<< Previous Topic | Next Topic >>Return to Index  

B-58 Continues

May 4 2013 at 2:49 PM

John Ezzo  (Login johnezzo)
HyperScale Forums
from IP address 173.71.74.172

Work continues on my Monogram 1/48 B-58.
The tail is finally on. I needed the tail off until I finished the mounting holes for the engine nacelles.
The resin flaps are being test fitted. They are from Fisher Model and Pattern. I've never heard of this company until I stared this project.
[linked image]

[linked image]
Engine nacelles will plug in to aluminium tube sockets.


[linked image]
I picked up the SAC metal landing gear but they look to me to be exact copies of the Monogram offerings. So I'm using the kit landing gear because the plastic is easier to clean up.
This was not the case with the B-29, the SAC gear was better.
The camera angle makes it appear that the SAC gear is smaller but they are the same size.

Once again, thanks for looking.
John E.

 
 Respond to this message   
AuthorReply

Chris C
(Login cwc11)
HyperScale Forums
8.26.98.30

Looking good so far John.

May 4 2013, 5:49 PM 


 
 Respond to this message   

David Hansen
(Login Falcon50EX)
HyperScale Forums
69.168.48.109

Looks good, John!

May 5 2013, 12:22 AM 

Check photos carefully for the elevons. They drooped but not quite that much.

How did the aluminium sockets work out??

d-smack

 
 Respond to this message   

Randy in Texas
(Login RandyinTexas1)
HyperScale Forums
72.46.223.20

It's a difficult build but you'll be prowd when it's done.

May 11 2013, 9:00 AM 

I sanded my fingernails flat on that one, and used a gallon of filler.

Randy

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Posting or replying to messages on Theme Pix requires visitors to register. If you have not already registered on one of HyperScale's other Forums, you will need to:

  1. First register with Network 54, the Forum provider.Click here to register with Network 54.

  2. Then, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

free counters