Home > Discussion Groups > Figures

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47212&messageid=1113823220
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

I used some Testors Gloss coat...

January 20 2010 at 11:19 AM
Ryan Spindell  (Login resinaddict)
Missing-Lynx members
from IP address 98.215.255.186


Response to Crossdelta camo uniform decals, basecoat to be used?

Howdy Glen,
I used some Testors gloss coat as a base after priming. Put the decals down and then used dull coat. Make sure you stay far enough away when you spray or you will get some whitening on the decal. HTH, Ryan

 
 Respond to this message   
Responses

  1. Future...... - Glen Phelan on Jan 20, 2010, 11:58 AM
    1. Be prepared to use a lot of micro-sol or the like... - Ryan Spindell on Jan 20, 2010, 2:18 PM
     


Terms and Conditions of Use
Report abuse