Return to Index  

Trumpeter Swordfish

November 3 2009 at 3:08 AM		Ian Miller  (Login windy44)
HyperScale Forums
from IP address 90.201.95.120
Here is my Trumpeter Swordfish, this was built straight from the box and was an absolute nightmare to get the rigging right. The metal they used for the rigging is that hard it would not cut, I ended up using a cut off wheel in my dremel. This was done as a commission build so I had to perservere otherwise it would have been put away or trashed. In the end I still was not happy with it, luckily the customer was.

[IMG][linked image][/IMG]
[IMG][linked image][/IMG]
[IMG][linked image][/IMG]
[IMG][linked image][/IMG]
[IMG][linked image][/IMG]
[IMG][linked image][/IMG]

Comments are more than welcome....

 
 Respond to this message   
Responses

Posting or replying to messages on Theme Pix requires visitors to register. If you have not already registered on one of HyperScale's other Forums, you will need to:

  1. First register with Network 54, the Forum provider.Click here to register with Network 54.

  2. Then, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.