<< Previous Topic | Next Topic >>Return to Index  

Where to buy moly, seals, springs, etc for GAMO CFX

November 1 2006 at 6:50 PM
  (Login AllDownRange)

This is my first post to this forum, and I am looking for some guidance. I just acquired a GAMO CFX, and after reading a number of the posts in this forum, I am realizing that there is more to airgunning than just an airgun and pellets. You gotta love an activity that lets you tweak and improve your equipment like a lot of shooters in this forum are doing.

I got the CFX for shooting indoors this winter to help me be ready for next year's 22 rimfire silhouette shoots. So far I am finding that airgunning is more than I realized and may turn into a whole new avocation for me. The Field Trial shooting sounds especially fun. Of course if I stay involved in airguning, I will probably have to upgrade to another air rifle! Who knows? So many choices and so little time!

But back to my original subject. I read about people upgrading and doing tunes and installing aftermarket springs and seals, but I am having trouble finding places that sell the moly (that is grease, isn't it?) and all of the other things for a GAMO CFX.

Could someone point me in the right direction or give me some websites to peruse? Also, on tunes, I read about them quite a bit, and I have see the following question posed in several different forms, but is there a place that lists in a step by step process how to actually do a tune and what kind of moly and oils to use on what different parts, and what to replace or upgrade?

Thanks for any help on this subject.

One more question, are there any Field Trial shoots that take place in central Illinois?

Thanks again

 
 Respond to this message   
AuthorReply

(Login treehunter)

Some choices here...

November 1 2006, 7:04 PM 

Rich in Mich has kits, without seals


Jim Maccari has individual components also, but you would need to know exactly what you were looking for by doing a search here.

Hope this helps.


    
This message has been edited by treehunter on Nov 1, 2006 7:07 PM
This message has been edited by treehunter on Nov 1, 2006 7:05 PM


 
 Respond to this message   


(Login bigbore)
YFOT

I beleive Rich's "complete drop in kit" has a seal...

November 1 2006, 7:08 PM 

should have everything you need including lubes and a pre-prepped spring which is a REAL plus!


 
 Respond to this message   

(Login treehunter)

His kit lists no seal...nt

November 1 2006, 7:12 PM 

-

 
 Respond to this message   

(Login kenatthefarm)
YFOT

Macarri. Thats where I get my stuff. Get the hornet seal. I love Rich's CFX

November 1 2006, 7:45 PM 

port levers- solid brass. A must have for serious CFX shooters. Get some Kodiak or FTS pellets. There are no off the shelf pellets that shoot worth a damn in the CFX.

 
 Respond to this message   


(Login peterdragin)
YF

seals

November 1 2006, 8:38 PM 

I have seals they are OEM type from crossman, I have used the Hornet seal ($13.50) and the Apex ($7.95) and can find no advantage to them so I went to the crossman ($3.00 )and have had no problems.
If they are installed and fitted corectly they all seal the chamber.

 
 Respond to this message   

(Login treehunter)

Ken..........

November 1 2006, 8:46 PM 

Maybe there are no off the shelf pellets that shoot worth a damn in YOUR CFX, but mine seems happy to devour the Crosman Premier Hollow Points and spits them out nicely. Under $6 for 500, getting 7/8" groups at 40 yards with the 4x Sportview AO scope. Serial number is on the top of the barrel, which you stated was less fussy. I got these pellets at Wally Mart, they were on a peg above a shelf.

 
 Respond to this message   

(Login kenatthefarm)
YFOT

Well, yes- If you're lucky enough to have one of those barrels. I have not tried those

November 1 2006, 9:03 PM 

CHP's but will. I know they shoot bad in my other CFX. I'll get some for CSI hunter defense.

 
 Respond to this message   
ricdoug
(Login ricdoug)
YF

Schematic, ADR...

November 4 2006, 5:28 PM 


 
 Respond to this message   

(Login AllDownRange)

Thanks for the help and information!!

November 6 2006, 11:17 AM 

Thanks for the help and information!! This is a great forum!

 
 Respond to this message   
Current Topic - Where to buy moly, seals, springs, etc for GAMO CFX
  << Previous Topic | Next Topic >>Return to Index  

Click The Banner To Visit sites.

D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.