Airgun Metal Working Forum

Forum Rules
Shop Safety (READ)
click for YELLOW Forum
Dedicated to Airgun Metal works

Metal Working Links

Visitors in this forum in the last 10 minutes: 5 Visitors
libertyman777, 4 guests

Not logged in | Login | Create Account

Search Post now!

Figured it outl. --> Expand Thread - Paul O. on May 24, 2013, 3:03 PM

Fill port --> Expand Thread - Roy on May 19, 2013, 12:19 PM

H-F Mini Mill deal alert --> Expand Thread - Anthony R on May 17, 2013, 10:15 AM

have a link to machine - robny on May 19, 2013, 3:55 AM

Yup - Anthony R on May 19, 2013, 11:05 AM

have a link to machine - robny on May 19, 2013, 3:55 AM

Machining question... I think --> Expand Thread - Rob in NC on May 13, 2013, 1:05 PM

That should work fine, as long as the insert can't move out of position. hth n/t - james perotti on May 13, 2013, 2:27 PM

you'll need two pieces... - DaveG on May 14, 2013, 8:43 AM

Definitely need a spool ... - knt on May 14, 2013, 10:09 AM

Thanks for the responses - Rob in NC on May 15, 2013, 9:30 AM

Another option - Casey in San Diego on May 16, 2013, 5:12 PM

also, small screw - robny on May 19, 2013, 4:08 AM

ID O-Ring Slot Cutter ... --> Expand Thread - knt on May 6, 2013, 9:07 AM

These are very nice - Cal on May 6, 2013, 10:33 AM

Thanks, those do look nice ... - knt on May 6, 2013, 1:05 PM

how do you even get a cutter inside the barrel? - Jon B. on May 6, 2013, 1:19 PM

On those small bores, I just use a drill shank - Cal on May 7, 2013, 8:11 PM

www.internaltool.com - Jim Gaska on May 6, 2013, 5:16 PM

Wound up buying a set of these ... - knt on May 7, 2013, 11:09 PM

Iscar Picco tools - Bryan Enoch on May 6, 2013, 10:26 PM

Wow - Jon B. on May 7, 2013, 1:52 PM

Barrel adaptor --> Expand Thread - Coldking on May 4, 2013, 1:33 PM

Hardware store, plumbing isle? - Bryan Enoch on May 5, 2013, 9:49 PM

I think he's looking for - Anthony R on May 6, 2013, 10:04 AM

if its long enough would it matter ?? - robny on May 8, 2013, 10:59 PM

Email me - Jim Gaska on May 6, 2013, 5:17 PM

Anyone able to make a Daystate single shot tray like this.... --> Expand Thread - ERdept on May 2, 2013, 7:04 PM

I could ... - knt on May 3, 2013, 11:49 AM

So, do you have a pic or example of your work. Can be whatever you REASONABLY want for it. - ERdept on May 3, 2013, 6:39 PM

I was actually suggesting ... - knt on May 6, 2013, 9:03 AM

did not hear back, so found this one from Europe, thank you! - ERdept66 on May 7, 2013, 5:36 PM

CNC shop for custom scope rail --> Expand Thread - Casey in San Diego on Apr 12, 2013, 3:13 PM

CAD - Gordon on Apr 12, 2013, 10:09 PM

Hi Gordon - Casey in SD on Apr 13, 2013, 1:15 AM

Micro-lux 14 in lathe --> Expand Thread - Peter on Apr 12, 2013, 9:54 AM

Price reduced - Peter on May 12, 2013, 1:22 PM

SOLD - Peter on May 14, 2013, 2:06 PM

I love collet blocks, 5c --> Expand Thread - Jon B. on Apr 10, 2013, 1:19 PM

Now you need a Spin Index...Then you're all set....nt - Art Deuel on Apr 10, 2013, 1:55 PM

Its on my wish list!!!! nt - Jon B. on Apr 11, 2013, 7:04 PM

I agree, they're simply magical.... - Derek G on Apr 28, 2013, 9:51 PM

Mini Mill and Lathe question for Machinist's --> Expand Thread - Greg on Apr 7, 2013, 10:45 PM

mini mill and lathe - DaveG on Apr 8, 2013, 7:42 PM

RE Mill and Lathe - Greg on Apr 8, 2013, 10:56 PM

aluminum alloys - DaveG on Apr 9, 2013, 5:57 AM

Good rule of thumb- - Ben W on Apr 11, 2013, 8:01 AM

Re, Rule of Thumb - Greg on Apr 11, 2013, 7:15 PM

Re: Re, Rule of Thumb - Ben W on Apr 12, 2013, 9:43 AM

clausing lathes - robny on Apr 15, 2013, 9:45 PM

RE Clausing Lathes - Greg on Apr 16, 2013, 12:28 AM

Well......Grizzly also offers this South Bend lathe that I was very....... - Ed Canoles on Apr 17, 2013, 3:35 PM

Re: Well......Grizzly also offers this South Bend lathe that I was very....... - Chris t on May 12, 2013, 9:07 AM

My 10K Southbend lathe - Tom on May 22, 2013, 9:42 PM

Been thinking of plagiarizing some of the TX200 piston features...... --> Expand Thread - Ed Canoles on Apr 1, 2013, 9:33 AM

Same/straight across/nt - GeraldinGa on Apr 1, 2013, 10:26 PM

Thanks! So the straight TX trigger latch is actually bearing on........ - Ed Canoles on Apr 2, 2013, 9:02 AM

Is the issue regarding the latch rod if the sear neads to go "half way"? - Cal on Apr 2, 2013, 11:51 PM

Re: Been thinking of plagiarizing some of the TX200 piston features...... - Scott Hull on Apr 2, 2013, 1:18 PM

Well.......I thought so too till I took............. - Ed Canoles on Apr 2, 2013, 8:18 PM

Now I see what you mean. - Scott Hull on Apr 2, 2013, 9:08 PM

Keep in mind the TX piston is made to freely rotate.. so it needs - , on May 13, 2013, 1:22 AM

3D milling 2240 grip on a "toy" --> Expand Thread - Ben W on Mar 21, 2013, 2:12 PM

Very cool ... - knt on Mar 21, 2013, 4:13 PM

Re: Very cool ... - Ben W on Mar 21, 2013, 8:04 PM

Looks Good!! - Bret on Mar 21, 2013, 8:31 PM

Ben - Eddie on Mar 24, 2013, 2:35 PM

Re: Ben - Ben W on Mar 24, 2013, 10:58 PM

Lathe and mill use for springers --> Expand Thread - Casey in San Diego on Mar 20, 2013, 11:43 AM

Check out Nick Carters blog pages - Jon B. on Mar 20, 2013, 12:43 PM

Quick and dirty survey here --> Expand Thread - Jon B. on Mar 18, 2013, 1:30 AM

Dials, mill and lathe. nt - Ed Canoles on Mar 18, 2013, 8:11 AM

DRO..mill..& part time on lathe n/t - Anthony R on Mar 18, 2013, 10:44 AM

Dials, mill and lathe...nt - Dave Dunn on Mar 18, 2013, 11:17 AM

David Mizell - David Mizell on Mar 18, 2013, 1:49 PM

Survey Says... - Gordon on Mar 18, 2013, 7:18 PM

DRO's Mill and Lathe - Mike Aber on Mar 19, 2013, 12:57 AM

All I can afford - Dirt Dawg on Mar 19, 2013, 1:36 AM

Dials on both.........nt - Art Deuel on Mar 19, 2013, 10:38 AM

Still dream about dro's - Jon B. on Mar 19, 2013, 11:42 PM

Dials, mill, lathe... - Lon on Mar 20, 2013, 4:32 PM

DRO on mill quill, dials on everything else... - DaveG on Mar 21, 2013, 8:23 AM

Dials on mill, lathe and metal shaper. - Tom Weigenant on Mar 21, 2013, 1:47 PM

3axis DRO on Mill - Dials on lathes - nt - Martin Orro on Mar 21, 2013, 11:04 PM

Re: Quick and dirty survey here - Chris t on May 12, 2013, 9:09 AM

?? --> Expand Thread - FANG on Mar 13, 2013, 10:14 AM

METAL LATHE --> Expand Thread - FANG on Mar 11, 2013, 4:18 PM

Its all about budget - Jon B. on Mar 12, 2013, 12:21 AM

craigslist daily search..nt - robny on Mar 12, 2013, 4:02 AM

Not just budget... - Dave Dunn on Mar 12, 2013, 12:17 PM

LATHE - FANG on Mar 12, 2013, 5:23 PM

lookks very much like the micromark - lux lathes - robny on Mar 14, 2013, 1:50 AM

This is what I ordered recently - Mike Aber on Mar 13, 2013, 2:55 AM

SWEET - FANG on Mar 14, 2013, 8:10 AM

WOW....a "real" lathe! I do wish I could afford some "heavier iron"..... - Ed Canoles on Mar 15, 2013, 9:32 AM

My Smithy - Mike Aber on Mar 16, 2013, 6:59 AM

I have a southbend heavy 10. Works good if you can find - Oldfield on May 3, 2013, 3:29 AM

Re: METAL LATHE - Chris t on May 12, 2013, 9:53 AM

mind bending home made manual tranny lathe --> Expand Thread - robny on Mar 6, 2013, 2:55 PM

Need help with a chinese lathe..the half nut mechanism has gone wacko --> Expand Thread - scot laughlin on Mar 5, 2013, 1:39 PM

hard to say for sure, but... - DaveG on Mar 5, 2013, 3:59 PM

Thanks Dave...I figured I'll need to open it up, waslooking for advice on what - scot laughlin on Mar 5, 2013, 11:38 PM

don't know if you've ever been in the apron... - DaveG on Mar 6, 2013, 7:27 AM

Realy simple mechanism on this one..the apron and tool rest are just dragged down the - scot laughlin on Mar 6, 2013, 5:06 PM

The half nut is for threading, the feed for the longitudinal feed, - james perotti on Mar 6, 2013, 11:13 AM

only one feed screw on these little lathes - scot laughlin on Mar 6, 2013, 4:56 PM

Found this to be entertaining, however I don't have the "smarts".... --> Expand Thread - Ed Canoles on Feb 26, 2013, 8:05 PM

Toy machines, even when automated, do not give satisfactory results!... nt - Cal on Mar 3, 2013, 11:56 PM

Depends on your definition... - Dave Dunn on Mar 6, 2013, 11:07 AM

Linux CNC solves the 'puter issues - Cal on Mar 7, 2013, 1:06 AM

Got me, Cal... - Dave Dunn on Mar 7, 2013, 8:54 PM

having actually used one, I can say FOR SURE they give satisfactory results - DaveG on Mar 5, 2013, 4:05 PM

I agree - Ben W on Mar 6, 2013, 1:06 AM

X3 = 22XX of the machining world - DaveG on Mar 6, 2013, 7:12 AM

Re: X3 = 22XX of the machining world - Ben W on Mar 11, 2013, 9:28 AM

I watched the entire video. Didn't see any hogging going on - Cal on Mar 11, 2013, 10:30 PM

All machinists or aspiring machinists should check this out --> Expand Thread - Jon B. on Feb 26, 2013, 5:19 PM

anyone have a harrison lathe? --> Expand Thread - cody9999 on Feb 24, 2013, 2:14 PM

N/t meant to answer below --> Expand Thread - Casey in SD on Feb 17, 2013, 5:15 PM

Taking a small amount off the TX200 transfer port --> Expand Thread - Casey in SD on Feb 16, 2013, 12:32 AM

You need to be careful, the nipple needs to be pressing aganist the transfer port, - james perotti on Feb 16, 2013, 3:21 PM

So your take on it... - Casey in SD on Feb 16, 2013, 5:10 PM

I'm saying if you fiddle with the seal, don't cut it back so, - james perotti on Feb 16, 2013, 9:23 PM

Re: Taking a small amount off the TX200 transfer port - Scott Hull on Feb 17, 2013, 12:28 AM

Response and thoughts - long - Casey in SD on Feb 17, 2013, 5:16 PM

What you already measured sounds about right. - Scott Hull on Feb 17, 2013, 9:29 PM

When the compression tube is resting aganist the breech, - james perotti on Feb 20, 2013, 8:46 AM

James just so I'm clear - Casey in SD on Feb 20, 2013, 10:25 AM

Hi Casey, " I'd want the shoulder to carry the load", when - james perotti on Feb 20, 2013, 12:51 PM

Fun with Channel locks --> Expand Thread - Ben W on Feb 15, 2013, 11:28 PM

very cool! - Marmot_Militia on Feb 16, 2013, 12:01 PM

Very cool! - Derek G on Feb 20, 2013, 8:32 PM

Nice project. - Lon on Feb 22, 2013, 6:53 PM

Re: Nice project. - Ben W on Feb 24, 2013, 7:23 AM

Whats with these boring bars that have flats, that cause --> Expand Thread - james perotti on Feb 13, 2013, 12:50 PM

what are you trying to cut and what are you running it in? - cody9999 on Feb 13, 2013, 2:02 PM

Boring holes in steel on a lathe using a boring bar with carbide inserts, - james perotti on Feb 14, 2013, 8:11 AM

The negative rake toolholders are perhaps for aluminum or other - Derrick on Feb 14, 2013, 8:39 AM

Maybe one reason. - 17bullet on Feb 14, 2013, 8:40 AM

Thanks for the replies, I see what I did wrong. The bars with the - james perotti on Feb 14, 2013, 9:39 AM

Re: Whats with these boring bars that have flats, that cause - Mike Aber on Feb 14, 2013, 12:42 PM

Thanks, that answered my questions. n/t - james perotti on Feb 14, 2013, 3:51 PM

Re: Whats with these boring bars that have flats, that cause - cody9999 on Feb 14, 2013, 2:26 PM

Thanks, you've all been a lot of help. n/t - james perotti on Feb 14, 2013, 3:53 PM

Some boring bars need anvils. - Marmot_Militia on Feb 16, 2013, 11:59 AM

Tool geometry is determined by material and process - Cal on Feb 17, 2013, 2:15 PM

Was playing with my recently mounted rotary table to lighten a R1 piston. --> Expand Thread - Ed Canoles on Feb 7, 2013, 7:14 PM

Yep, the carbide end mills are the way to go, just be - james perotti on Feb 9, 2013, 10:50 AM

Re: Was playing with my recently mounted rotary table to lighten a R1 piston. - Jon B. on Feb 9, 2013, 10:07 PM

A factory R1 piston weighs 11.9 oz and it was requested............ - Ed Canoles on Feb 10, 2013, 12:02 AM

machined Rapid receiver someone????? --> Expand Thread - michael jeune on Jan 30, 2013, 1:52 PM

EMCO MAXIMAT SUPER 11 --> Expand Thread - RIng on Jan 30, 2013, 8:28 AM

Re: EMCO MAXIMAT SUPER 11 - robny on Jan 31, 2013, 2:53 AM

I had one - Jon B. on Jan 31, 2013, 12:33 PM

I have one - Rodney Hew on Feb 4, 2013, 1:48 AM

QB78 reverse tank block --> Expand Thread - nathan on Jan 27, 2013, 2:08 PM

Hey, Nathan, have you seen my version? - Dave Dunn on Jan 28, 2013, 12:03 PM

very cool - robny on Jan 28, 2013, 5:52 PM

Collet chuck/draw bar advice...current setup has issues. --> Expand Thread - Derek on Jan 25, 2013, 9:14 PM

Just went through this... - Dave Dunn on Jan 26, 2013, 1:54 AM

Sorry about that Dave....Here's some clarity (pics) and a couple questions.... - Derek on Jan 26, 2013, 11:54 PM

OUCH!! - Dave Dunn on Jan 27, 2013, 1:19 AM

Ahh that seems much more simple... - Derek on Jan 27, 2013, 1:58 AM

Actually just found a thread on another forum with pics on the process - Derek on Jan 27, 2013, 2:25 AM

Derek, I've been through the collet chucks and drawbars, - james perotti on Jan 26, 2013, 1:05 PM

No that's wrong, one end of the tube has the female thread - james perotti on Jan 26, 2013, 4:38 PM

James do you happen to have any pics of what you're talking about... - Derek on Jan 27, 2013, 12:00 AM

Derek a draw bar has an internal thread to hold the collet, - james perotti on Jan 27, 2013, 7:33 AM

For light collet work, SKIP THE SPIGOT - Cal on Jan 29, 2013, 2:39 PM

Interesting...however what's your defination of light collet work?.... - Derek G on Jan 29, 2013, 4:15 PM

Don't worry - Airgunner4life on Jan 29, 2013, 7:24 PM

Anything that fits in a 5C is "light" - Cal on Jan 30, 2013, 12:21 PM

Will use this for a back plate to mount a chuck to my rotary table. - Ed Canoles on Feb 1, 2013, 4:44 PM

Now is the time to do it right - 17bullet on Jan 30, 2013, 3:17 PM

im so lost now , thanks for the wake up call - robny on Jan 31, 2013, 2:58 AM

Tell us how "Doing it right" accomodates reality - Cal on Jan 31, 2013, 9:57 AM

So how is doing it wrong, better? - Dave Dunn on Feb 3, 2013, 1:30 PM

Dave, your observations pass over some fine tools - Cal on Feb 4, 2013, 9:26 AM

I've tried Cal's method and...... - Derek G on Feb 4, 2013, 1:02 PM

Different strokes for different folks. - 17bullet on Feb 4, 2013, 6:57 PM

That what I like about the trade - Cal on Feb 5, 2013, 5:02 PM

Could be, Cal... - Dave Dunn on Feb 6, 2013, 12:53 PM

Striker material spec --> Expand Thread - nathan on Jan 18, 2013, 7:27 PM

Hi Nathan, Typicaly a tool steel is used and hardened afterwards, - james perotti on Jan 19, 2013, 8:43 AM

how do you guys do 11.5 tpi with no setting on the machine for such? --> Expand Thread - robny on Jan 12, 2013, 1:52 AM

You don't. You pick a size that you "can" do, or you find - james perotti on Jan 12, 2013, 7:39 AM

Something to keep in mind... - Dave Dunn on Jan 12, 2013, 12:07 PM

IF the thread is short enough, the "nearest match" can work - Cal on Jan 12, 2013, 12:38 PM

thanks guys that sums it up.nt - robny on Jan 12, 2013, 1:05 PM

Rob, It looks like 11.5 is the same as 2.2mm n/t - james perotti on Jan 16, 2013, 7:46 AM

thx - robny on Jan 17, 2013, 12:06 AM

Yup, garden hose thread... but... - Jim Gaska on Jan 22, 2013, 11:10 PM

Need split die opinions. --> Expand Thread - Ed Canoles on Jan 10, 2013, 8:10 PM

Probably won't get 4X the use from it ... - knt on Jan 10, 2013, 9:14 PM

I've sharpened some of mine with a dremel cut-off wheel with success. - John Lucas on Jan 11, 2013, 6:39 AM

Ed, Grizzly sells indiviusual dies, they work good and - james perotti on Jan 11, 2013, 8:26 AM

After checking the Grizzly web site it appears that.......... - Ed Canoles on Jan 16, 2013, 9:49 AM

The biggest difference with the "discount" version is Variability - Cal on Jan 11, 2013, 9:43 AM

Re: Need split die opinions. - 17bullet on Jan 11, 2013, 11:16 PM

Making progress... --> Expand Thread - Dave Dunn on Jan 8, 2013, 1:41 AM

Looks great so far. - Derrick on Jan 8, 2013, 8:54 AM

I knew someone would aske me that... - Dave Dunn on Jan 8, 2013, 12:08 PM

past newbie - TheDuke13 on Jan 8, 2013, 8:33 PM

Don't let that stop you... - Dave Dunn on Jan 9, 2013, 12:02 PM

Looking good, Dave. - Phil on Jan 8, 2013, 9:00 PM

Thanks, Phil... - Dave Dunn on Jan 9, 2013, 12:11 PM

one thought - robny on Jan 9, 2013, 1:29 AM

Thanks, Rob... - Dave Dunn on Jan 9, 2013, 12:15 PM

Can anyone do custom bolt lightening and charge handle lightening? --> Expand Thread - ERdept on Jan 7, 2013, 3:11 AM

Can you give a little more detail, of what you want done? n/t - james perotti on Jan 8, 2013, 10:33 AM

Cal G, got back to me via email. It's just a series of paired holes, totaling 8 to make - ERdept on Jan 8, 2013, 8:01 PM

Screw size question --> Expand Thread - Casey in SD on Jan 2, 2013, 3:22 PM

Not sure they will work? - Jeff P on Jan 2, 2013, 4:33 PM

Maybe these? - Casey in SD on Jan 2, 2013, 4:43 PM

I've seen similar to those... - Jeff P on Jan 2, 2013, 4:59 PM

The stainless ones aren't bad - Casey in SD on Jan 2, 2013, 5:02 PM

Is your stock already counterbored for cups? - John Lucas on Jan 3, 2013, 10:21 AM

Looking more closely - Casey in SD on Jan 4, 2013, 12:12 PM

Need threads on barrel muzzle.... --> Expand Thread - Phil on Dec 22, 2012, 11:26 AM

id help - robny on Dec 26, 2012, 5:11 PM

Why use such an unusual thread size? - Neil Clague on Dec 31, 2012, 1:28 AM

Not just the odd thread, but adding an adapter at a point where - james perotti on Jan 8, 2013, 5:21 PM

Reason? Airsoft 'adapters' use 14mm thread... - Phil on Jan 8, 2013, 8:49 PM

Thanks guys! Got someone on it! N.T. - Phil on Jan 8, 2013, 8:50 PM

anyone check if the harbor frieght " tapping fluid " has same content as " tap magic --> Expand Thread - robny on Dec 13, 2012, 4:00 AM

Don't know, but is TapMagic any better than.......... - Ed Canoles on Dec 13, 2012, 9:43 AM

I can't speak for Tap Magic But Tapmatic is suprior to Stoddard solvent - Cal on Dec 13, 2012, 10:24 AM

Re: I can't speak for Tap Magic But Tapmatic is suprior to Stoddard solvent - ed on Dec 14, 2012, 12:53 AM

crisco ? ur kidding ? lol.nt - robny on Dec 14, 2012, 3:38 AM

Vegetable and animal oils have much to offer in the cutting and shaping of metals - Cal on Dec 14, 2012, 9:39 AM

Re: Don't know, but is TapMagic any better than.......... - Mike Aber on Dec 14, 2012, 1:44 PM

Tap Magic is Superior - Mike Aber on Dec 14, 2012, 4:53 AM

that speaks and machines volumes - robny on Dec 14, 2012, 5:13 AM

Get this and never look back.................. - Dave on Dec 26, 2012, 2:39 PM

What....no more splatter on the wall behind my chuck?? - Ed Canoles on Dec 26, 2012, 4:41 PM

cant beat the price.nt - robny on Dec 26, 2012, 5:13 PM

I just ordered some of this stuff for a "look see". - Ed Canoles on Jan 16, 2013, 9:45 AM

Not magic... - Wbajema on Dec 29, 2012, 4:16 PM

Disaster averted! --> Expand Thread - Dave Dunn on Dec 9, 2012, 12:08 PM

Dummy question about 4 jaw chucks. --> Expand Thread - Ed Canoles on Dec 9, 2012, 9:36 AM

Hi Ed, Someone posted a good u tube vid. on how to do it, - james perotti on Dec 9, 2012, 11:05 AM

Four jaw chuck centering is simplified when you have TWO chuck keys - Cal on Dec 9, 2012, 12:57 PM

Easy - 17bullet on Dec 9, 2012, 1:23 PM

It just takes some practice and frequent use.... - Derek G on Dec 10, 2012, 8:45 PM

Thanks Y'all! At the beginning I started using........ - Ed Canoles on Dec 11, 2012, 8:58 AM

Hey, Ed, quick thought... - Dave Dunn on Dec 11, 2012, 12:38 PM

If you need that three jaw scroll chuck to hold anything securely - Cal on Dec 11, 2012, 5:28 PM

I mark the work also, but always re-indicate even in a collet. n/t - james perotti on Dec 12, 2012, 8:13 AM

James , If out in a collet, what do you do? - Cal on Dec 12, 2012, 9:58 AM

Hi Cal. If a piece is showing runout in the collet, I try - james perotti on Dec 12, 2012, 12:08 PM

"give it tap with a small plastic hammer."..........Hummm........ - Ed Canoles on Dec 12, 2012, 6:49 PM

"Bumping in" is standard procedure for both scroll and independent chucking - Cal on Dec 12, 2012, 6:58 PM

I had no idea that "bumping, rapping, hammering" was part........ - Ed Canoles on Dec 13, 2012, 9:40 AM

Ed, Some times, you just do what it takes. - Cal on Dec 13, 2012, 10:11 AM

On a chuck, I will tap the outside of the nearst jaw, if that - james perotti on Dec 13, 2012, 3:48 PM

Ed You know the problem with six jaw chucks? - Cal on Dec 13, 2012, 9:46 PM

I count myself fortunate - Cal on Dec 12, 2012, 6:52 PM

Well.....just set up my LatheMaster bench top lathe with the 4 jaw chuck and....... - Ed Canoles on Dec 19, 2012, 3:10 PM

just tighten the high jaw that little bit, the opposite will give - Cal on Dec 19, 2012, 3:29 PM

Just for grinns I mounted the original 4" 3 jaw scroll chuck........ - Ed Canoles on Dec 25, 2012, 10:33 PM

I would check runout as a function of work Diameter first - Cal on Dec 25, 2012, 11:49 PM

"influenced by ham fisted tightening or wrecks!".........so you're saying that........ - Ed Canoles on Dec 26, 2012, 4:43 PM

4 jaws - Wbajema on Dec 29, 2012, 3:57 PM

need barrel machined to fit a crosman steel breech --> Expand Thread - ED on Dec 5, 2012, 3:07 PM

What caliber, length? - Jim Gaska on Dec 5, 2012, 7:34 PM

jim - robny on Dec 8, 2012, 2:58 AM

Thanks, Rob. I'm in contact with several people - Jim Gaska on Dec 8, 2012, 1:00 PM

lmao it will look cool! nt - robny on Dec 9, 2012, 10:46 AM

>20 cal - Jon on Mar 10, 2013, 8:34 AM

education --> Expand Thread - calli kid on Nov 28, 2012, 7:24 PM

If you're in SoCal...... - John Lucas on Nov 29, 2012, 12:20 AM

Re: education - Mike Aber on Nov 29, 2012, 3:05 AM

thank you both for your great recommendations - calli kid on Nov 30, 2012, 3:58 AM

Blowing out an older 6" Buck chuck --> Expand Thread - Chip Smith on Nov 27, 2012, 2:04 PM

email sent n/t - cody9999 on Nov 29, 2012, 12:42 AM

Clint is the new owner. thanks, nt - Chip Smith on Nov 29, 2012, 1:28 PM

I sure miss my machines... can't wait until February... --> Expand Thread - Mike Aber on Nov 25, 2012, 9:46 PM

Really nice!!!!!!! - 17bullet on Nov 26, 2012, 8:19 AM

Looks great - Mike on Nov 27, 2012, 7:08 AM

No back gear - Mike Aber on Nov 29, 2012, 2:47 AM

Glad you were able to stay within you budget. - Lon on Nov 28, 2012, 1:16 PM

great plan - Rex B on Dec 18, 2012, 12:49 PM

delete --> Expand Thread - Derek on Nov 15, 2012, 10:32 PM

Anyone need a collet set. --> Expand Thread - Mark on Nov 11, 2012, 9:29 AM

looks like a mill to me --> Expand Thread - robny on Nov 9, 2012, 8:40 PM

Whoa! That's a Branson Ultra Sonic Drill - Cal on Nov 11, 2012, 12:03 AM

Re: Whoa! That's a Branson Ultra Sonic Drill - robny on Nov 11, 2012, 7:14 PM

another whats it worth dont blast me or --> Expand Thread - robny on Nov 2, 2012, 7:46 PM

I wouldn't hesitate on that one. - cody9999 on Nov 2, 2012, 10:53 PM

Needs a little TLC.... - Derek G on Nov 3, 2012, 2:14 PM

good price, - DaveInME on Nov 3, 2012, 6:00 PM

thanks guys - robny on Nov 4, 2012, 5:56 PM

Looking for another 12"-18" dial height gage. --> Expand Thread - John Lucas on Oct 30, 2012, 8:22 PM

Found it. Thank you Bryan. - John Lucas on Oct 31, 2012, 1:54 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Next >>