Return to Index  

RC-135S Cobra Ball - WIP - Part XVII - (note for David Hansen)

April 15 2012 at 6:05 AM

Alberto Accumolli  (Login illomucca)
HyperScale Forums
from IP address

Hi to all my Hyperscale friends,
here is a very small but important update : after a long struggle Iwas able to get a satuisfactory finish on the upper rear fuselage area where the reinforcing strips posed a big problem .!!!




To get this result I reinforced the back of a wet&dry paper with Scotch tape and cut small stripes of paper about 0.5 mm. narrower than the interspace width of the reinforcing strips on fuselage and used such small strips to sand the interstrips spaces . (hope this could help you David) .

Actual problem I'm dealing with is the rescribing of the auxiliary air intakes on engine cowlings .

That's all for today


Alberto Accumolli


 Respond to this message   

To post an image of your models, you will first need to find somewhere to host your photos on the Internet. Your ISP will often give you a limited amount of free web storage, and other online photo storage is also available.

To post a link or an image, simply type in the URL (web address) of the destination page or image. The URL will appear as a link (for an HTML link) or an image (if you link direct to a .jpg file) when posted. You can use the Preview facility to see how your message looks before posting to Plastic Pix.

Please try to keep image sizes to 800 pixels wide or less, as larger sizes will be too big to fit on many computer screens. Also, file sizes should be kept to around 100kb or less, otherwise download may be very slow.

For Scale Aircraft Modelling questions or discussion, please visit the Plane Talking Discussion Group.

Please note a few points of etiquette. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server and repeat offenders will have their registration cancelled.

free counters