Home > Discussion Groups > Private Resellers

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47214&messageid=1113823388
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

Aber p.e parts needed for Jagdtiger -

November 3 2009 at 7:11 PM		   (Login tednichols)
Missing-Lynx members
from IP address 75.140.20.16
I REALLY need some of the skirt mounting brackets for the Tiger II or Jagdtiger in 1/35. The Jagdtiger is Aber 35041 and the part number is #5. I do not know the Tiger II numbers. Any assistance is appreciated.Thanks. Ted Nichols

 
 Respond to this message   
AuthorReply

(Login Yeahwiggie)
Missing-Lynx members
213.51.106.201

I think I can help!

November 4 2009, 5:35 AM 

I have a lot of spare etchings for a Jagdtiger and if I looked right, the parts needed are there too.
Sent you an email.

cheers
Ron

Here's my halftrackforum:
http://halbketten.forumotion.com/index.htm

 
 Respond to this message   
Current Topic - Aber p.e parts needed for Jagdtiger -
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use Report abuse