re-jetting question

by Nick Moll (Login jammin2exodus)
Horsemen

I have a 84 FXR. The drivetrain is all stock besides changin it to kick start only. The pipes were self made and are drag pipes. Whenever its stopped and I rev the engine a bit of white smoke shoots out of the tail pipes. I added today a "poor mans baffle". Drilling a quarter inch bolt at the end with a pile of washers for back pressure. Still is doing it so Im gonna re-jet it because it never was after building the bike. Is this a good idea or are there others steps I should try before hand. Ive already adjusted the idle screw and all that. Seems to run a bit hot too but I know these engines tend to do that so that part is probably just me worrying. Thanks for the help.

Nick

Posted on Jun 12, 2012, 6:53 PM
from IP address 76.31.243.92


Respond to this message

Goto Forum Home
Responses