Hi !
Here an update on the various WIP in 1/48 scale I'm on now :
SWORD 1/48 NORTHROP N9M FLYING WING :
This one is completed , here the link to view the project :
http://picasaweb.google.com/102095495751964616172/N9MNorthropJeanMarc?gsessionid=Zgw9rk4FINFwfoEFSLHg_A#
SCRATHCBUILT 1/48 CANADIAN SPARROW II TEST RIG # 1
This project is completed, now I have to put some time on the 2 other project from that particular serie, here the link where you can view the complete project :
https://picasaweb.google.com/102095495751964616172/MissilesSPARROW#
FINE MOLD / HOUSE MODIFICATION 1/48 STAR WAR R2D2 :
This project is almost over, I have modified the legs and detail them , add on some small photo-etched to the body , open an side bay and display it open with an scratch arm, redone , add some thickness to the dome to have the proper shape, redone the 3 lens , open one of the top hatch and scratch the extanded detail finaly what left , Is to find the FINE MOLD R2D2 decal cause I have lost mine , so if someone as the X-WING kit and can scan me the R2D2 decal part that would put an end to this project
SCRATCHBUILT 1/48 BLACK BRANT I SOUNDING ROCKET :
This project is almost completed, the rocket is complete and the stand also ,what left is to scratch the decals,and add some small detail, here the direct link where you can view the project :
https://picasaweb.google.com/102095495751964616172/BlackBRANT#
ITALIERIE / SCRATCH 1/48 F-4 PHANTOM II EJECTION SEAT TEST RIG :
The F-4 forward section is completed and ready to glue to the rocket slay,I,m almost true with the seats , one will be display inside the cockpit and the other one outside on a dolly,Those should close to be complete this week, than I'll be putting some time to repair the base and complete the detai,here the direct link where you can view the project :
https://picasaweb.google.com/102095495751964616172/F4PHANTOMII#
SCRATCH 1/48 CF-105 ARROW FLIGHT SIMULATOR DIORAMA :
Thanks to 'BY ASFORD SMITH' who provided me with 2 DMLA 1/48 KITCHEN seat from the LUFTWAFFE set ,I done them and add some detail otha chairs, I also have scratch the 2 desk chairs and display them in the dio,what left to be done is 2 large computer with a working table, also an airdoc to be display close to the side wall and finaly I have to find an 1959 calander so I can display it on the armoir in the back here the link where you can view this project :
https://picasaweb.google.com/102095495751964616172/SimulateurDeVolArrow#
TOMICA / SCRATCH 1/50 TOYOTA TOW TRUCK 1950 / 1960 era :
This project is close to be completed,cabin as been redone and just need to add some small detail , here the link where you can view it :
https://picasaweb.google.com/102095495751964616172/TOYOTATOWTRACTOR#
SCRATCH BUILT 1/48 1930 ERA MARITIME SITE SEEING PLATEFORM :
After a while ,I came back to it, main work was already done, and I have completed the engine area , what left is to re-adjust the engine housing, glue rust and glue in place the Exhaust,scratch the cabin ,bench park seats,and railing, the chain for the track will be done later , I'm awaithing for Mike West who gracully aggreed to cast some for me , here the direct link where you can view the project :
https://picasaweb.google.com/102095495751964616172/PlateformeAmphibie#
I also have a couple of 1/48 side project that I,m working on from time to time ,like REVELL B-1A PROTOYPE MODIFICATION, MOON LEM ,AVRO SILVERBUG,BENSEN B.12 SKYMAT,WWII US DINGHY etc.. Pick are added on a weekly/bi-weekly base ,dependng when Steph can take care of them ,you can view all those and more at this URL :
http://pages.videotron.com/jmarcpe/project%20automobile.htm
Hope youl'le like them !
Jmarc
