Return to Index  

Adversary!

July 2 2009 at 6:15 AM

Massimo LaCivita  (Login nemicissim0)
HyperScale Forums
from IP address 82.104.211.172

Here is what happened in the latest days.

I scratched a vague cockpit.

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

I then assembled the whole thing: As you can see, I just replaced the cabane struts with thinner stretched sprue, and the underwing gun pods with those of a BF109, heavily sanded to shape. I would have pulled a new canopy, but I preferred to use the kit one, that allowed me to superglue it down and sand it perfectly blended with the fuselage.

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

The thing after a good coat of primer (some of the flaws that popped out were later fixed)

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

The cowling was the worst part of a bad kit, being totally uncorrect in shape (cylinder instead of barrel). I just replaced the bulges and engraved the exhaust places. I would not bother scratching a new engine: this is not worth the effort with such a hopeless kit. Before and after.

[IMG][linked image][/IMG]

[IMG][linked image][/IMG]

Plane Talking guys sentenced that this was most likely painted in stadard Temperate Sea Scheme, and that will be. However, they raised an issue about which propeller, two or three bladed...I'll chose a three blades, just because I like it best and it better hides the so-called engine...Accuracy...oh well...



 
 Respond to this message   
Responses


HyperScale's Group Build Guidelines

The objective of this Group Build is to encourage as many modellers as possible to build their kits and share their progress via words and photos on this Forum.

You are welcome to post general construction tips or relevant reference information and photos to this Forum too.

This Group Build will feature Airfix kits.

  1. Build as many kits as you like

  2. Conversions, aftermarket and scratchbuilding are all permitted.

  3. Any markings are acceptable.

  4. Document your progress and do a write-up on your build - where did you have trouble, what improvements did you make, what markings did you choose and why? It would be GREAT if everyone would do a writeup and submit it to HyperScale as a Feature Article.
     

Posting or replying to messages on The Group Build Forum requires visitors to register. If you have not already registered on one of HyperScale's other Forums, you will need to:

  1. First register with Network 54, the Forum provider.Click here to register with Network 54.

  2. Then, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.