Home > Discussion Groups > Figures

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47212&messageid=1113823220
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

120 MM Replacement Heads

May 24 2012 at 2:47 PM
Andy Tedtsen  (Login klatuyou)
Missing-Lynx members
from IP address

I have a 120 mm figure from Verlinden and dont like the way the head looks.
Are there any aftermarket outfits that make replacement heads like hornet does for 1/35 scale.
The figure is the B-17 creman from Verlinden. This is the old Memphis Belle figure not the newer
one of the waist gunner.

thanks in advance


 Respond to this message   
Richard Pearce
(Login maxim37)
Missing-Lynx members


May 25 2012, 10:31 AM 

Dear Andy
Verlinden does replacement heads as you probably know.Also if you go to the Historex agents site they have some heads from miniature alliance.I have a set and they are very good indeed.Trouble is if you want a head with say flying helmet etc it could be problematic.Erm maybe grind the old memphis belle away and try putting a miniature alliance etc head in to fit.
Good luck from Richard.

 Respond to this message   
Randy Hampton
(Login randy.hampton)
Missing-Lynx members

Reedees Miniatures

May 25 2012, 9:56 PM 


I see that Reedees Miniatures have some 120mm head sets which look quite good.

No connection.


 Respond to this message   
Rod Crisman
(Login grunt26)
Missing-Lynx members

Try browsing the website of Michigan Toy Soldier

May 30 2012, 6:42 PM 

They are resin, metal and plastic figure "specialists" and carry several different lines of resin replacement heads, some from the nationally known, others from more obscure sources, but many are in the $2-4 US range, and I can always find something useful there.
Its worth a shot. I personally like the Michael Roberts heads as replacements.

Hope this helps,

 Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  

Terms and Conditions of Use
Report abuse