This manifold has a divider that runs from the front to the back down the middle, It has two small maybey 1 inch square holes in the divider to allow a little flow from right to left. I will be running a stock cam in this engine since I can't find anyone that makes an aftermarket cam. The pistons are 10 over with a 10.25 to 1 compression. This engine shoudn't ever see over 6000 rpm. Now the decision is what type of carbs. Should I go with matching carbs with chokes front and back or do I go with a set that is set up for dual quad? Manual or vaccum secondaries. I am not at all a carb person. Any help will be appreciated. Couple of more things that may help. Car wight about 4200 (big boat) got too love them. Automatic hydromatic (NO TORQUE CONVERTER) that should throw some people off. 2.83 stock gears out back with an open diff. Original rearend and gears. This is more for cruising and enjoying than racing, however I do like to tear it up once in a wile and I will run it out on the track on run what toy brung day.
Thanks Shane
This message has been edited by akredneck8 from IP address 72.35.114.198 on Jun 3, 2009 6:54 PM