Return to Index  

Thanks Pete I did rush a bit on a couple of...

January 24 2012 at 2:30 AM

Simon Wolff  (Login Slywolff)
HyperScale Forums
from IP address

Response to My Swordfish is at a similar stage of completion.

parts - mainly with the lower fuselage piece and glued it out of alignment! My mistake. But the clear part fit is not good and I did take quite a lot of care and did quite a bit of filing and sanding for the tailplane part but there was still a substantial gap... plus there were a couple of sink marks on the part that fits behind the mg.. Anyway I will post some photos further on.. Nothing serious it is still a fabulous kit and I am enjoying building it and might even build another one!


 Respond to this message   

HyperScale's Group Build Guidelines

The objective of this Group Build is to encourage as many modellers as possible to build their kits and share their progress via words and photos on this Forum.

You are welcome to post general construction tips or relevant reference information and photos to this Forum too.

This Group Build will feature Airfix, Frog and Matchbox kits.

  1. Build as many kits as you like

  2. Conversions, aftermarket and scratchbuilding are all permitted.

  3. Any markings are acceptable.

  4. Document your progress and do a write-up on your build - where did you have trouble, what improvements did you make, what markings did you choose and why? It would be GREAT if everyone would do a writeup and submit it to HyperScale as a Feature Article.

Posting or replying to messages on The Group Build Forum requires visitors to register. If you have not already registered on one of HyperScale's other Forums, you will need to:

  1. First register with Network 54, the Forum provider.Click here to register with Network 54.

  2. Then, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.


free counters