Not sure if everyone is aware of these or not. I just ordered one for less than $47.00 shippped. Good reviews for these things. Hope I'm not breaking a rule but here is the link:

http://www.airgundepot.com/rosman-airguns-1377c-american-classic-air-pistol-remanufactured.html

They are good as new; I took one and upgraded it to this .25 cal 1325:

Nice Looking Shooter. I was actually told once, that the Refurbished ones are gone over even Better than the Original ones from the Factory.

Grant.

I actually only see one thing wrong with it. NO STACE PARTS!

You gotta get some Grant goodies for that bad boy!


http://crosmanairgunmods.blogspot.com/

Yes, you are right! I need a nice brass "Stace" trigger and it will be done for good.

Thanks,

Kevin

I bought a Metre of Brass months ago for some Brass Roller Triggers, but I did the Alloys First cause that was the Popular Choice from the Batch before, when I did Brass & only a Few Alloy without the Roller. I cant give a Date at this Stage cause I have other Parts to do as well to Stock up a Bit in the Cupboard.

Grant.

i've measured one of your rollers and it's approx. 8mm across the trigger. 1000mm in a meter. so that means you could get roughly 125 beautiful, lovely, sweet, brass rollers out of that stock.

is that right?

if i'm right, then when they're ready they should be in stock for about a day and half, maybe two. just trying to figure out my strategy.

}%^)=)

BUT You have to Deduct some Material for Cutting off the Bar and Facing each Disc. I should get about 95.

Grant.

Good to hear they're still on your list of things to do. Seems like you've a pretty big list. I'll be lurking. Your parts are the best!!!

Thanks,

Kevin

Check the valve when you get it. I just received two of them from AGD and one was a Canadian model with a relief hole drilled in the intake end of the valve.

Mine was pretty gunked up and I had to soak it for a while to get it cleaned. But all is well now...

"R" stamped? I suppose they would be if refurbed at the factory.

Thanks Brian.

I guess I better get one. Gotta have a place for that roller trigger! LOL! All I have right now is phase 1. Their shipping is high but U can use a coupon code to help somewhat.

Brian.

 

Only one "R" stamp on this refirb. Otherwise looks 100% new. Came in nice sealed box from Crosman!

[IMG][/IMG]

It's easily removed or Covered! (whoever dies with the most pens wins! LOL)

[IMG][/IMG]

 

 

 

 

Ya aint got a Red one yet!! Ive got lots of Green ones here, but I might get stuck with them,

Grant.

green one but, after a red one PLEASE.
the only problem is you don't have anything to buy w/ the cupboards so BARE.
so while i wait here patiently (not really, just saying that), i'll plan and scheme on what i'm going to get and what stace part to buy . %^)=)

MY WISH LIST ( just for starters)...... brass roller, winged cap, power adjuster (brass? alloy?) ETC., ETC., ETC.

%*)=)

Xmas is comin! Us guys pretty much have to get our own gifts anyhoo! What's better than Stace parts w/ Pens!!!

LOL

I have no problem with a Green STACE pen; I think I'll ask for one when I order my STACE Repeater Breech, Bolt and Barrel

shootski

The Canadian valve also! A 4/40 setscrew and locktite plugged that little orifice! Been a long time since I plugged one!! LOL!