Thanks for your comment... You can see all the build on the Heavyplastic's forum. You have to register but you'll access to one of the best French aircraft forum...
http://www.forum.heavyplastic.com/index.php?topic=629.0
I had a look on Your thread, and it was very good step-by-step. The fact is that I thought the metal finish is poished metal laquer, like alclad. On the photos it really tricked me. Of course it does not take away anything from the quality of the work!
I am planning a Ki-43 from Hase with the same mottled green over natural metal finish. That will be 1:48 scale. Do You think that this tamiya paint would look the same realistic than on Yours? (scale effect) That would make my life easier...
The site is quite good, and it is a huge help to me that there is translated version. Unfortunately, I can't speak French, however, it wasn't a problem when I found a model shop in Paris..they were extremely friendly to help me out. (Gosh, how much I left there... )
Peter Olsen (Login polsen) HyperScale Forums 58.179.123.165
Hi Ludovic
November 2 2009, 8:41 PM
Thats just Fantastic, great work !!! I love the paint chipping on the cowl !!! I look forward to seeing more of your work here, all the best cheers Pete.
Quelle belle réalisation, superbe travail de peinture et de patine et que dire des photos splendides en fait. Félicitations Ludovic et bienvenue sur Hyperscale..
Serge Dompierre
This message has been edited by erreipmod from IP address 24.37.45.234 on Nov 3, 2009 7:51 PM
Great thank you for your comments. I do not know if you can get it everyhere you are, but an article in English language is under development for the magazine SAM. It should appear in two or three numbers. For those who speak French, you can try to get my article in the magazine WingMasters 73.
In the future, I'll try to be more present on Hyperscale. The major problem is my English, not the best...
Posting or replying to messages on Theme Pix requires visitors to register. If you have not already registered on one of HyperScale's other Forums, you will need to: