In other words THE HORSE is in no way responsible for any parts bought or sold on this board.
Off topic posts will be DELETED
Buyers and sellers of engines and frames should understand the legal status of the parts before the sale. Avoid problems and have the status understood up front. State conditions of the sale beforehand, and stick to the agreement. Parts known to be stolen or have bad numbers SHOULD NOT be bought or sold on The Horse Swap Board in the first place. Buyers beware but sellers be responsible. Long flaming posts clogging up the board are no fun. Avoid them by having all conditions understood and settled up front.
Please make sure you post PRICE AND LOCATION when selling parts.
Sorry, but due to psycho spam posters, you will now need to register to post.
Need a mag for my pan prefer a lower $
mag needs rebuild have a new Mallory billet
distributor maybe trde and cash $$ in south
jersey email with info and pics underground_customs@comcast.net
Posted on Nov 14, 2009, 9:47 PM from IP address 166.137.139.152
i have a 2000 softtail chopper i still need 41mm legs for,,
maybe a nice headlight for the same bike,,
also a 47 flathead chopper trike,, looking for an old 50's tractor seat
round oil bag,i can tuck under the seat,,,2-matching brake rotors for the trike....
and im building a 76 sporty rigid looking for 39mm legs,after market headlight,,maybe a cool set of risers or bars,, 21 inch front wheel,,,
got anything kool ya wanna come off of?? these are just some of the parts im surfing for,,,,i know these oil pumps are perty pricy,, but im not attached to this one,,, make me an reasonable offer under a 100 bucks
and its yours,,im parting out this 80' ironhead engine anyway
Posted on Nov 14, 2009, 9:51 PM from IP address 174.101.85.1
Did a deal with him for some pogo seat parts and couldn't have been happier with the way he did the deal, the super quick shipping, and the quality of the goods...
will deal with him anytime!!!...I wish he had all the parts I've ever wanted!!!!
Thanx again, Axle...much appreciated!!!
Larry in MD
"Those with character and class always seem sinister to the rest..."
Posted on Nov 14, 2009, 10:57 PM from IP address 72.45.15.216
These have been sitting in a box for a couple years and never got used. First peek at them out of the wrapper was right now for the photos so they are basically brand new. Includes 8" aluminum spacer tubes which allows you to use your stock length springs. $75 plus shipping from 85236. PayPal accepted. Figure 18 pounds once packaged to ship. Thanks for looking.
.
.
Posted on Nov 14, 2009, 7:10 PM from IP address 24.56.45.29
Nice set of 40 spoke stock HD wheels off a 2003 softail. 3/4 axle chrome is in GREAT condition, pulled off the bike in 2004 been sitting in the shop ever since. comes with a set of HD stock rotors. $185.00 plus shipping from 46725
Nice set of Trees from 03 softail, 41mm chrome is real nice, comes with all hardware $80.00 plus shipping from 46725
NEW chrome horseshoe oil tank for softail or ridgid NEVER been used $45.00 plus shipping from 46725
Rear cast mag from a sportster NO bearings, wheel is in good shape. $40.00 plus shipping from 46725
PAYPAL is best E-mail me with any questions vishous1@hotmail.com
http://vishouscycle.blogspot.com/
Posted on Nov 14, 2009, 5:12 PM from IP address 173.24.3.28
60 spoke Stainless wheel in GREAT shape.....Comes with a NEW 250 Avon tire..$300 + shipping from 77518..call with any questions 832***769*** 6045 thanks Billy
Posted on Nov 14, 2009, 4:19 PM from IP address 208.54.83.71
25 over Denvers Choppers Springer front end COMPLETE with 21" wheel, Billet Headlight, & Choppers Inc. Prison handle bars
The springer is in great shape & handles like a dream........the 21" wheel is a 60 spoke stainless wheel with a NEW Avon tire, in great shape also.....The handle bars are Choppers Inc Prison bars with Internal Throttle , they will need to be rechromed or painted.....This is a GREAT DEAL....I have $1700 in the springer alone......in a bind so something has to go....my loss ur gain.....call with any questions 832***769***6045 thanks billy
Posted on Nov 14, 2009, 4:12 PM from IP address 208.54.83.55
the wife said that since I'm selling these parts to finish her shovel she's be glad to hold them while I took the pic
both lights work
$85 delivered
paypal or money order
thanks for looking
Posted on Nov 14, 2009, 2:54 PM from IP address 71.80.8.50
got a new Ultima "still in the box" never been installed starter for the 81 shovel I had, and a new Accel solenoid still in the package for sale if anyone is interested
I dont' have a camera to load pics but these two items are brand new and still in the original packaging - will sell together as a package or seperately if your interested
$100 for the starter
$30 for the solenoid
split the shipping costs
Posted on Nov 14, 2009, 2:30 PM from IP address 75.145.62.105
Clearing out some of the goodies from the garage.
Cool twisted leg narrow springer. Chrome on legs is good. about 32" from stem to axle. 1" Stem Needs Top Clamp and hardware $300 OBO
18" Spool Wheel Chrome not so great. $100 OBO
Little Suzuki Dirtbike Tank Pretty Nice $75 OBO
23" Long Fender Piece. 5" Wide $20 OBO
Every thing is OBO don't like the price. Make me an offer.
Paypal preferred for everything. Local Pickup with cash is ok.
Shipping will be actual to your location.
Thanks!
I have other stuff for sale search PanShovelGeo
-Pan Shovel Geo
www.panshovel.blogspot.com
Posted on Nov 14, 2009, 2:13 PM from IP address 66.117.185.213
rootin' thru my stuff, I figure I can part with some things I once held as sacred. One such item is my random selection of back issues of Iron Horse. I also have numerous issues of The Horse, including ISSUE #1 & 2 still wrapped in plastic unopened. If anybody is interested, shoot me a note either here or at my Hotmail and I'll make time to list all that I have and we can talk of their worth to ya'. Thanks
Posted on Nov 14, 2009, 11:24 AM from IP address 99.150.166.27
I had an indian in iron horse in the early 90's. Maybe 91 or 92. It was a red chief with a chrome leaf springer. I lost my copy and I would love to get one if you have it, or anybody else for that matter. Also had my buddys black pan in it.
This is the bike. They did a few pages on it.
[IMG][/IMG]
Posted on Nov 14, 2009, 12:13 PM from IP address 69.142.118.108
as well as almost every Horse. I MIGHT have a duplicate of the issue you want, I'll have to look. That Chief was awesome, I believe the title of that feature was called "One Hell of a Chief". It certainly is (or was).
Posted on Nov 14, 2009, 7:01 PM from IP address 64.136.26.230
Finally found one. Just moved this last summer, and everything is still a mess. I'm still looking for a second issue, if I find one, it's yours. I gotta leave for work tomorrow though. I travel a lot on my job.
I hear you about everything back then being a blur. Wish I could teleport back and do it again! Everything today is so goody-two shoes and boring.
Posted on Nov 14, 2009, 9:52 PM from IP address 64.136.26.230
Sorry for the "link" to the pic (and I'm not sure if it will work). Photobucket is giving me a hard time. When I get it figured out I'll post a real pic or I can e-mail you one.
Posted on Nov 14, 2009, 12:12 PM from IP address 24.154.173.239
I am in Upstste New York, Albion Zip 14411. Need dough to finish a restoration project,so please make an offer on anything if you feel the price is too high. Either PM here or e-mail me Either Postal MO or Paypal for payment,(+3%) is cool,and e-mail me for pics at arosenbaum@rochester.rr.com
1. Good used primary chain $25.
2. Chrome 4 Speed Suicide Clutch Rod $25.
3. Shovel shift arm natural finish $10.
4. 70's Superglide exhaust bracket/bar $20.
5. 1970's 10" drilled rotor $25.
6. 2 Sets of 70's Superglide swingarm shocks $35.pr.
7. Folding BT kick arm and pedal $30.
8. 4 speed belt drive 3 finger hole chutch end plate $25.
8. Rear banana caliper with good pads $55.
9. HD Factory fat pegs $15. Skinny rubber peg covers $10.
10. Set of wideglide tree stops $10.
11. New in the wrap wide glide,(in the raw) fender for 21" wheel $40.
12. 35mm Narow glide bottom tree cover $10.
13. Black powdercoated 70's front MC $20.
14.
15. 6" rear flat fender with tailight $85.
16. Sportster 70's headlight visor idiot lights $25. with
17. Dresser speedo base $20.
18. Used 70's front master cylinder $20. Another Natural $20.
19. New in the box OEM HD 82 and later XL ignition module cover black $15.
20. Sportster Sissybar $20.
21. Sporty front and rear,(trimmed back) fenders $45. pair
22. Sporty stock 70's guages $35.
MORE PARTS
1. Absolutely Brand New 19" 9 Spoke mag with new Pirelli tire $200.
2. Like New 1970's Superglide and later license plate holder bracket and reflector $10.
3. 2 Panhead solid tappets $25.
4. 9" New rear frender $65. shipped
5.. HD 10" disc rotors excellent condition $70. pair
6. Superglide rear axle $15.
7. Shovelhead pinion oil pump drive gear (1976)$15.
8. Superglide rear axel chrome nut end $25
9. Stock mirrors $10 each chrome all kinds have 5-6.
10. New in the wrap HD mirror $20.
11. Shovel swingarm chrome conversion for flat fender, use, strut supports and removeable sissy bar $150.complete.
12. Black kick stand spring $4.
13. 1970's front MS Baked on Black $30. Natural $20
14. Mainshaft Clutch nut for 4 speed $5. each have 2
15. Sifton Solid Pushrods Set for Shovel/Pan $30.
16. Shovel chrome shifter/kickstand bracket $25.
17. Stock 1976 FXE front disc brake line $10.
18. FLH 70's fender chrome bumper $10.
19. Excellent ajustable chrome swingarm $125. Chrome shocks $65.
20. Ratchet top dust cover aluminum $3.
21. 1976 narrow glide bottom tree stop $8.
22. Soloid 16" Fatboy front wheel with excellent tire $150.
23. Shovel kick stand spring $3
24. 70's Dresser chrome shift side kickstand plate / bracket $20. New Black powdercoat shift bracket $30.
25. 6 4 speed clutch springs $5.
26. V Twin seal kit #23-0687 $8.
27. Chrome wide glide axel $25.
28. Custom yellow and chrome grips $20.
29. Used 8" Chrome risers skinny style $50.
EVOLUTION BT
1. NEW KuryAkin Chrome Starter Cover new in wrap #9051 Dyna, FXR, FLT $25. lists for $39.
2. New in box OEM HD air filter #29036-888 $8.SOLD
3. *Used "Big Dog Seat" Black wide! $60.
4. "New" Chrome late(90's) front master cylinder, (handlebar ) 5/8 with chrome lever $65.
5. New Evo rubber intake o rings $5. pair Rubber band shovel wide o rings $8. pr
6. HD Evo "L" cam $15.
7. New pair wide glide gators $25. SOLD
8 Evo FXR electronic ignition module $10.
9. Evo 5 speed trans with kicker kit, kick arm, and pedal $700.SOLD
10. Aluminum grip set $35.
11. Black spoon seat $50.
12. New chrome clip on(grip ends) custom mirror set $40.
13. Chrome Fat Boy headlight ring $15.
14. Late model Coil cover chrome used excellent $10.
15. Black seat with buttons $50.
16. Tin Weber backing plate $10.
17. Fat Boy stock air cleaner cover $20. Headlt ring $15.
18. Fat Boy heat shield with clamp $15.
19. Sporty handle bars $20.
20. Takeoff Evo BT springs, valves, collars complete 15K on heads $40
SPORTSTER
1. Early Sportster chrome rear hub K MOD $30.
2. 1 Late model Showa Sporty lower leg excellent $15.
3. Sportster rear wheel 16" may be K Model $75.
4. Sportster 70's headlight visor idiot lights $25.
MORE PARTS
1. Wide Glide chrome tweek bar chrome $75. SOLD
2. Chrome 70's shift plate $20. 1 piece of chrome peeling.
3. Chrome 1960's BT non-splined shift lever X 2 $15.ea
4. Another with bad chrome $10.
5. 1970's Sportster rear mech brake cover $25.
6. New 5 gallon stretched flat side fat bobs $200.
7. USED 17" X 200 racing Slick $45.
8. 40" Shovel drag pipes 2 mounting flanges to heads $40.
Please e-mail me for pics at arosenbaum@rochester.rr.com Thank You, Al
Posted on Nov 14, 2009, 10:20 AM from IP address 66.67.158.212
for '89-'03. Front and Rear--they came off a '97 Sporty when one of the exhaust pipes started to smoke--burned valve off the rear head. So, they need valve work--nothing too suprising. Natural finish. $120 + $25 shipping to anywhere in the USA. I take Paypal at the above link addy. In Oceanside, CA. Email or leave a mess. here. Thanks!
.
.
.
.
.
What's a Liberal's definition of a racist?
--A Conservative winning an argument.
Posted on Nov 13, 2009, 9:42 PM from IP address 207.200.116.73
set of wheels with tires and pulley nice shape no gouges both 16in rear has 160 tire front has 130 good bearings 250 shippedor make offer I will never use these but they are nice.
Posted on Nov 13, 2009, 9:32 PM from IP address 24.98.129.230
This bike started out as an FXR but frame was damaged. It now sits on Santee frame. Top end gone through with 6000mi on it now....and counting. wiesco pistons 10-1, 10 over, andrews ev27 cam, S&S super E. Trans has all new seals (small chip in case but is not compromised.. 4500.00 firm. I am in Brownsburg IN. e-mail me at jzajicek35@hotmail.com with questions. Bike has 2 seats and 2 tanks that interchange (seats are pictured...other tank is 4.7gal) Bike is all powder coat and looks good.
I have 2 sets of later model floorboards
the pair on the right are take offs from a dresser
the left is off a 71 FLH
$30 get them delivered to your house
Posted on Nov 13, 2009, 5:52 PM from IP address 71.80.8.50
Got a lot of parts to sell so I can finish the wife's shovel so I can get to work on my pan
2 sets of Pan floorboards
1 aftermarket
1 oem
$75 shipped
flannel shirt not included
Posted on Nov 13, 2009, 5:22 PM from IP address 71.80.8.50
Want to buy fuel injected tank and rear fender for 06 softail standard. Dont care about paint but no dents etc....
I have a full set of vivid black... willing to trade plus cash or sale. Planning on flat black paint job and just cant justify painting over a good factory paint job.
Wood
SFFS
Posted on Nov 13, 2009, 3:08 PM from IP address 63.241.148.2
Another part from a rich guy who scraped his tank and just HAD to have new one. Take a look at the pics--two scuffs on the right-side front--not too bad but needs painting. I'm no expert, but I think it's restore-able. Otherwise, it's in pretty decent shape. They want crazy money from the factory and aftermarket companies for these. I'm selling it for $125 + $25 for shipping anywhere in the country. I take Paypal at the address link above. E-mail if interested or leave a response here. Located in Oceanside, CA. Thank you! Axle
.
.
.
.
.
What's a Liberal's definition of a racist?
--A Conservative winning an argument.
Posted on Nov 13, 2009, 2:06 PM from IP address 165.24.253.150
looking for a 4spd ratchet trans with electric start mounting ears on the back of the case
just need a complete trans in good working condition
im not interested in anything with cracked cases etc.
if you got anything please email me at blkstang0321@yahoo.com
thanks
Posted on Nov 13, 2009, 1:50 PM from IP address 69.112.155.157
DR650? what year? GS650? What year?
Without that information the odds of you getting the right carb body are very slim, even if it is off of a 650 Suzuki.
Think of if you asked for a 80 inch Harley carb body. Well, is that Flathead, Shovel or Evo? Is that Butterfly Keihn, Tillotson, CV Keihn, Zenith, Linkert?
" "
Posted on Nov 13, 2009, 6:00 PM from IP address 24.220.248.59
04 AIH Texas Chopper frame, swingarm, gas tank, oil tank, rear fender. It's a 240 LSD softail. Has fire damage so needs to be sanded and repainted. Have salvage title
$2500 cash firm no trades..
Alsohave a brand new ultima 113 I bought for it.Natural finish chrome boxes,cam cover etc..Never ran.Take 5000 for the the package
Posted on Nov 13, 2009, 11:37 AM from IP address 68.47.230.20
I have an '81 CB-900 for sale in Gastonia NC. The motor is locked up, but it does have a clear title. I had bought this as a project believing the seller that it only needed a coil. (I should have checked to see if the motor would turn over first) I completely tore the carbs down, soaked them in parts cleaner, and reassembled them, so the carbs are in great shape.
The tires are in great shape also, and have no dry rot. The chrome is in goood shape. I also have the plastic side covers, a nice seat, and a gas tank. (I will send pics of those if you want them)
The bike is factory, so it has all the factory stuff on it. It is only missing a battery and air filter (air box assembly is all there)
This bike has the "10 speed" transmission and shaft drive. Front dual disc and rear disc brakes.
$500 firm.
I can help with delivery depending on where you are
Posted on Nov 13, 2009, 10:59 AM from IP address 70.147.156.83
chrome turbo, header ,exhaust, plenum, boost gauge,+blower/turbo grind cam was mounted and worked great on a Shovel with one pc early Superglide tank, would also clear Sporty tank, maybe 3.5 bobs, use on 74 ,80 +larger engines,good on all ,best on big bore w stock 74 stroke,worked with Bendix and SU carbs, I have aged this for years, still in great shape, not state of the art, but very cool looking and worked fine, may trade for BoardTrack syle frame, or $1200 + ship from 80101(eastern Colorado) Email for pix, Thanks!
Posted on Nov 12, 2009, 11:49 PM from IP address 207.171.193.23
Might not be the place to dump these off but old shop went out of business have these layin around... they are all used and were not sittn on the shelf collecting dust. $12 each to your door (usa). if ya buy more then one it goes to $10 a piece. take em all for $165 sorry no harley manuals mostly dirt bike and some cruisers...all manuals are from kawasaki except where noted.
these were used on a 2005 superglide for 1 year before the bike was traded for a dresser. cant use them on a dresser so they have to go!
tjhese should fit any modern evo harley davidson superglide, lowrider, softtail and sportster or custom chopper or bobber.
they will directly bolt on narrow glide front end and will fit mid and wide glide with spacers...
they are powder coated black and in excellent shape. i have original boxes and packing materials
they were bought new and they cost 1400.00. have receipt for warranty.
first 800.00 OBO gets a heck of a deal on these wheels.
please no spam or email gathering emails, please indicate what bike your emailing about to get my response.
jason 412 512 6936
images of wheels below
Posted on Nov 12, 2009, 5:14 PM from IP address 24.131.197.153
the front is 21x2.15 and rear is 16x3.5
these are nice wheels, i wantthem for myself but not building a HD for a while, too busy with trumpet stuff!
these are my brothers, hes not much for internets.
thanks man!
jason
Posted on Nov 13, 2009, 5:46 PM from IP address 24.131.197.153
Still have literally hundreds of parts I am trying to sell. If the price appears too high, make me an offer. Bear in mind shipping is expensive, AND SHIPPING IS INCLUDED TO LOWER 48 ALWAYS. Used FXR Lepera daytona seat, has a rub mark on the back with an S&S patch over it $80 shipped Used FXR saddlebag standoffs need polished up $20 shipped Vance & Hines 2 into 1 pipe and removable baffle, has some scratches $30 shipped Used softail low profile seat worn but usable $40 shipped CHROME starter FRESH PROFESSIONAL REBUILD came out of big inch EVO, has not been used since rebuilt, needs polished $55 shipped Custom swoopy tank with hand painted JD graphics, has a leak wear shown in picture, I have had this on wall of shop for a few years cause the painting is awesome, so selling it as art, black base is powdercoat reasonable shape otherwise $90 shipped Mikuni air cleaner with K&N filter $20 shipped Professionally recovered lepera softail/rigid seat, leather with memory foam, this sucker is comfortable for sure, softail side tabs removed $85 shipped Thanks for looking
Regards, Nicko
Beaufort SC
Posted on Nov 12, 2009, 2:45 PM from IP address 71.54.153.106
Hey Nick,I'll send USP MO for the breather.Send me an e with your address.I've done business with you before but have had computer problems and lost a lot of addresses.
Posted on Nov 12, 2009, 9:16 PM from IP address 68.159.115.181
34k miles out of a dresser it is a 1994 evo motor, was going to use it but got a deal on a S&S so its up for sale no damage it was running when pulled still has the spark plugs in it. it will come with a copy of the title and the numbers written on a bill of sale. $1400 shipped lower 48 the chrome loks like new and the black powder is in great shape. pick up is also available if you prefer for $1300.00 call 703-973-2013 Dave
Posted on Nov 12, 2009, 1:49 PM from IP address 24.98.129.230
anyone have a 1950 pan motor, basket case or complete bike with a clear title for sale at a down to earth price? prefer fl but will consider el. should have matching #'s. thks, joe in ormond beach,fl
Posted on Nov 12, 2009, 1:15 PM from IP address 67.35.153.62
I was actually just geting ready to list...50FL..Matching cases,matching date coded heads,stock wishbone
choice of front ends..and sheetmetal..dis-assembled...e me direct if your intrested...
Posted on Nov 12, 2009, 8:24 PM from IP address 208.53.80.20
300/ plus shipping from 03051, lower 48. or trade for a generator for the house. flywheels and indacators not included. works the balls, I just don't need two
[IMG][/IMG]
when the going get wierd, the wierd turn pro
Posted on Nov 12, 2009, 12:36 PM from IP address 205.188.117.73
ID # 3c11153H1
the number on the engine matched 3c11153H1
SELL FOR A FRIEND WITH STAGE 4 CANCER JUST TRYING TO HELP HIM OUT
Runs Great NO title but will come with bill of sales
Add a tail/break light and it would be street legal could use some cosmetics done to her as seen in pics
Location Martinsburg WV
Asking $1,000.00 (VERY NEGOTIABLE) OBO PLUS SHIPPING OR WILL HOLD FOR PICK-UP
Dutch
NEW HERE FIRST SALE ON HERE I DO NOT SELL STUFF REGULARLY
Posted on Nov 12, 2009, 10:32 AM from IP address 24.126.16.228
For helping out your friend in a time of need. I too am fighting Stage 4 (lung) cancer and I can assure you that you are appreciated by your buddy. Good friendship is STRONG medicine! Good luck to him and his family, to you and yours, and in selling the scooter.
Posted on Nov 12, 2009, 11:16 AM from IP address 76.18.159.53
I thank you for your support and am very sorry to hear you are going through the same thing as he is. He is more like a Brother to me so I will do what ever it takes to help him anyway I can. He will be leaving behind a son and wife. I know it won't be long now for him because he is at the point he can not control his bowels and is getting very very upset with himself. I know for the years I have known him he would do anything for anyone that was or is in need. I hope you have friends like him. I know that he still trie to help others and put himself aside. I love him for that but I also think he is a bone head for that too!
Dutch
Posted on Nov 12, 2009, 12:29 PM from IP address 24.126.16.228
it came out of my 79 shovel I'm putting in a Flyrite frame I no longer need it i have a 5 speed now i also have a 79 primary needs to be powder coated and a couple clutch hubs and baskets if anyone wants them in in Dallas Tx the trans is 400 plus shipping it has around 10,000 miles on the trans not certain because i have never had a speedo I'll send pics on request thank Jason from Texas
Posted on Nov 12, 2009, 10:22 AM from IP address 208.189.74.214
Re: 4 speed trans kick electric with kicker and starter
by NAME/PRICE/LOCATION (Login TEXASSHOVEL) Horsemen
NOW BOTH ARE CHAIN DRIVEN I HAVE A NEW ONE LESS THAN 100 MILES ON IT DO YOU WANT THE CLUTCH,CLUTCH TAMER AND PRESSURE PLATE AND SPRINGS OR JUST THE HUB AND BASKET?
Posted on Nov 12, 2009, 1:50 PM from IP address 208.189.74.214
donny got the trans but i still have the whole primary for the 79 shovel for sell 200 plus shipping it includes inner, outer, clutch, clutch hub, clutch basket, comp sprocket, chain, tensioner, pressure plate and 12 springs. Everything but the clutch its self has less than 500 miles on it.
Posted on Nov 12, 2009, 8:08 PM from IP address 70.41.93.214
Donny got the trans but i still have the whole primary for the 79 shovel for sell 200 plus shipping it includes inner, outer, clutch, clutch hub, clutch basket, comp sprocket, chain, tensioner, pressure plate and 12 springs. Everything but the clutch its self has less than 500 miles on it.
Posted on Nov 12, 2009, 8:09 PM from IP address 70.41.93.214
Ill take 1300.00 Bottom dolar or trade. Im sick of this bitch come get it.Had a hundred want it but no dinero.Had the money sold fifty different times.37912
Posted on Nov 12, 2009, 2:12 AM from IP address 68.47.230.20
I would like to have it for a spare, but as you can see they are very soft market,poor quality control, bad rep will come up with a trade why don't you Email me
Posted on Nov 12, 2009, 12:20 PM from IP address 207.171.193.23
Ive had lots of offers and it may be soft market or whatever etc but when it comes to trading I gotta get dollar for dollar.What have you got.?
It aint eating nothing and Im not broke but really want to move it cause its a sore subject between me and a friend here but you gotta offer a trade worth what its worth.A bunch of people want it but everyone wants the title and frame.That aint happenening.Im using the neck and title..What you got to trade??Or just but it outright?
Posted on Nov 13, 2009, 9:45 AM from IP address 68.47.230.20
Forgot they had several different clutch setups, I'm still a newbie with these things, gonna learn the HARD way on this one, especially after what I found yesterday...
Posted on Nov 12, 2009, 11:31 AM from IP address 71.74.224.231
®
![[linked image]](http://img.auctiva.com/imgdata/2/6/6/4/9/9/webimg/321036146_o.jpg)
![[linked image]](http://img.auctiva.com/imgdata/2/6/6/4/9/9/webimg/321036167_o.jpg)
![[linked image]](http://img.auctiva.com/imgdata/2/6/6/4/9/9/webimg/321036185_o.jpg)
![[linked image]](http://img.auctiva.com/imgdata/2/6/6/4/9/9/webimg/321036207_o.jpg)
![[linked image]](http://www.network54.com/Realm/tmp/1258240297.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258239627.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258233481.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258233136.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258228344.JPG)
![[linked image]](http://farm3.static.flickr.com/2556/4103428756_0f3ab04186.jpg)
![[linked image]](http://farm3.static.flickr.com/2607/4103428850_666fa8c257_o.jpg)
![[linked image]](http://farm3.static.flickr.com/2444/4065818663_c47aa4ff86.jpg)
![[linked image]](http://farm3.static.flickr.com/2655/4094121652_8b70606687_o.jpg)
![[linked image]](http://farm3.static.flickr.com/2741/4028829591_72ff3bcf94_m.jpg)
![[linked image]](http://img.photobucket.com/albums/v623/ULH/IMG_0019.jpg)
[/IMG]
![[linked image]](http://i236.photobucket.com/albums/ff117/olddaze/dirtbikeswing-arm.jpg)
[/IMG]
<br
![[linked image]](http://i692.photobucket.com/albums/vv285/dtd77_photos/v54fb.jpg)
![[linked image]](http://i692.photobucket.com/albums/vv285/dtd77_photos/photo2.jpg)
![[linked image]](http://i692.photobucket.com/albums/vv285/dtd77_photos/photo.jpg)
![[linked image]](http://i147.photobucket.com/albums/r285/japjohnny/IMG_1287.jpg)
![[linked image]](http://i147.photobucket.com/albums/r285/japjohnny/IMG_1226.jpg)
![[linked image]](http://www.network54.com/Realm/tmp/1258152675.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258150863.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258127898.JPG)
![[linked image]](http://i441.photobucket.com/albums/qq140/Isayisyboy/1112091925.jpg)
![[linked image]](http://i36.photobucket.com/albums/e9/jsunstar/th_CIMG9907-1.jpg)
![[linked image]](http://i36.photobucket.com/albums/e9/jsunstar/th_wheel.jpg)
![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0019.jpg)
![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0023.jpg)
Used FXR saddlebag standoffs need polished up $20 shipped ![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0025-2.jpg)
Vance & Hines 2 into 1 pipe and removable baffle, has some scratches $30 shipped ![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0003-3.jpg)
Used softail low profile seat worn but usable $40 shipped ![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0014-3.jpg)
CHROME starter FRESH PROFESSIONAL REBUILD came out of big inch EVO, has not been used since rebuilt, needs polished $55 shipped ![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0029.jpg)
Custom swoopy tank with hand painted JD graphics, has a leak wear shown in picture, I have had this on wall of shop for a few years cause the painting is awesome, so selling it as art, black base is powdercoat reasonable shape otherwise $90 shipped ![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0004-3.jpg)
![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0005-1.jpg)
![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0008.jpg)
Mikuni air cleaner with K&N filter $20 shipped ![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0010-1.jpg)
Professionally recovered lepera softail/rigid seat, leather with memory foam, this sucker is comfortable for sure, softail side tabs removed $85 shipped ![[linked image]](http://i893.photobucket.com/albums/ac136/nickcdn30/IMAG0032-1.jpg)
Thanks for looking
![[linked image]](http://i692.photobucket.com/albums/vv285/dtd77_photos/evomotor3.jpg)
![[linked image]](http://i692.photobucket.com/albums/vv285/dtd77_photos/evomotor4.jpg)
![[linked image]](http://i692.photobucket.com/albums/vv285/dtd77_photos/evomotor5.jpg)
![[linked image]](http://i692.photobucket.com/albums/vv285/dtd77_photos/evomotor.jpg)
![[linked image]](http://i41.photobucket.com/albums/e258/nhchopperbob/partstoolsforsale001.jpg)
[/IMG]![[linked image]](http://www.network54.com/Realm/tmp/1258039232.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039146.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039155.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039165.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039176.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039184.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039193.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039201.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039209.JPG)
![[linked image]](http://www.network54.com/Realm/tmp/1258039217.JPG)
