<< Previous Topic | Next Topic >>Return to Index  

Boring the Breach end?

June 30 2009 at 4:28 PM		   (Login ora8i)
YFOT
from IP address 87.112.16.29
Boring the Breach end?

I've just bumped this on the Chinese airgun forum then I realised it would be better here.

Im thinking of using a good barrel in a 79 and removing the step/tray would be easier but I have a few questions.

Should the rifling start before or just after the T/Port?

Is the breach end drilled out to the transfer port?

Or is it honed or what??

An write-up's/how to's on the net?


Regards Ora

Rivington Riflemen's Website http://www.rivington-riflemen.org
My Website http://www.ora8i.rivington-riflemen.org


    
This message has been edited by ora8i from IP address 87.112.16.29 on Jun 30, 2009 4:29 PM


 
 Respond to this message   
AuthorReply

(Login lhd)
YF
99.196.138.102

I prefer rifling to commence after the transfer port

July 2 2009, 10:08 PM 

Or, better yet, to have the air blow thru from the bolt END or BREECHFACE,

 
 Respond to this message   
Current Topic - Boring the Breach end?
  << Previous Topic | Next Topic >>Return to Index