Home > Discussion Groups > General

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement


General AFV Modelling Discussion Group

Hosted by Al Bowie and Brett Green, the General AFV Modelling discussion group covers any general military modelling topic including industry news and announcements.

Not logged in | Login | Create AccountSearch    Chat!    Home    Post Message
  1. What are you planning to put on your Diamond T Rogers trailer? View Thread - Geoff Steer on Dec 14, 11:16 AM
    1. An AFV Club Churchill 95mm... at present... - Andrew Tomlinson on Dec 14, 12:05 PM
      1. Some type of Soviet tank - Scott Woodward on Dec 14, 1:11 PM
    2. I'll be doing mine as an IDF rig in 1967... - Greg Buechler on Dec 14, 1:56 PM
      1. LVT 4 - Richard Craig on Dec 14, 3:48 PM
    3. Formations Ram Badger, OP or maybe a Resicast Kangaroo as a Wallaby. n/t - Roy Stevens on Dec 14, 5:39 PM
      1. A tough one.... - Shane Gowan on Dec 17, 3:54 PM
    4. Re: What are you planning to put on your Diamond T Rogers trailer? - Rod Dumouchel on Dec 18, 11:26 AM
     
  2. Great service from Sprue Brothers!!!! View Thread - Geoff Steer on Dec 12, 3:12 PM
    1. Mine showed up today from Sprue Bros. too... - Roy Stevens on Dec 12, 5:26 PM
      1. I started - roy chow on Dec 12, 6:02 PM
        1. Good to know.... - Shane Gowan on Dec 12, 8:26 PM
    2. Always great service.... - Brian N Stanley on Dec 12, 9:42 PM
      1. 20% Off all Armor Sale - Florencio Baca on Dec 13, 6:30 PM
        1. Ah geez, I jumped too soon for the two I bought! - Chris Johnson on Dec 13, 6:41 PM
          1. Come clean Chris... - Geoff Steer on Dec 14, 9:19 AM
            1. Sorry I forgot you're in Canada too Geoff! Chris, you can rest easy. - Roy Stevens on Dec 14, 9:26 AM
            2. If All Goes Well . . . - Chris Johnson on Dec 14, 10:25 AM
              1. Interesting choices... - Geoff Steer on Dec 14, 11:12 AM
        2. Me too! - Greg Buechler on Dec 13, 8:11 PM
          1. Oh good! (not for you though) - Chris Grove on Dec 14, 6:57 AM
      2. Re: Always great service.... - John Wypyszinski on Dec 14, 9:48 AM
     
  3. Armor Plate Press - any UK stockists? View Thread - Andrew James on Dec 11, 7:35 AM
  4.  
  5. HS social studies teacher View Thread - Willaim M. Winkes on Dec 10, 8:15 PM
    1. Whoops, see below - Mike Witous on Dec 10, 9:39 PM
    2. I teach Special Ed., the other thread was too long. - Ed Keene on Dec 11, 9:44 PM
    3. Helicopter Experimental Flight Test Engineer - Mark Hazzard on Dec 12, 7:35 AM
      1. Pizza Boy - John Deering on Dec 12, 12:13 PM
     
  6. What do you guys do for a living? View Thread - Rev Dean J Koler on Dec 9, 8:53 PM
    1. Aircraft mechanic - Eric McClure on Dec 9, 9:47 PM
    2. Senior Supply Sergeant - Brent Sauer on Dec 9, 10:04 PM
    3. Attorney - John Eckhardt on Dec 9, 10:13 PM
    4. Biomedical Equipment Tech - Jim Dodson on Dec 9, 10:19 PM
      1. Me too. - Scott Smith on Dec 10, 7:14 PM
    5. Resin Rat and more! - Christopher Mrosko on Dec 9, 10:30 PM
    6. Retired Security Analyst - Steve Hearn on Dec 9, 10:33 PM
    7. My work............ - Garry Ropchan on Dec 9, 10:50 PM
      1. Coldest temp - Paul Roberts on Dec 13, 2:27 PM
        1. Siberia maybe? ...n/t - Roy Stevens on Dec 14, 9:30 AM
    8. School Teacher.... - Brian N. Stanley on Dec 9, 11:01 PM
    9. well.... - Tony Wilsbacher on Dec 9, 11:13 PM
      1. Howdy - Willaim M. Winkes on Dec 10, 8:01 PM
    10. wow.. - emanuel morales (Zeke) on Dec 9, 11:20 PM
    11. Analytical Chemist - Georg Eyerman on Dec 9, 11:24 PM
    12. Sr. Writer / Asst. Creative Director - Matt Deck on Dec 9, 11:52 PM
    13. What I did. - ted nichols on Dec 10, 1:12 AM
    14. Commercial diver - Andrew Lee on Dec 10, 1:20 AM
    15. Public servant. - Stephen Tegner on Dec 10, 2:15 AM
    16. Me - Beau Minnick on Dec 10, 4:22 AM
      1. Sweet! - Michael Adams on Dec 10, 1:54 PM
    17. Long. Distance trucker - Andre Ellis on Dec 10, 4:54 AM
    18. EMT - Michael McLaughlin on Dec 10, 4:58 AM
    19. prototype machinist... - Sean McAndrews on Dec 10, 6:36 AM
    20. Retired. - John Bryce on Dec 10, 6:50 AM
    21. Machinist - Jim Hockett on Dec 10, 6:51 AM
    22. Model Maker - Michael Bishop on Dec 10, 7:45 AM
    23. Societal parasite - Bruton,Dave on Dec 10, 8:44 AM
    24. Retired Police Officer - Chris Johnson on Dec 10, 8:51 AM
    25. Retired Marine since 1989 - Ken Huck on Dec 10, 8:51 AM
      1. Retired USAF1989 - Mike Rechlicz on Dec 10, 9:01 AM
      2. Retired USN since 2007; Veteran Service Officer - John Wypyszinski on Dec 10, 9:37 AM
    26. IT Project Manager - Matthew Malogorski on Dec 10, 9:33 AM
    27. Ind'l power transmission sales/miniature artist.... n/t - Dan Capuano on Dec 10, 9:54 AM
    28. Re: What do you guys do for a living? - Richard Craig on Dec 10, 10:15 AM
    29. Fantasy author and military historian - Chris Evans on Dec 10, 11:37 AM
      1. Iron Elves - John Tapsell on Dec 10, 1:04 PM
        1. Thanks! - Chris Evans on Dec 10, 1:17 PM
          1. Writing - John Tapsell on Dec 10, 1:29 PM
          2. awesome books - Merrick Johnston on Dec 10, 2:02 PM
            1. Thanks :) - Chris Evans on Dec 10, 3:43 PM
    30. Design Drafter - Matt Leese on Dec 10, 11:42 AM
      1. I'm a Grounds Tech at Kenyoun College - Brock Hopkins III on Dec 10, 11:51 AM
    31. Retired US Army Lieutenant Colonel - Rob Gronovius on Dec 10, 11:44 AM
    32. Professional money loser - Tom Hall on Dec 10, 12:10 PM
    33. Building designer/project manager - Tom Cockle on Dec 10, 12:16 PM
      1. ohh interesting! - emanuel morales (Zeke) on Dec 10, 5:49 PM
    34. e-Discovery Guru - Chuck Rothman on Dec 10, 12:28 PM
    35. Army Artillery Officer - Gino P. Quintiliani on Dec 10, 12:39 PM
    36. Retired Fire Captain (San Diego Fire-Rescue) - Doug Bauer on Dec 10, 12:48 PM
    37. Administrator... - Brian O'Donoghue on Dec 10, 12:54 PM
    38. Category Manager - John Tapsell on Dec 10, 1:20 PM
    39. Serving British Soldier - Ian Barraclough on Dec 10, 1:23 PM
    40. CAD Tech for a bridge manufacturing company - Michael Adams on Dec 10, 1:57 PM
      1. School Teacher - Randy Jackson on Dec 10, 2:29 PM
        1. What about your job on American Idol? - Kurt Laughlin on Dec 10, 9:30 PM
          1. I am not THAT Randy Jackson...n/t - Randy Jackson on Dec 13, 12:19 PM
        2. My wife plays french horn... - Chuck Rothman on Dec 14, 4:58 PM
    41. Education Specialist - Scott Taylor on Dec 10, 3:18 PM
    42. Automotive Design Engineer. - Jeremy Witt on Dec 10, 3:24 PM
    43. Facilities Engineer - Chris Graeter on Dec 10, 3:24 PM
    44. Upholstery technician & leather trimmer - Darren Thompson on Dec 10, 3:41 PM
      1. All time best answer to this question.......... - Ian MacAulay on Dec 10, 3:56 PM
    45. Professional GIGOLO - George Proulx on Dec 10, 3:50 PM
    46. Unemployed Industrial Safety Specialist - Anderson, Merrill on Dec 10, 3:51 PM
    47. Electronics (ex-Defence) - Randy Hampton on Dec 10, 4:16 PM
    48. Ford Franchise Dealer Parts and Service Director - Rob Ervin on Dec 10, 4:29 PM
    49. Night shift supervisor - Shane Gowan on Dec 10, 4:41 PM
    50. Principal Software Developer - Alex Clark on Dec 10, 4:58 PM
    51. Mental Health Social Worker (AMHP) - Dean Allison on Dec 10, 5:12 PM
    52. Disabled - Matt Nethery on Dec 10, 6:00 PM
    53. Pilot : Royal Navy - Jamie Haggo on Dec 10, 6:20 PM
    54. Airline Pilot - Jeremy Moore on Dec 10, 6:43 PM
    55. Househusband - Greg Buechler on Dec 10, 7:28 PM
    56. BTW, I'm the proprietor of a hobby shop in Cleveland, Ohio n/t - Rev Dean J Koler on Dec 10, 8:37 PM
    57. Nothing that is of interest to anyone. - Kurt Laughlin on Dec 10, 9:37 PM
    58. Model Procurement and Inventory Specialist, Part time Assembler. - Mike Witous on Dec 10, 9:54 PM
    59. Engineer - John Rybak on Dec 10, 10:33 PM
      1. What do you do for a living - Charles Davis on Dec 10, 10:36 PM
    60. AOC (Ret), Preservation Specialist/Corrosion Engineer - Jerry Crowley on Dec 11, 1:11 AM
    61. Highway exit ramp Squeegee man - Sean Gilday on Dec 11, 1:32 AM
    62. Motorcycle parts salesman. - Peter Mossong on Dec 11, 2:09 AM
    63. Retired Pipeline Foreman........n/t - Dan Rosecrans on Dec 11, 2:19 AM
    64. Banking - Esko Koskinen on Dec 11, 2:30 AM
      1. Retired Law Enforcement Supervisor - Mark Mick on Dec 11, 4:44 AM
    65. I run a not for profit - Chris Meddings on Dec 11, 8:30 AM
    66. Physics/Science Teacher - Owen Nelson on Dec 11, 10:39 AM
    67. Molecular Biologist - Mario Matijasic on Dec 11, 10:57 AM
      1. cool! - Roman Volchenkov on Dec 11, 2:18 PM
    68. Unemployed God - Herve Charbonneau on Dec 11, 11:46 AM
    69. County Veterans Service Officer - Jolen Bolen on Dec 11, 12:14 PM
    70. Mechanical Engineer - Jesse Naughton on Dec 11, 12:49 PM
    71. Army artillery officer - Bret Kinman on Dec 11, 1:04 PM
      1. King of Battle! - Christopher Mrosko on Dec 12, 10:27 AM
        1. As we say in UK........ - Chris Grove on Dec 12, 11:33 AM
    72. C-5A Flight Engineer - Michael Kalbfleisch on Dec 11, 6:27 PM
    73. Nurse - FJCabeza on Dec 11, 6:47 PM
    74. You guys watch a lot of porn??? - Jeff Flint on Dec 11, 6:49 PM
    75. Television News Photojournalist - Michael Humphries on Dec 11, 7:04 PM
      1. sekundery skool inglesh teechur n/t - Roy Stevens on Dec 11, 8:24 PM
    76. Sr. Writer/Editor - Tim Streeter on Dec 11, 9:44 PM
    77. Production/Quality assembler, inspector, supervisor in Aerospace....when its going.... - Ron Hetherington on Dec 11, 10:02 PM
    78. 2D Renderer! - Ron Volstad on Dec 12, 1:33 AM
      1. Used to be a linehaul driver - Joseph R. Zrodlowski on Dec 12, 2:19 AM
    79. deep sea fisherman 27 years - jamie sumner on Dec 12, 6:55 AM
    80. What do I do for a living? - Jaymes Crowther on Dec 12, 7:10 AM
    81. Professional Good For Nothing - Dave Black on Dec 12, 9:44 AM
      1. Slackrrrrrrrrr - Christopher Mrosko on Dec 12, 10:28 AM
        1. Thanks Chris - Dave Black on Dec 13, 9:16 PM
    82. pasty cubicle dweller - Graeme Davidson on Dec 12, 10:39 AM
    83. Retired stay at home DAD......:) - Anthony Sewards on Dec 12, 10:54 AM
    84. reverse vampire... - gary binder on Dec 12, 12:01 PM
    85. I am a counselor at a clinic that helps Shermanholics. - Cliff Leverette on Dec 12, 12:54 PM
    86. Restaurant Manager and Tattoo collector...n/t - Ryan Spindell on Dec 12, 12:58 PM
    87. I protect people from Mayhem. - David Farris on Dec 12, 1:15 PM
    88. fire fighter - tony zadro on Dec 12, 3:56 PM
    89. What I do... - Steven C. Johnson on Dec 12, 4:38 PM
    90. edjucator for painters - Detlev Kaczmarek on Dec 12, 4:41 PM
      1. Manager - Joe Bevans on Dec 13, 1:32 AM
    91. Unemployed 3D/CAD Designer, CNC Programmer and Modelmaker N/T - Markus Weber on Dec 13, 8:57 AM
    92. Fraud Investigator for the..... - Mike Riedeman on Dec 13, 9:13 AM
      1. Re: Fraud Investigator for the..... - Tony Lawrence on Dec 13, 9:41 AM
    93. Spacecraft Mech Systems Engineer - Paul Roberts on Dec 13, 2:31 PM
      1. Can you build a Gundam??????????????????????????????????????????? - emanuel morales (Zeke) on Dec 13, 8:59 PM
        1. Ick! - Paul Roberts on Dec 14, 11:17 AM
      2. What about the ISS? - Chuck Rothman on Dec 14, 4:48 PM
        1. Waste Management System - Paul Roberts on Dec 14, 11:15 PM
          1. That was done by Walowitz.... - Shane Gowan on Dec 15, 8:16 PM
    94. Crash Investigator - Jim Stratton on Dec 13, 4:46 PM
    95. Director of Credit - Tom Gannon on Dec 13, 6:20 PM
    96. Time & Motion Expert at a brothel - Neil Stokes on Dec 13, 9:19 PM
    97. Professional modeler/hooligan NT - Michael Kirchoff on Dec 13, 9:36 PM
    98. Dedicated procrastinator of plastic - Ray MacMillan on Dec 14, 7:29 AM
    99. The Scenic Factory/ Commercial Snow and Ice Management - John Hoenig on Dec 14, 8:27 AM
      1. Door-to-door Salesman for Good Taste Foods, UK - Andrew Tomlinson on Dec 14, 12:19 PM
    100. Post Man - Ric Montgomery on Dec 14, 12:46 PM
    101. Senior Software Engineer - Mike Doonan on Dec 14, 6:23 PM
    102. Finisher/Painter for Rapid Prototyping Company - Adam Kuller on Dec 15, 4:35 PM
    103. oversize equipment driver - Sean Dunnage on Dec 17, 8:51 AM
    104. Aviation Security Compliance Specialist - Rob Morales on Dec 17, 3:36 PM
    105. High School Teacher and Coach - Brian Crowley on Dec 23, 12:29 AM
    106. I wear hats... - Paul Krylowski on Dec 23, 9:36 PM
    107. TANKS - ossie Orsbourn on Dec 24, 3:56 AM
    108. Many things.... - Marc Le Bayon on Jan 29, 5:51 AM
     
  7. A positive for a change. View Thread - John Bryce on Dec 9, 10:40 AM
    1. More positive vibes.. - Jacob Hederstierna-Johnsen on Dec 9, 2:53 PM
    2. Yes, they've been prompt before - - Andrew Tomlinson on Dec 9, 3:50 PM
     
  8. Kit Instructions - Tamiya 1/35 Leopard 2A5 View Thread - Jorge Hedges on Dec 9, 4:12 AM
    1. Tamiya USA - Andrew Ting on Dec 9, 5:24 AM
      1. Thank you! - Jorge Hedges on Dec 9, 6:52 AM
        1. Hobby Search is also good - david nickels on Dec 9, 1:56 PM
     
  9. Acrylic paint and sticking caps View Thread - Doug Bauer on Dec 8, 2:02 PM
    1. MM paint - Andrew Lee on Dec 8, 4:02 PM
      1. What Andrew said, and... - Gary Cunningham on Dec 8, 4:14 PM
        1. good idea - Andrew Lee on Dec 8, 5:40 PM
    2. Thanks, guys...I appreciate the input - Doug Bauer on Dec 8, 5:24 PM
    3. An option is to use larger - Anderson, Merrill on Dec 8, 10:07 PM
    4. Plastic warp ... - Frank Michaels on Dec 9, 7:54 AM
      1. I use the plastic bags the kit parts come in. - Val Bueno on Dec 9, 11:38 AM
    5. Clean - Matt Nethery on Dec 10, 6:01 PM
    6. Issue is shaking the paint in the bottle... - Ron Hetherington on Dec 11, 10:12 PM
     
  10. ML mailbox View Thread - Rob Haelterman on Dec 7, 9:38 AM
  11.  
  12. Off topic - PC related -sorry !! View Thread - Mirko Bayerl on Dec 7, 2:14 AM
    1. Probably other image programmes would also work. - Stephen Tegner on Dec 7, 4:42 AM
      1. It works ... - Mirko Bayerl on Dec 7, 6:27 AM
        1. It's a pleasure. - Stephen Tegner on Dec 8, 4:52 AM
    2. IRFanview - Brian Balkwill on Dec 7, 6:52 AM
      1. Re: IRFanview - Frank Glackin on Dec 7, 10:06 AM
        1. Brian, Frank , Thanks very much (n/t) - Mirko Bayerl on Dec 7, 2:10 PM
      2. Likewise - Scott Fraser on Dec 8, 5:34 PM
    3. File size - Jim Carswell on Dec 7, 3:22 PM
      1. Thanks Jim :) (n/t) - Mirko Bayerl on Dec 8, 4:04 PM
     
  13. gory soviet figure company View Thread - Cliff Leverette on Dec 6, 2:21 PM
    1. it is based in Belorussia. nt - Roman Volchenkov on Dec 6, 3:15 PM
    2. Most aren't gory at all though - Danny Egan on Dec 6, 5:58 PM
    3. I have a number of their figures (non gory) & they are excellent! - Kevin Ingraham on Dec 6, 7:22 PM
    4. Maybe he shouldn't have held onto the 2d to last grenade so long. nt - Kevin Ingraham on Dec 7, 12:10 AM
      1. Maybe count to..... of Antioch - Alasdair on Dec 7, 4:26 AM
     
  14. Back 2 Base-ix brushes View Thread - Kevin J. McNichols on Dec 5, 11:23 PM
  15.  
  16. AK Interactive Shadow Rust = Satin finish? View Thread - John Bonanni on Dec 5, 6:37 PM
    1. Mine do. - Rod Crisman on Dec 6, 7:00 AM
     
  17. Brass wire for metal tracks View Thread - Peter Beck on Dec 5, 4:37 PM
    1. ArmorFarm - Roman Volchenkov on Dec 5, 7:41 PM
    2. Likewise in the USA - Kurt Laughlin on Dec 5, 8:44 PM
    3. Also didn't use the supplied wire. - Stephen Tegner on Dec 6, 2:42 AM
      1. I use brass rod - Roger Cockburn on Dec 6, 12:19 PM
    4. K & S brass rod - Jim Carswell on Dec 6, 3:17 PM
    5. Craft Pins - Jon Greenwood on Dec 6, 3:36 PM
    6. Model RR brass wire... - gary binder on Dec 12, 12:04 PM
    7. I use copper wire - Bill Inglee on Dec 16, 8:48 PM
     
  18. Looking for some ideas and inspiration for workspace View Thread - Kevin J. McNichols on Dec 5, 11:02 AM
    1. Workspace - Matt Leese on Dec 5, 12:38 PM
      1. Basement modeling ? - James Guld on Dec 5, 1:44 PM
        1. Dehumidifier - Matt Leese on Dec 5, 3:09 PM
    2. This is what I did - Andy Wright on Dec 6, 6:59 AM
      1. Space - George Proulx on Dec 7, 1:37 AM
        1. Well you did ask George... - Andy Wright on Dec 7, 7:56 AM
      2. No 1 Mk III? - Ian McPherson on Dec 9, 4:56 PM
        1. Mk III - Andy Wright on Dec 10, 5:32 AM
          1. Re:MkIII - Ian McPherson on Dec 10, 2:05 PM
     
  19. What is going on with Tristar? View Thread - Max Engel on Dec 4, 3:31 PM
    1. IIRC... - Mike Carroll on Dec 5, 7:59 AM
    2. Web site works and they have contact details - Alan Mckenzie on Dec 5, 9:55 AM
      1. Re: Web site works and they have contact details - Mike Peplinski on Dec 5, 1:19 PM
    3. It is amazing.. - Max Engel on Dec 5, 8:29 PM
      1. There was some discussion about them - david nickels on Dec 6, 8:09 AM
        1. Thanks. NT - Max Engel on Dec 8, 9:08 PM
     
  20. Shipping costs from the new Ammo (Mig) are nuts! . . . View Thread - Tom Morgan on Dec 4, 3:14 PM
    1. Working on it.... - Mig Jimenez on Dec 4, 3:26 PM
      1. Wow Mig, that was fast - thanks. I'll watch for your update. - Tom Morgan on Dec 4, 4:15 PM
      2. Mig, be aware, shipping UPS to Canada... - Paul Roberts on Dec 5, 12:45 AM
        1. Back when I sold model railroad parts to Canadians... - Brian Colburn on Dec 5, 3:20 AM
        2. Paul Hit The Nail On The Head - Chris Johnson on Dec 5, 8:51 AM
          1. Or.. a Canadian Distributor - Graeme Davidson on Dec 5, 10:53 AM
      3. Just waiting on Ammo USA to fire up..... - Scott Millican on Dec 10, 11:33 AM
      4. USPS - John Hoenig on Dec 14, 9:05 AM
    2. Update Transport agencies - Mig Jimenez on Dec 6, 4:45 AM
      1. How about.... - James Guld on Dec 6, 9:46 AM
     
  21. Calender of Models for 2014 Example pages Added View Thread - Andy Argent on Dec 4, 12:09 PM
    1. Sample page,Rust - Andy Argent on Dec 5, 2:55 PM
    2. can you list which models are there? - Roman Volchenkov on Dec 5, 7:42 PM
      1. Re: can you list which models are there? - Andy Argent on Dec 8, 2:42 PM
     
  22. the copyright was violated? View Thread - emanuel morales (Zeke) on Dec 3, 6:57 PM
    1. Be careful with words - Roman Volchenkov on Dec 3, 7:16 PM
      1. thanks! - emanuel morales (Zeke) on Dec 3, 8:10 PM
    2. why not email him directly and ask? - Graeme Davidson on Dec 3, 8:33 PM
      1. because my answer is general.. - emanuel morales (Zeke) on Dec 3, 8:47 PM
        1. Re: because my answer is general.. - David coyne on Dec 3, 9:18 PM
    3. Mig Jimenez - AMMO - Rick Lawler on Dec 3, 9:05 PM
      1. really thanks for your response. - emanuel morales (Zeke) on Dec 3, 9:22 PM
      2. I think this answers all of you. - Roman Volchenkov on Dec 4, 5:03 AM
    4. When did MIG - Sean Brannin on Dec 3, 9:58 PM
      1. I think that flag has - Alasdair on Dec 4, 8:06 AM
     
  23. Looking for Jerry Davis in Louisville View Thread - Scott Woodward on Dec 3, 1:43 PM
  24.  
  25. Tasca/Asuka rumors? View Thread - Pete Colclough on Dec 1, 4:44 PM
    1. Not surprised, if true - Greg Buechler on Dec 1, 5:13 PM
      1. I hope they continue making new stuff - Pete Colclough on Dec 1, 9:26 PM
        1. They won't stop production, Pete... - Greg Buechler on Dec 1, 9:41 PM
        2. Pacific Coast still seems to have everything in stock... - bwillson on Dec 2, 9:04 PM
    2. So, the old designer is gone... - Paul Roberts on Dec 2, 11:02 PM
      1. :) - Pete Colclough on Dec 3, 4:14 AM
        1. Girls and Panzers - Cliff Leverette on Dec 4, 3:44 PM
          1. Absolutely, Cliff! - Greg Buechler on Dec 4, 6:15 PM
          2. Cmon Cliff - the pink tank was an M3 Lee, not a Wolverine! (wink) - Scott Gentry on Dec 6, 4:37 PM
     
  26. Stencil Cutting Services? View Thread - Mark Rethoret on Nov 30, 6:31 PM
    1. try these guys? - Graeme on Nov 30, 7:25 PM
      1. Thanks, unfortunately.... - Mark Rethoret on Dec 1, 12:35 PM
    2. These guys do great custom work . . . . - Tom Morgan on Nov 30, 9:38 PM
      1. agreed, Miracle Masks are amazing - Mario Matijasic on Dec 1, 2:38 AM
        1. cam net? - Graeme on Dec 1, 7:50 AM
          1. barracuda camo net - Mario Matijasic on Dec 1, 1:32 PM
      2. Thank you! - Mark Rethoret on Dec 1, 12:36 PM
    3. Most T-Shirt and screen printing shops - Christopher Mrosko on Dec 3, 1:00 PM
     
  27. Copright rules View Thread - Erik Ahlström on Nov 29, 7:09 PM
    1. I think posting images of things you own is OK - Roger Cockburn on Nov 30, 3:27 AM
    2. Cite the sources - Mike Roof on Nov 30, 11:23 AM
    3. you dont have any problem with copyright.. - emanuel morales (Zeke) on Dec 1, 6:11 PM
    4. Carefull with copyright issues - Anthony Sewards on Dec 2, 11:51 PM
     
  28. Trouble? inside the armor View Thread - Jim Stephens on Nov 29, 12:10 AM
    1. contact via facebook? - Andrew James on Nov 29, 3:25 AM
    2. the email address is correct - Chris Meddings on Nov 29, 4:56 AM
    3. spelling - Ken Holland on Nov 30, 6:26 PM
      1. Spelling - Jim Stephens on Dec 1, 1:20 AM
        1. No, its spelled right on my website, and I do get emails - Chris Meddings on Dec 1, 8:20 AM
          1. Got your Emails, did you get mine? - Jim Stephens on Dec 2, 12:50 AM
            1. Nothing received Jim - Chris Meddings on Dec 2, 7:45 AM
              1. email problem - JIm Stephens on Dec 2, 5:01 PM
     
  29. Would like to find out what happened to the masters from Hard Corps Models View Thread - Jose. T. Rodriguez on Nov 28, 12:25 AM
    1. some have been sold - Christopher Mrosko on Nov 28, 6:13 AM
     
  30. Odd ball View Thread - GED cranny on Nov 27, 2:08 PM
    1. Can you be a bit more specific? - Robert Lockie on Nov 27, 2:35 PM
      1. Now there you go with them negative waves, Rob. - Cliff Leverette on Nov 27, 2:43 PM
        1. Re: Now there you go with them negative waves, Rob. - George Proulx on Nov 27, 7:09 PM
          1. Tigers in the bocage... probably it was a Renault '39. No tigers in the American sector of - Cliff Leverette on Dec 4, 3:48 PM
      2. that is the name... from Kellys Heroes - david nickels on Nov 27, 6:57 PM
        1. I would like to see a close up of Rickles ... - Cliff Leverette on Dec 4, 3:52 PM
      3. Re: Can you be a bit more specific? - George Proulx on Nov 27, 7:05 PM
        1. Ah - Robert Lockie on Nov 28, 6:53 AM
    2. Odd Ball - Dean J Kohler on Nov 27, 4:45 PM
     
  31. Raising prices before putting on sale? View Thread - Robert Case on Nov 25, 3:00 PM
    1. Laws in The UK - Ian Barraclough on Nov 25, 3:07 PM
    2. It's Squadron and no - david nickels on Nov 25, 4:27 PM
      1. Re: It's Squadron and no - Robert Case on Nov 25, 4:58 PM
        1. whatever... why not ask them directly? - david nickels on Nov 25, 5:20 PM
          1. Re: whatever... why not ask them directly? - Robert Case on Nov 25, 5:31 PM
    3. It's not everything; and It can work to your favor - Kurt Laughlin on Nov 25, 8:45 PM
    4. Skip a month shopping - Stephen J. Pringle on Nov 26, 9:56 AM
    5. LOL, I knew exactly who you were talking about just from the title. - Brian Colburn on Nov 27, 4:57 PM
     
  32. Trying to find info on Royal Models park bench View Thread - Jim Hockett on Nov 24, 11:50 AM
  33.  
  34. More movment between Mig and AK. View Thread - Ian Howes on Nov 22, 7:04 AM
    1. Why doesn't ... - Frank Michaels on Nov 22, 7:17 AM
    2. apparently no written contracts... - Stefan Bernet on Nov 22, 8:32 AM
      1. But far from uncommon - Alasdair on Nov 22, 11:22 AM
      2. All too common - John Tapsell on Nov 22, 2:42 PM
        1. For a lot of deals in the Hobby - Alasdair on Nov 22, 4:07 PM
          1. It doesn't have to - Kurt Laughlin on Nov 22, 4:24 PM
            1. agree with that for sure - Alasdair on Nov 22, 4:43 PM
          2. Needn't cost anything... - John Tapsell on Nov 22, 5:34 PM
          3. Not to mention legal costs of dissolving/resolving a contract... - Pedro Sanchez on Nov 25, 6:19 PM
    3. copyright problems detected.. - emanuel morales (Zeke) on Nov 24, 1:33 PM
      1. That of course assumes... - Scott Millican on Nov 26, 11:33 AM
     
  35. Compliments to Takom... View Thread - Paul Budzik on Nov 20, 11:40 PM
    1. Perhaps compliments to Takom would be better..... - Jon Feenstra on Nov 21, 12:26 AM
      1. Oops...Thanks Jon - Paul Budzik on Nov 21, 1:46 AM
     
  36. Anyone know whose work this is? View Thread - Michael Adams on Nov 19, 9:40 PM
    1. Joaquín García Gazquez's... - Antonio Martín Tello on Nov 20, 3:37 AM
    2. Great figure painting. - Stephen J. Pringle on Nov 20, 8:45 AM
    3. Yes... - Joaquin Gª Gazquez on Nov 21, 1:46 PM
     
  37. Tamiya paint drying chalky View Thread - Tracy Hancock on Nov 19, 8:00 PM
    1. Spraying from 10" away? - Brian Colburn on Nov 19, 9:17 PM
    2. Hmm... - Andrew Lee on Nov 19, 9:22 PM
    3. Tamiya X20A thinner - Javier de Luelmo - Diesel on Nov 20, 7:19 AM
    4. probably 3 things - david nickels on Nov 20, 8:49 AM
    5. thanks guys - Tracy Hancock on Nov 20, 9:09 AM
      1. Using plain water not distilled water may be a problem... - Andrew Tomlinson on Nov 20, 3:40 PM
        1. ive never had a problem with that - david nickels on Nov 20, 7:36 PM
      2. Yep too far away... - Michael Rinaldi on Nov 20, 6:06 PM
    6. Add Tamiya Clear to the mix - John Bonanni on Nov 20, 4:40 PM
      1. +1 this works - you can also add an acrylic retarder which helps... - Scott Gentry on Nov 21, 1:40 PM
      2. Or Johnson's Klear, when around? - Andrew Tomlinson on Nov 21, 2:00 PM
    7. My experience - Roman Volchenkov on Nov 21, 9:24 AM
    8. Tamiya paint drying chalky - Joe Gaudon on Nov 21, 7:19 PM
     
  38. Help Painting Mickey Mouse Camo View Thread - Brian Crowley on Nov 19, 12:24 AM
    1. Re: Help Painting Mickey Mouse Camo - Paul Roberts on Nov 19, 12:21 PM
      1. Or......do it the easy way.... - Danny Egan on Nov 19, 8:25 PM
    2. Why not hand paint it? - Javier de Luelmo - Diesel on Nov 20, 7:25 AM
      1. Very neat set of Jeeps there... - Andrew Tomlinson on Nov 20, 3:28 PM
     
  39. WANTED: Tips on how to teach a 7 yearold View Thread - Kevin J. McNichols on Nov 18, 12:47 PM
    1. I too taught my grandson - Michael Kirchoff on Nov 18, 1:34 PM
    2. my kids have built the 1/72 italeri game vehicles - Aaron Smischney on Nov 18, 1:35 PM
    3. dont underestimate! - Andy Renshaw on Nov 18, 2:22 PM
    4. Airbrush et al - Randy Hampton on Nov 18, 3:34 PM
    5. 1/24 & 1/25 car kits are probably the easiest for a kid... - Brian Colburn on Nov 18, 8:54 PM
    6. Re: WANTED: Tips on how to teach a 7 yearold - Donald Puckett on Nov 19, 12:22 AM
    7. My youngest son is 9 now - Rob Gronovius on Nov 19, 9:25 AM
    8. thanks to everyone for the responses - Kevin J. McNichols on Nov 19, 1:36 PM
    9. Let him build something that he can play with later... - Mike Roof on Nov 19, 4:58 PM
      1. I'll second the play aspect - Rob Gronovius on Nov 20, 9:38 AM
    10. Speaking from experience... - Rufus Burridge on Nov 24, 11:32 AM
    11. I gues no matter how the - Detlev Kaczmarek on Nov 26, 1:51 PM
     
  40. What's your favorite thinner for oil washes. View Thread - Kevin J. McNichols on Nov 18, 11:10 AM
    1. Turpenoid, but ... - Michael Kirchoff on Nov 18, 1:27 PM
      1. I'll second that - Mark Rethoret on Nov 19, 12:52 AM
    2. Humbrol Thinner - John Bonanni on Nov 18, 6:35 PM
      1. Re: Humbrol Thinner - Frank Glackin on Nov 30, 4:46 AM
    3. Thinners - Mike Gardella on Nov 20, 7:47 AM
     
  41. Photos from Nordic Challenge modeling event. View Thread - Pekka Nieminen on Nov 18, 8:31 AM
  42.  
  43. nt View Thread - Michael Karnowka on Nov 17, 10:31 PM
  44.  
  45. DECALS View Thread - George Proulx on Nov 17, 2:58 PM
    1. Re: DECALS - Rob Gronovius on Nov 17, 8:44 PM
    2. Re: DECALS - Aidrian Bridgeman-Sutton on Nov 19, 9:34 PM
      1. !@#$%^&*()_+ - George Proulx on Nov 19, 10:07 PM
        1. Don't panic - Aidrian Bridgeman-Sutton on Nov 20, 4:08 PM
          1. GREAT info - George Proulx on Nov 20, 4:50 PM
            1. When it comes out of the printer - Aidrian Bridgeman-Sutton on Nov 20, 7:23 PM
     
  46. Blast models View Thread - GED cranny on Nov 17, 10:34 AM
    1. Why not order from BLAST directly? - Michael Karnowka on Nov 17, 6:00 PM
      1. Ordering from Blast - Andrew Ting on Nov 17, 10:17 PM
        1. Yep, ditto to what Andrew said, - kylie newton on Nov 18, 2:41 AM
    2. Blast Use Parcel Force - C Johnson on Nov 18, 2:48 AM
      1. Blast - Ged cranny on Nov 18, 3:37 AM
    3. Blast v2 kit - Ged cranny on Nov 21, 12:15 PM
     
  47. Any CAD artists about? View Thread - Greg Knowles on Nov 17, 1:58 AM
    1. 3D wheels - Dennis Loep on Nov 17, 5:05 AM
     
  48. Looking for 1/16th scale T-34/85 turret and gun View Thread - Jose. T. Rodriguez on Nov 16, 11:07 PM
  49.  
  50. Mig production View Thread - Luc Harvey on Nov 15, 5:54 PM
    1. Re: Mig production - Ken Abrams on Nov 15, 6:10 PM
    2. Tikkurila 1050 is my choice - Ilya Yut on Nov 16, 3:24 AM
     
  51. Request: Identify this grass View Thread - Bill.Curtis on Nov 15, 8:51 AM
    1. Here is a link to a listing of products. - Brock Hopkins III on Nov 17, 9:07 AM
      1. What Grass.........Found. - Bill.Curtis on Nov 24, 6:25 PM
     
  52. ICM Customer service View Thread - Yuri Gavrilov on Nov 15, 6:44 AM
  53.  
  54. Hobby Shops in St. Petersburg, Florida? View Thread - Chuck Rothman on Nov 14, 3:00 PM
    1. Only one in Pinellas Park - david nickels on Nov 14, 3:48 PM
      1. The museum it is! - Chuck Rothman on Nov 15, 1:31 PM
    2. Also... - Paul Roberts on Nov 14, 5:06 PM
      1. its all fenced off - david nickels on Nov 14, 8:05 PM
     
  55. Long Shot View Thread - Rick Carlson on Nov 13, 5:52 PM
    1. Just a guess... - Rob Skipper on Nov 13, 6:04 PM
    2. shop or die tryiing... - John Lam on Nov 15, 9:25 AM
     
  56. 1.6 mm brass rivet source View Thread - Paul Krylowski on Nov 13, 1:25 PM
    1. Try here - Mike Peplinski on Nov 13, 2:38 PM
      1. thank you - Paul Krylowski on Nov 13, 8:05 PM
     
  57. “Pigment Fixer” alternative? View Thread - John Bonanni on Nov 12, 9:34 PM
    1. Re: “Pigment Fixer” alternative? - Roman Volchenkov on Nov 13, 3:29 AM
    2. like Roman mentioned - Ken Abrams on Nov 13, 8:13 AM
    3. Tamiya Thinner - Scott Dimmick on Nov 13, 9:48 AM
    4. My recipe - James Guld on Nov 13, 9:55 AM
    5. Re: “Pigment Fixer” alternative? - Jon Greenwood on Nov 13, 2:32 PM
    6. Vallejo sells a pigment fixer - david nickels on Nov 13, 3:47 PM
      1. Basically just their Matt Medium - Scott Millican on Nov 14, 12:33 PM
    7. Thanks Guys! - John Bonanni on Nov 13, 7:40 PM
      1. be careful, it can leave tide marks - Mark Dugan on Nov 14, 7:59 AM
    8. I use white spirit.. - emanuel morales (Zeke) on Nov 14, 11:55 AM
    9. Pigment Fixer - Jeff Kleinhenz on Nov 15, 11:14 AM
     
  58. Telford, Scale Model World 1/35 Armour & Vehicle pictures View Thread - Glen Phelan on Nov 12, 7:07 PM
    1. Thanks Glen. - Patrick Keenan on Nov 13, 7:58 AM
     
  59. SAM Publications Contributing Author Issue Resolution View Thread - Mike Roof on Nov 12, 5:08 PM
    1. [sic]? - Ken Holland on Nov 12, 5:17 PM
      1. Oh well, I'm not from England. n/t - Mike Roof on Nov 12, 5:29 PM
    2. My payment resolved as well. - Jim Carswell on Nov 12, 7:09 PM
    3. Re: SAM Publications Contributing Author Issue Resolution - Olivier Carneau on Nov 13, 1:55 AM
    4. Mike, - Roman Volchenkov on Nov 13, 3:27 AM
      1. It has been my experience..... - Alan Mckenzie on Nov 13, 7:31 AM
        1. As a contractor... - Ken Abrams on Nov 13, 8:07 AM
        2. It doesnt take long time to send contributor basic information - Roman Volchenkov on Nov 13, 8:34 AM
          1. I'm not defending SAM publications just stating my experience. - Alan Mckenzie on Nov 13, 9:57 AM
      2. No, Roman, I did not say that. - Mike Roof on Nov 13, 9:44 AM
    5. Re: SAM Publications Contributing Author Issue Resolution - John Bryce on Nov 15, 6:54 AM
    6. Good for you, but... - Jacob Hederstierna-Johnsen on Dec 4, 4:59 AM
     
 << Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30   Next >> 

Visitors in this forum in the last 10 minutes: 15 Visitors
15 guests


Terms and Conditions of Use
Report abuse