheals on Feb 2, 2017, 10:08 AM
     
  11. Azimut Productions View Thread - Mike Carroll on Jan 31, 2017, 11:08 AM
    1. Azimut stock - Pawel "Vodnik" Krupowicz on Jan 31, 2017, 11:35 AM
      1. Got Lucky - Mike Carroll on Jan 31, 2017, 8:36 PM
        1. Once again, Azmit - Cliff Leverette on Feb 13, 2017, 5:50 PM
     
  12. RAF Cosford Model Show update - April 2nd View Thread - Andrew Tomlinson on Jan 30, 2017, 4:38 PM
  13.  
  14. Thin cutting saw View Thread - Herve Charbonneau on Jan 28, 2017, 2:52 PM
    1. JLC razor saw - Andrew Lang on Jan 28, 2017, 3:29 PM
    2. As Andrew noted the JLC blades are great. They mic out . . . - Tom Morgan on Jan 28, 2017, 10:47 PM
    3. CMK handle and blades - Jeffry Fontaine on Jan 29, 2017, 5:16 PM
    4. Thanks guys! - Herve Charbonneau on Jan 30, 2017, 12:15 AM
    5. Vote for the JLC saw - Paul Roberts on Jan 30, 2017, 11:53 AM
     
  15. PMMS View Thread - Brad Belsheim on Jan 27, 2017, 6:37 PM
    1. Yes, was listed here... - Mike Fuller on Jan 28, 2017, 12:11 PM
      1. Darn ipads - Brad Belsheim on Jan 28, 2017, 4:28 PM
    2. Link - Steven Brown on Jan 29, 2017, 9:44 AM
    3. Great news - Jose del Cueto on Jan 30, 2017, 6:04 PM
      1. Tel`s Back... - Stirling Lowery on Jan 31, 2017, 4:57 PM
     
  16. War And Peace moves back to Beltring View Thread - Andrew Tomlinson on Jan 27, 2017, 5:27 PM
  17.  
  18. Airbrushing Seminar by Chris Mrosko at AMPS ATL Show View Thread - Dave Black on Jan 27, 2017, 1:07 PM
  19.  
  20. Swap Meet in San Diego Ca. View Thread - rick emrick on Jan 27, 2017, 12:26 PM
  21.  
  22. I'm still not getting notifications (where requested) on ML posts to my email account View Thread - Andrew Tomlinson on Jan 23, 2017, 4:10 PM
    1. I didn't think you could ?? nt - David Nickels on Jan 23, 2017, 4:17 PM
    2. Yes - Paul Krylowski on Jan 23, 2017, 8:47 PM
    3. You may "nought" have heard but they answered. - Kurt Laughlin on Jan 23, 2017, 9:10 PM
      1. nought - Andrew Deeley on Jan 24, 2017, 7:38 AM
        1. I was making a pun, of sorts - Kurt Laughlin on Jan 24, 2017, 11:51 AM
          1. Or even nowt - Andrew deeley on Jan 24, 2017, 12:25 PM
          2. Re: I was making a pun, of sorts - Terry Ashley on Jan 24, 2017, 5:05 PM
            1. Hay Terry - Kylie newton on Jan 25, 2017, 12:07 AM
      2. Ah, I see... but when I did go back to check it I found no response... - Andrew Tomlinson on Jan 25, 2017, 6:21 PM
    4. Funny, I could swear I answered your enquiry on the post - Al Bowie on Jan 24, 2017, 6:16 PM
      1. You did. - Kurt Laughlin on Jan 24, 2017, 8:06 PM
     
  23. Asuka Onine Modelshop. View Thread - John Bryce on Jan 21, 2017, 7:21 AM
    1. Same problem - Robert Price on Jan 21, 2017, 11:04 AM
    2. Payments and deliveries - Peter Smith on Jan 21, 2017, 6:01 PM
    3. Re: Asuka Onine Modelshop. - John Bryce on Jan 22, 2017, 7:34 AM
      1. Asuka redress - Peter Smith on Jan 22, 2017, 11:48 AM
        1. Thanks for that Pete. n/t. - John Bryce on Jan 22, 2017, 2:38 PM
    4. Ever since the changeover... - Herve Charbonneau on Jan 23, 2017, 10:31 AM
    5. This morning, got a reply! - John Bryce on Jan 26, 2017, 4:13 AM
     
  24. Facebook View Thread - Mirko Bayerl on Jan 21, 2017, 5:01 AM
    1. I'm still here too! - John Prigent on Jan 21, 2017, 5:06 AM
      1. Hi John - Mirko Bayerl on Jan 21, 2017, 5:26 AM
        1. I know what you mean, Mirko - John Prigent on Jan 21, 2017, 11:22 AM
    2. Death of a Salesman - Matt Nethery on Jan 21, 2017, 5:52 AM
    3. Re: Facebook - Olivier Carneau on Jan 21, 2017, 6:33 AM
    4. They both offer a lot but one nice thing with FB - David Nickels on Jan 21, 2017, 9:13 AM
    5. Re: Facebook - Andrew deeley on Jan 21, 2017, 9:34 AM
    6. Re: Facebook - Ken Abrams on Jan 21, 2017, 9:58 AM
      1. Mr Abrams !! - Mirko Bayerl on Jan 22, 2017, 4:40 AM
        1. Re: Mr Abrams !! - Ken Abrams on Jan 22, 2017, 6:19 AM
    7. The problem of Facebook - Steven Brown on Jan 21, 2017, 10:00 AM
    8. Not either/or - Steve Zaloga on Jan 21, 2017, 11:17 AM
      1. But don't you find, Steve... - John Prigent on Jan 21, 2017, 11:31 AM
        1. Re: But don't you find, Steve... - Andrew Deeley on Jan 21, 2017, 2:14 PM
          1. Evrything changes, everything stays the same........... - Michael Kenny on Jan 21, 2017, 4:19 PM
            1. Re: Evrything changes, everything stays the same........... - Andrew Deeley on Jan 21, 2017, 4:45 PM
            2. Private/Closed Facebook groups Aren't as evil as you think they are... - Scott Dimmick on Jan 23, 2017, 10:12 AM
            3. Re: Evrything changes, everything stays the same........... - Neil Kirby on Jan 30, 2017, 4:54 AM
        2. About the same - Steve Zaloga on Jan 21, 2017, 4:38 PM
    9. Facebook - Dave Foster on Jan 21, 2017, 4:04 PM
    10. Forums are becoming like... - Frank Michaels on Jan 22, 2017, 9:18 AM
    11. Don't take this the wrong way (re this forum) - Chris Camfield on Jan 22, 2017, 9:25 AM
      1. The bad thing is: N54 does not come cheap. n/m - JMehner on Jan 22, 2017, 4:36 PM
    12. ;) - Roman on Jan 22, 2017, 11:26 AM
      1. Missing Lynx / Facebook - Stirling Lowery on Jan 22, 2017, 12:43 PM
    13. Supplement, not replacement - Al Bowie on Jan 22, 2017, 2:50 PM
    14. my reasons for not being on FB... - Kevin Tong on Jan 22, 2017, 4:52 PM
      1. You're points are fairly accurate Kevin... - Dan Capuano on Jan 23, 2017, 2:48 PM
    15. image size - Bill Apple on Jan 22, 2017, 10:51 PM
      1. Facebook - Thanks !! - Mirko Bayerl on Jan 23, 2017, 5:36 AM
        1. FB - Mikko Heikkinen on Jan 23, 2017, 6:49 PM
    16. Braille forum - Bas Slaats on Jan 23, 2017, 11:06 AM
      1. A lot to like... - Mirko Bayerl on Jan 23, 2017, 12:06 PM
      2. so is Braille scale forum - - Kevin Tong on Jan 23, 2017, 2:42 PM
        1. check it out ;) - Bas Slaats on Jan 23, 2017, 4:33 PM
      3. The ML Braille scale forum is all encompassing - Rob Gronovius on Jan 24, 2017, 1:56 AM
        1. Very Good - then I will start posting on BS forum and not CC! n/t - Kevin Tong on Jan 24, 2017, 8:33 AM
    17. Hey buddy ! I feel your pain. But I think both - jerry rutman on Jan 23, 2017, 12:07 PM
    18. Re: Facebook - Chris Jerrett on Jan 23, 2017, 3:22 PM
      1. I quite like facebook - Tim Roberts on Jan 26, 2017, 9:37 PM
    19. Re: Facebook - M. Gallagher on Jan 27, 2017, 12:57 AM
      1. Improvements to ML - Frank Blanton on Jan 27, 2017, 1:20 PM
     
  25. Perth Military Modelling Site View Thread - Mike Carroll on Jan 20, 2017, 9:54 AM
    1. YES!!!!! - Ed Keene on Jan 20, 2017, 10:45 PM
     
  26. Jeff McKaughan, AMPS founder, passed on View Thread - Steve Zaloga on Jan 19, 2017, 1:02 PM
    1. Re: Jeff McKaughan, AMPS founder, passed on - Nick Morgan on Jan 19, 2017, 6:39 PM
    2. Sad News Indeed - Jon Feenstra on Jan 20, 2017, 12:19 AM
    3. Terrible news - Gert du Preez on Jan 20, 2017, 3:19 AM
    4. I'm sorry to hear that - Kurt Laughlin on Jan 20, 2017, 1:13 PM
    5. Sad news - Chris Weeks on Jan 21, 2017, 8:57 AM
      1. Jeff McKaughans passing - Frank Blanton on Jan 24, 2017, 7:15 AM
     
  27. Overcoating decals before using AMMO weathering products View Thread - Pete Beck on Jan 19, 2017, 1:29 AM
    1. test piece... - Frank Micheals on Jan 19, 2017, 7:48 AM
    2. Re: Overcoating decals before using AMMO weathering products - Ken Abrams on Jan 21, 2017, 10:52 AM
     
  28. AMPS 2017 Show Update - Vendors and Seminars View Thread - Chuck Willis on Jan 15, 2017, 8:36 AM
    1. Which Hobby Fan? - Christophe Jacquemont on Jan 15, 2017, 2:33 PM
      1. Purdue... - Frank Michaels on Jan 16, 2017, 7:53 AM
        1. Thanks Christophe - Michael Bishop on Jan 16, 2017, 2:52 PM
      2. HobbyFan - Miike Carroll on Jan 16, 2017, 5:31 PM
        1. You are correct, Mike - Chuck Aleshire on Jan 16, 2017, 6:06 PM
    2. Neil Stokes' seminar - Nick Morgan on Jan 18, 2017, 9:44 PM
      1. RE: Neil Stokes' Seminar - Chuck Willis on Jan 19, 2017, 6:48 AM
      2. My seminar... - Neil Stokes on Jan 29, 2017, 7:09 PM
     
  29. Tanks A Lot Tour View Thread - Joe Bevans on Jan 13, 2017, 12:14 PM
    1. Interested - Chris Graeter on Jan 15, 2017, 1:23 PM
      1. E mail me - Joe Bevans on Jan 15, 2017, 7:30 PM
     
  30. Hobby shops in Moscow? View Thread - Patricio Delfosse on Jan 12, 2017, 7:23 PM
    1. Olympic Sports Complex - Steve Zaloga on Jan 15, 2017, 11:41 AM
      1. Thanks Steve.. - Patricio Delfosse on Jan 15, 2017, 9:27 PM
     
  31. France and Belgium Battlefield Tour this July View Thread - Chris Evans on Jan 11, 2017, 11:35 AM
    1. Would have loved to go... - Paul Roberts on Jan 12, 2017, 10:00 AM
     
  32. Lynn Sangster has passed away View Thread - Andrew deeley on Jan 10, 2017, 8:19 AM
    1. Very Sad... - Stirling Lowery on Jan 10, 2017, 7:44 PM
    2. Sad...I saw on Facebook that Chris Mrosko died, any - Kenneth Daigle on Jan 11, 2017, 1:44 PM
      1. Not as of 7:50AM this morning - roy chow on Jan 12, 2017, 8:45 AM
        1. Allelujah, we have a resurrection! :-) (NT) - Christophe Jacquemont on Jan 12, 2017, 11:20 AM
      2. re: Sad...I saw... - Wayne Killeen on Jan 12, 2017, 12:47 PM
        1. You're curious how things like this get started? - Gary Owsley on Jan 13, 2017, 4:20 AM
      3. Guess I talked to a ghost on the phone today. n/t - Gary Owsley on Jan 13, 2017, 2:28 PM
     
  33. Baluard models of Spain.. Is it OOB ?? View Thread - Tony lane on Jan 8, 2017, 9:34 PM
  34.  
  35. US source for thinner plates of balsa foam? View Thread - Christophe Jacquemont on Jan 7, 2017, 12:16 PM
    1. Balsa foam - Matt Leese on Jan 9, 2017, 6:58 AM
    2. another possibility - Matt Leese on Jan 9, 2017, 2:15 PM
      1. Thank you Matt! - Christophe Jacquemont on Jan 10, 2017, 3:10 PM
     
  36. Dragon 1/35 diecast (display model) 61001 TIGER I Tunisia DAK Initial Production View Thread - Christophe Jacquemont on Jan 5, 2017, 6:15 PM
    1. eBay - David Nickels on Jan 5, 2017, 6:52 PM
      1. Thanks David. - Christophe Jacquemont on Jan 7, 2017, 12:13 PM
     
  37. Poll - Modelling Magazine Content ? View Thread - Stirling Lowery on Jan 5, 2017, 9:01 AM
    1. Subject matter - Paul Roberts on Jan 5, 2017, 12:39 PM
    2. military vehicles, aircraft or ships ? - Andrew deeley on Jan 5, 2017, 2:23 PM
      1. military vehicles, aircraft or ships ? - Stirling Lowery on Jan 5, 2017, 3:22 PM
        1. why do i buy a magazine? - pat mc cumiskey on Jan 5, 2017, 5:14 PM
    3. Panzer Aces... - Frank Michaels on Jan 6, 2017, 7:18 AM
    4. Thoughts - Steven Brown on Jan 6, 2017, 8:08 AM
      1. Magazine Content - F Blanton on Jan 6, 2017, 6:23 PM
    5. Bit of Both - Al Bowie on Jan 7, 2017, 10:43 PM
     
  38. MXpression Free Magazine View Thread - John Steinman on Jan 4, 2017, 6:19 PM
  39.  
  40. Merit International M19 tank transporter? View Thread - Jonathan Stetson on Jan 4, 2017, 1:09 PM
    1. I have built it - Shane Gowan on Jan 4, 2017, 2:17 PM
      1. Merit Int. M-19 - F Blanton on Jan 6, 2017, 6:16 PM
    2. The Merit kits are basically rebranded - David Nickels on Jan 7, 2017, 8:57 AM
     
  41. Academy vs. AFV Club M18 Hellcat View Thread - Jonathan Stetson on Jan 3, 2017, 9:38 PM
    1. A couple of references for you... - kylie newton on Jan 4, 2017, 3:08 AM
    2. discussed in the Allied forum - David Nickels on Jan 4, 2017, 7:40 PM
    3. Despite its issues... - Herve Charbonneau on Jan 5, 2017, 8:33 AM
      1. Aftermarket upper hull? - F Blanton on Jan 6, 2017, 6:33 PM
        1. You really need a whole new kit - David Nickels on Jan 7, 2017, 8:58 AM
     
  42. Blitzscales is ready again with new gifts View Thread - Federico Collada on Jan 2, 2017, 1:33 AM
    1. Very kind and many thanks but the link is dead. - Stephen Tegner on Jan 2, 2017, 10:19 AM
      1. Works fine for me... - Jon Feenstra on Jan 2, 2017, 10:35 AM
      2. Use the www.blitzscales.com-address, not the active link. n/m - JMehner on Jan 2, 2017, 1:22 PM
        1. Tried that too, still doesn't work. - Stephen Tegner on Jan 2, 2017, 2:07 PM
        2. Links - Chris Camfield on Jan 2, 2017, 2:42 PM
    2. Ok, got it now thanks for the help. - Stephen Tegner on Jan 3, 2017, 11:11 AM
    3. Thanks! - Chris Camfield on Jan 4, 2017, 10:17 AM
    4. Excellent! - Ken Holland on Jan 5, 2017, 8:14 AM
      1. getting the following: - Matt Leese on Jan 5, 2017, 11:06 AM
    5. Thank you guys - Federico Collada on Jan 8, 2017, 3:05 AM
     
  43. n/t View Thread - phil stutcinskas on Dec 31, 2016, 12:38 PM
  44.  
  45. Armorama Ad Blocker Problem View Thread - Chris Ekstrom on Dec 30, 2016, 4:57 PM
    1. Scroll down, little bit lower on this page... ;-) - Christophe Jacquemont on Dec 30, 2016, 5:19 PM
    2. Did you clear your cache and possibly cookies? n/m - JMehner on Dec 30, 2016, 5:39 PM
      1. I have... - Chris Ekstrom on Dec 30, 2016, 9:29 PM
        1. So you didn't scroll down? - Christophe Jacquemont on Dec 31, 2016, 10:47 AM
          1. Oh, I saw it... - Chris Ekstrom on Dec 31, 2016, 8:12 PM
    3. In my case I had to unblock in Kapersky toolbar - Robert Kru on Dec 31, 2016, 8:34 AM
     
  46. Arms Corps Models View Thread - John Bryce on Dec 29, 2016, 11:37 AM
    1. Re: Arms Corps Models - Greg Neal on Dec 29, 2016, 5:40 PM
      1. Re: Arms Corps Models - John Bryce on Dec 30, 2016, 4:48 AM
        1. Centaur 1/48 - Andrew deeley on Dec 30, 2016, 6:23 AM
          1. Re: Centaur 1/48 - John Bryce on Dec 30, 2016, 9:53 AM
            1. Re: Centaur 1/48 - Andrew deeley on Dec 30, 2016, 1:19 PM
     
  47. Anyone have issues with Hobby Models in PA? View Thread - Michael Baker on Dec 26, 2016, 4:06 PM
    1. Not them but - David Nickels on Dec 27, 2016, 8:50 AM
      1. Not them but - Lester Senn on Dec 29, 2016, 12:42 PM
        1. i didn't buy it - David Nickels on Dec 30, 2016, 9:02 AM
     
  48. Miniart vs. Mirror Models dozers View Thread - Jonathan Stetson on Dec 26, 2016, 2:02 PM
    1. Re: Miniart vs. Mirror Models dozers - Dave Coyne on Dec 27, 2016, 8:54 AM
      1. Very helpful, thanks. Very nice model as well. - Jonathan Stetson on Dec 27, 2016, 8:06 PM
     
  49. Modelling of today - reflections View Thread - Mirko Bayerl on Dec 26, 2016, 5:56 AM
    1. Trends - Andrew Deeley on Dec 26, 2016, 7:49 AM
      1. Zaloga... - Frank Michaels on Dec 26, 2016, 10:00 AM
        1. Zaloga - Mirko Bayerl on Dec 26, 2016, 5:09 PM
      2. Thanks Andrew - Mirko Bayerl on Dec 26, 2016, 5:41 PM
    2. 3D Printing and Realism vs. Impressionism - Mike Roof on Dec 26, 2016, 10:41 AM
      1. Perfect.. - Mirko Bayerl on Dec 26, 2016, 5:49 PM
        1. Modeling as an Art Form... - Mike Roof on Dec 27, 2016, 9:42 AM
    3. A Blank Canvas.... - Brian N Stanley on Dec 27, 2016, 1:44 AM
    4. Trends...who knows - Steven Brown on Dec 27, 2016, 9:52 AM
      1. The Most Influential 1/35 Scale Modeller..... - Stirling Lowery on Dec 28, 2016, 11:39 AM
        1. Verlinden: Most influential modeler of the 1990s - Steve.Zaloga on Dec 28, 2016, 4:18 PM
          1. Face book - Andrew deeley on Dec 28, 2016, 5:59 PM
            1. Facebook postings - Steve Zaloga on Dec 28, 2016, 6:17 PM
              1. Photobucket issues - Michael Humphries on Dec 28, 2016, 11:35 PM
                1. Thanks about Imgur - Steve Zaloga on Dec 29, 2016, 5:48 PM
                  1. You're welcome, sir - Michael Humphries on Dec 29, 2016, 9:14 PM
              2. Thank you n/t - Andrew deeley on Dec 29, 2016, 3:52 AM
          2. Interesting... - Mirko Bayerl on Dec 28, 2016, 6:22 PM
          3. Absolutely.... - Stirling Lowery on Dec 30, 2016, 5:45 AM
          4. Right time right place - Andrew deeley on Dec 30, 2016, 6:37 AM
          5. Verlinden and Letterman with VLS... - Frank Michaels on Dec 30, 2016, 8:00 AM
            1. Re: Verlinden and Letterman with VLS... - Andrew deeley on Dec 30, 2016, 1:13 PM
          6. Trends - Frank Blanton on Dec 30, 2016, 3:37 PM
          7. Re: Verlinden: Most influential modeler of the 1990s - Rob Gronovius on Dec 31, 2016, 10:58 AM
    5. interesting discussion and Hello Mirko. - Phil Stutcinskas on Dec 31, 2016, 12:40 PM
      1. Hi Phil :) - Mirko Bayerl on Jan 1, 2017, 4:49 AM
    6. Maybe light and magic could be the next thing - Nanond Nopparat on Jan 9, 2017, 4:36 AM
    7. Trends and research - David Hoyle on Jan 10, 2017, 7:43 AM
     
  50. Cheaper tickets before 1st Jan for the War and Peace Show View Thread - Andrew Tomlinson on Dec 25, 2016, 12:23 PM
  51.  
  52. A Very Merry Christmas View Thread - Al Bowie on Dec 24, 2016, 6:55 PM
  53.  
  54. Locked out of Armorama View Thread - Dave Coyne on Dec 23, 2016, 11:58 AM
    1. It's OK for me. Literally a minute ago. - Ian Alderman on Dec 23, 2016, 12:05 PM
    2. Re: Locked out of Armorama - Ken Holland on Dec 23, 2016, 1:17 PM
    3. Thats a bit sly - Dave Coyne on Dec 23, 2016, 3:48 PM
    4. Same here - Marc Brandes on Dec 23, 2016, 5:18 PM
    5. Re: Locked out of Armorama - Nick Morgan on Dec 23, 2016, 6:46 PM
    6. Me too in the US - Keith Bickel on Dec 23, 2016, 6:56 PM
      1. Re: Me too in the US - Nick Morgan on Dec 23, 2016, 8:20 PM
    7. They now have a notice on their home page - David Nickels on Dec 23, 2016, 7:17 PM
    8. Blocked in Ohio; bye-bye Armorama n/t - Frank Domalski on Dec 23, 2016, 9:07 PM
    9. No problem at all here in western Canada. n/t - Tom Morgan on Dec 23, 2016, 9:39 PM
    10. Ad blocker - Bill Inglee on Dec 23, 2016, 11:50 PM
      1. In UK, this review of the IBG C30 worked ok for me ! - Andrew Tomlinson on Dec 24, 2016, 3:52 AM
        1. Re: In UK, this review of the IBG C30 worked ok for me ! - Dave Coyne on Dec 24, 2016, 11:48 AM
    11. iPad and no problems - Andrew Deeely on Dec 24, 2016, 5:54 AM
    12. Before we all stampede... - Tom Cromwell on Dec 24, 2016, 4:59 PM
      1. Shouldn't have typed so fast... - Tom Cromwell on Dec 25, 2016, 7:06 AM
        1. I read Jims post too - Dave Coyne on Dec 25, 2016, 8:40 AM
          1. For his own good, Jim should really reconsider his ad policy... - Christophe Jacquemont on Dec 25, 2016, 9:29 AM
            1. Food for thought. *Link* - Christophe Jacquemont on Dec 25, 2016, 9:40 AM
            2. I don't mind most ads - Rob Gronovius on Dec 26, 2016, 1:03 AM
              1. Ads on right... - Tom Cromwell on Dec 26, 2016, 7:45 PM
                1. The two when I looked earlier, Fiat and 3M - Rob Gronovius on Dec 26, 2016, 9:28 PM
          2. Hahahaha... Catch 22 - Keith Bickel on Dec 25, 2016, 9:48 AM
            1. Re: Hahahaha... Catch 22 - Dave Coyne on Dec 25, 2016, 7:07 PM
              1. No... - Keith Bickel on Dec 26, 2016, 12:01 PM
                1. For Chrome - Mike Peplinski on Dec 26, 2016, 4:31 PM
    13. If you google "disable adblock killer"... - Christophe Jacquemont on Dec 25, 2016, 8:30 AM
      1. Worked a treat - Ken Holland on Dec 27, 2016, 5:15 PM
    14. Add a new filter to adblock: - Alexander Sudnikovich on Jan 10, 2017, 3:54 AM
     
  55. AMPS 2017 Show Announcement View Thread - Chuck Willis on Dec 23, 2016, 7:31 AM
  56.  
  57. HobbyEasy website. View Thread - Kent Brazeau on Dec 22, 2016, 7:15 AM
    1. It is reliable and secure. Not the fastest shipping times. - Matt Nethery on Dec 22, 2016, 8:29 AM
    2. Fine vendor - David Nickels on Dec 22, 2016, 8:42 AM
      1. thanks guys. - kent Brazeau on Dec 22, 2016, 8:45 AM
      2. I expect a two week, minimum delivery time when I order from them. - Matt Nethery on Dec 22, 2016, 9:34 AM
        1. That is about the norm from Asia to the US - David Nickels on Dec 22, 2016, 4:32 PM
        2. Re: I expect a two week, minimum delivery time when I order from them. - Andrew Deeley on Dec 23, 2016, 10:06 AM
    3. No real time inventory - Mike Fuller on Dec 22, 2016, 10:36 AM
      1. MENG KT 1/35 Order - Kent Brazeau on Dec 22, 2016, 12:19 PM
        1. One of the best online vendors - Jon Feenstra on Dec 22, 2016, 1:31 PM
          1. well.. - Kent Brazeau on Dec 22, 2016, 2:25 PM
            1. Buy With Confidence..... - Stirling Lowery on Dec 30, 2016, 5:49 AM
     
  58. Soldering Etch Brass View Thread - Martin James on Dec 22, 2016, 5:33 AM
    1. amazon.uk - Matt Nethery on Dec 22, 2016, 8:30 AM
    2. Nokorode ... - Mike Fuller on Dec 22, 2016, 10:39 AM
    3. Solder paste - Chris Grove on Dec 22, 2016, 10:59 AM
    4. Maplins (n/t) - John Harris on Dec 22, 2016, 11:51 AM
      1. Many Thanks - Martin on Dec 22, 2016, 5:26 PM
    5. Re: Soldering Etch Brass - Tom Cockle on Dec 23, 2016, 12:47 PM
      1. Thanks Tom - Martin on Dec 23, 2016, 3:26 PM
    6. Cut the Solder Up into Small Bits - Konrad Schreier on Dec 27, 2016, 11:59 AM
      1. Thanks Konrad - Martin on Dec 27, 2016, 5:28 PM
    7. Re: soldering - Peter Smith on Jan 9, 2017, 8:30 PM
     
  59. What's your experience been with shapeways? Mine has not been great so far. View Thread - Chris Evans on Dec 19, 2016, 3:57 PM
    1. Mine's been v good - Robert Lockie on Dec 19, 2016, 6:38 PM
    2. placed plenty of orders - Niels Henkemans on Dec 19, 2016, 6:47 PM
    3. Shapeways - Jeffry Fontaine on Dec 19, 2016, 7:27 PM
      1. Re: Shapeways - John Bryce on Dec 20, 2016, 4:32 AM
    4. Good service thus far - John Tapsell on Dec 20, 2016, 7:21 AM
    5. 1 out of 2 - Ryan Spindell on Dec 20, 2016, 9:06 AM
    6. Re: What's your experience been with shapeways? Mine has not been great so far. - Tom Cockle on Dec 20, 2016, 11:26 AM
    7. All okay - John Harris on Dec 20, 2016, 12:07 PM
      1. Excellent service - Ian Alderman on Dec 20, 2016, 2:17 PM
        1. First time on the awesome Sherman periscopes - brilliant all round - Andrew Tomlinson on Dec 20, 2016, 3:09 PM
        2. various reasons - Niels Henkemans on Dec 20, 2016, 8:00 PM
    8. Re: What's your experience been with shapeways? Mine has not been great so far. - Andrew Deeley on Dec 20, 2016, 3:06 PM
    9. FWIW: currently 20% discount - Niels Henkemans on Dec 21, 2016, 6:57 AM
      1. A question - Ian Alderman on Dec 22, 2016, 2:22 AM
        1. Hot water should work... - Niels Henkemans on Dec 22, 2016, 10:23 AM
    10. Never had problems - Marwin Albertema on Dec 22, 2016, 8:57 AM
    11. Couldn't print mine - Dave Coyne on Dec 23, 2016, 11:43 AM
      1. Heart - Ian Alderman on Dec 23, 2016, 12:03 PM
        1. Re: Heart - Dave Coyne on Dec 23, 2016, 3:43 PM
     
  60. Dragon Hobbyie e-bay store: experiences? View Thread - Larry Fritz on Dec 19, 2016, 2:19 PM
    1. If you mean Dragon-Hobby - David Nickels on Dec 19, 2016, 4:35 PM
    2. I've used them several times, most recently purchasing the . . . - Tom Morgan on Dec 19, 2016, 4:54 PM
    3. Top notch company! - Dave Utley on Dec 19, 2016, 6:04 PM
    4. Dragon Hobby - Thank you everybody! - Larry Fritz on Dec 19, 2016, 6:44 PM
      1. If they are selling it on Ebay they have to have it in stock - Dave Coyne on Dec 23, 2016, 11:53 AM
        1. No, they can flag it as "currently/temporarily unavailable". n/m - JMehner on Dec 30, 2016, 5:41 PM
     
  61. from Spain...merry christmas View Thread - Luis Pitarch Carrion on Dec 17, 2016, 1:31 PM
    1. Merry Christmas Luis - Stephen J. Pringle on Dec 20, 2016, 10:54 PM
     
  62. Vietnam Gun Emplacement View Thread - Jim Philhower on Dec 16, 2016, 7:55 PM
    1. verlinden did a few - jamie sumner on Dec 17, 2016, 7:09 AM
    2. Re: Vietnam Gun Emplacement - Ken Huck on Dec 17, 2016, 8:23 AM
    3. Ebay - Owen R Auer on Dec 17, 2016, 1:08 PM
    4. Re: Vietnam Gun Emplacement - George Proulx on Dec 17, 2016, 1:23 PM
    5. Rebelkit - Frank Kuhn on Dec 17, 2016, 10:22 PM
    6. Pictures.......... - Dan Rosecrans on Dec 18, 2016, 12:08 PM
      1. Gun Positions - Paul Roberts on Dec 20, 2016, 3:55 PM
     
 << Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30   Next >> 

Visitors in this forum in the last 10 minutes: 8 Visitors
SeanPGilday, 7 guests


Terms and Conditions of Use
Report abuse