mostly basic bolt on

by dan r (Login danr)

with oem heads you will need to use oem type pan cylinders.
you can either drill the case for the rear cylinder top end oil feed or go outside oiling to the head.
front cylinder head oiling, you can remove a factory plug or go outside feed.
tappets and blocks work for either shovel or pan... all the same more or less.
you will need pan pushrods and upper tube keepers.
use pan exhaust and intake.
top motor mount is the same for pan or fl shovel

bolt it together and go...

'stupid signature words go here'

Posted on May 27, 2013, 3:54 PM
from IP address

Respond to this message

Goto Forum Home