Home > Discussion Groups > 1/48 Scale

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement

  << Previous Topic | Next Topic >>Return to Index  

Mardermania, step 3

January 11 2009 at 7:06 AM
  (Login inkisi)
Missing-Lynx members

Well here is all the mayor airbrush job done, I will start with the brushes this afternoon happy.gif

First of all, I aplied a coat of Mistersufacer (no photos of this), and after I applied a coat of grey.

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

Later I highlighted the grey,

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

And at last, the "cammo" aplied, this is my first try on a free hand painted cammo:

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

And a bonus picture of my Marder and a 1/48 Railway platform I have been painting at the same time and with the same colours as the Marder. The platform is a resin kit made by Beltcher Bits, is a great great kit, it was my first full resin kit, and everything was OK without problems.

BTW the platform and the Marder will not go together.

[IMG][linked image][/IMG]

Regards,
Jose

 
 Respond to this message   
AuthorReply

(Login domingohm)
Missing-Lynx members

Good Star jose

January 11 2009, 6:42 PM 

now is time to finish this beatiful grey Marder. Excellent work.


 
 Respond to this message   

(Login davedu57)
Missing-Lynx members

good start José.....

January 11 2009, 7:56 PM 

...and now please, gon on with the weathering !!!


Cheers,
David

 
 Respond to this message   

(Login GregHessig)
Missing-Lynx members

Off to a great start. Go like the wind! nt

January 11 2009, 10:40 PM 

happy.gif

 
 Respond to this message   


(Login jadeso)
Missing-Lynx members

Nice Camo Jose Manuel!!!

January 12 2009, 3:44 AM 

This contest is wondeful to see several and very different schemas.

And I love yours.

The railway plataform was used for heavy tanks, so I can see this is a bit big for a Marder.

Best Regards!!!

 
 Respond to this message   

(Login SvenFrisch)
Missing-Lynx members

Nice camo !!! n/t

January 12 2009, 7:19 AM 

.

 
 Respond to this message   

(Login inkisi)
Missing-Lynx members

Thanks a lot for the comments, n/t

January 13 2009, 9:01 AM 

Regards,
Jose

 
 Respond to this message   
Arnaud Brejon
(Login arbrej)
Missing-Lynx members

Sorry Jose!

January 18 2009, 5:15 AM 

I am so late!I am sure your nice model is now nearly finished!
Arnaud.

 
 Respond to this message   
Current Topic - Mardermania, step 3
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse