Return to Index

WAGB - Refuelling Set ,AEC Tanker...

July 3 2009 at 7:55 PM

Woz (Login GranpaWoz)
HyperScale Forums
from IP address 86.128.7.149

After reading Chris's post regarding the QL,there is very little I can add.Although I didn't realise the moldings were so old.
Anyway preamble over on to the pics

[IMG] [linked image]

[/IMG]

The instructions,in classic Airfix fashion
[IMG] [linked image]

[/IMG]

And the Sprue
[IMG] [linked image]

[/IMG]

[IMG] [linked image]

[/IMG]

and the decal sheet
[IMG] [linked image]

[/IMG]

As you can see the components a surprisingly free of flash (for a molding that has been in use continuously) and has a fair degree of detail.I'm beginning to look forward to starting this build,but need to do some more trawling on google first.....

So there you have it.

Take care and happy 4th to all the Yanks reading this
Woz

This message has been edited by GranpaWoz from IP address 86.128.7.149 on Jul 3, 2009 7:55 PM

Respond to this message

Responses

Hi Woz. - Victor Scheuerman on Jul 3, 2009, 8:03 PM

Thanks Vic..... - Woz on Jul 3, 2009, 8:11 PM

That looks very good Vic - William De Coster on Jul 4, 2009, 4:52 PM

Try 'aec model O854' when 'Googling', as technically the 6x6 wasn't a Matador, though... - Steve Naylor on Jul 4, 2009, 2:01 PM

OK, I learned something again - William De Coster on Jul 4, 2009, 4:53 PM

Well I never,... - Woz on Jul 5, 2009, 7:59 AM

One feature of the 'Matadors' (4x4 and 6x6), is that the mudguards were really only... - Steve Naylor on Jul 5, 2009, 9:49 AM

HyperScale's Group Build Guidelines

The objective of this Group Build is to encourage as many modellers as possible to build their kits and share their progress via words and photos on this Forum.

You are welcome to post general construction tips or relevant reference information and photos to this Forum too.

This Group Build will feature Airfix kits.

Build as many kits as you like

Conversions, aftermarket and scratchbuilding are all permitted.

Any markings are acceptable.

Document your progress and do a write-up on your build - where did you have trouble, what improvements did you make, what markings did you choose and why? It would be GREAT if everyone would do a writeup and submit it to HyperScale as a Feature Article.

Posting or replying to messages on The Group Build Forum requires visitors to register. If you have not already registered on one of HyperScale's other Forums, you will need to:

First register with Network 54, the Forum provider.Click here to register with Network 54.

Then, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.