Return to Index  

1/48 YP-39B

June 19 2012 at 8:46 PM

  (Login Bill_Cronk)
HyperScale Forums
from IP address 184.7.240.113

This is my 1st foil finish. I learned a lot and plan on trying this foiling again. I read the article posted here by Mr. Friend about foiling and found his advice great and his tech. sound. I also found if you use micro foil glue diluted with 70% alcohol it really helps the glue flow better and when you make a flubb-up which you will!!!! it helps the glue release better. I used the Eduard kit which fits great and has hard plastic just right for polishing. I cut the vertical stab. filet away and changed a few panels and gun ports etc. The best advice I have concerning foiling is DO NOT USE A PRIMER BASE because all the rubbing, gluing and such it will cause the base coat to release from the plastic making your finish suffer. Hope you like it so far.

[linked image]?t=1340152756
[linked image]?t=1340152776
[linked image]?t=1340152869
[linked image]?t=1340152811
[linked image]?t=1340152843
[linked image]?t=1340152899

"Never run out of airspeed,altitude and ideas all at the same time" Pilots Creed


    
This message has been edited by Bill_Cronk from IP address 184.7.240.113 on Jun 19, 2012 9:09 PM


 
 Respond to this message   
Responses


To post an image of your models, you will first need to find somewhere to host your photos on the Internet. Your ISP will often give you a limited amount of free web storage, and other online photo storage is also available.

To post a link or an image, simply type in the URL (web address) of the destination page or image. The URL will appear as a link (for an HTML link) or an image (if you link direct to a .jpg file) when posted. You can use the Preview facility to see how your message looks before posting to Plastic Pix.

Please try to keep image sizes to 800 pixels wide or less, as larger sizes will be too big to fit on many computer screens. Also, file sizes should be kept to around 100kb or less, otherwise download may be very slow.

For Scale Aircraft Modelling questions or discussion, please visit the Plane Talking Discussion Group.

Please note a few points of etiquette. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server and repeat offenders will have their registration cancelled.

free counters