Home > Discussion Groups > 1/48 Scale

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47210&messageid=1113823253
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

Advertisement

  << Previous Topic | Next Topic >>Return to Index  

Panther A

November 29 2016 at 3:57 AM
Tony Ormandy  (Login Tony_M_Ormandy)
Missing-Lynx members

Hi all
Fist,thank you to you all who came to my help about the grills.
Now I am looking for spare wheels for a Panther A but a late ones will be all right. The Tamiya Panther and Jagdpanther kit has no spare wheel,I do not want to buy one of the kit for 2 wheels,so please can some one help me out here who makes spare wheels ?

Thank you
Tony


    
This message has been edited by Tony_M_Ormandy on Nov 29, 2016 5:15 AM


 
 Respond to this message   
AuthorReply
Andrew Deeley
(Login deeley)
Missing-Lynx members

Re: Panther A

November 30 2016, 4:32 AM 

Hi
None to my knowledge.

Maybe worth buying one the resin casting starter sets. A Panther wheel would be a good item to try for first time two part moulding. However the sets are about the cost of a kit.

Alternatively you could ask on Track48 or 1/48 FB page run by Lu ( link below in his post) as there are more dedicated 1/48 modellers on these.

Sorry not much help.


 
 Respond to this message   
Tony Ormandy
(Login Tony_M_Ormandy)
Missing-Lynx members

Thanks Andrew

December 2 2016, 12:33 AM 

Hi Andrew
Thanks for that, looks like I will have to buy a kit.
Big thanks
Tony

 
 Respond to this message   
Paul McMahon
(Login Paul_McMahon20)
Missing-Lynx members

Have no fear.....

December 3 2016, 9:05 AM 

Tony a helping hand is here happy.gif

Send me your shipping address to polmac20ATgofree.indigo.ie ( remove the AT and include Panther in the email header ) and I will get the wheels off to you next week happy.gif

Best regards

Paul


 
 Respond to this message   
Tony Ormandy
(Login Tony_M_Ormandy)
Missing-Lynx members

Panther wheels

December 3 2016, 9:09 PM 

Hi Paul
That is very nice of you, e-mail sent.
Thank you
Tony

 
 Respond to this message   
Paul McMahon
(Login Paul_McMahon20)
Missing-Lynx members

Email received...AND NOW....

December 4 2016, 3:41 AM 

and the wheels will be on their way to you this week Tony happy.gif

Best regards

Paul

p.s Tony , just back from the Post Office - the wheels are on their way happy.gif Good luck with your Panther Project happy.gif


    
This message has been edited by Paul_McMahon20 on Dec 5, 2016 5:25 AM


 
 Respond to this message   
Tony Ormandy
(Login Tony_M_Ormandy)
Missing-Lynx members

Out standing person alert

December 13 2016, 12:23 AM 

Hi Paul
I cannot thank you enough for your help and supplying 4 wheels 2 inside and 2 out side and spare track
links.
Thanks mate.
Tony Ormandy

 
 Respond to this message   
Paul McMahon
(Login Paul_McMahon20)
Missing-Lynx members

Delighted to hear...

December 13 2016, 8:29 PM 

that the letter made its way safe to the other side of the world in time for Christmas Tony wink.gif

Glad to be of help and hope to see your Panther finished at some stage in the future happy.gif

Best regards

Paul

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse