discovery

Benjamin Discovery Forum Click on the gun picture above to get the diagram and parts list - courtesy of Marvin Yellow forum BOI Off Topics Chinese GAMO Archives Classifieds Events FieldTarget AMW To become a Poster (click) If the posts you make do not appear, email Steve at eagleaetos@yahoo.com, include your login id
Visitors in this forum in the last 10 minutes: 2 Visitors AK_Warren, 1 guest

Not logged in | Login | Create Account

Search Chat! Post

Will not cock Expand Thread - bob salzman on Oct 12, 2008, 7:15 PM

TESTS - robert on Oct 12, 2008, 8:14 PM

I'm on quest for the right hammer spring Expand Thread - Bob from Kaliforniastan on Oct 12, 2008, 4:44 PM

the 392 spring is much longer than the disco spring ,and heavier wire - scot laughlin on Oct 12, 2008, 6:54 PM

Re: I'm on quest for the right hammer spring - D R on Oct 13, 2008, 1:02 AM

Disco. Centerpoint Expand Thread - C on Oct 11, 2008, 8:59 PM

No but... - Doug W on Oct 11, 2008, 11:30 PM

Re: No but... - C on Oct 12, 2008, 12:45 AM

Aftermarket Stock? Expand Thread - Ron on Oct 11, 2008, 7:37 PM

Woods and Water are the only ones that make aftermarket stocks that I know of - Mike in NC on Oct 11, 2008, 9:17 PM

Re: Woods and Water are the only ones that make aftermarket stocks that I know of - ron on Oct 11, 2008, 11:32 PM

you could rework a factory stock...but woodsnwaters is much nicer ....pic - scot laughlin on Oct 12, 2008, 1:59 AM

Re: you could rework a factory stock...but woodsnwaters is much nicer ....pic - george benson on Oct 12, 2008, 11:31 PM

Thanks for the compliment..yes,I reworked my original stock. - scot laughlin on Oct 12, 2008, 11:56 PM

Re: Thanks for the compliment..yes,I reworked my original stock. - Ron on Oct 13, 2008, 12:49 AM

Made me a poor mans drill press bolt handle... Expand Thread - Jeff P on Oct 11, 2008, 4:56 PM

Re: Made me a poor mans drill press bolt handle... - C on Oct 11, 2008, 8:54 PM

OK.. those teaser pics got me - Adam on Oct 12, 2008, 12:11 AM

double post - delete - Jeff P on Oct 12, 2008, 11:00 AM

Sure... - Jeff P on Oct 12, 2008, 11:02 AM

thanks for sharing! - Adam on Oct 12, 2008, 2:42 PM

Its a carving attachment... - Jeff P on Oct 12, 2008, 5:22 PM

Retaining collar not staying in valve body Expand Thread - Sam B on Oct 11, 2008, 5:12 AM

search the Crosman Forum randy tore down a - Tom on Oct 11, 2008, 2:33 PM

Has anyone tried moving the factory front Disco sight back? Expand Thread - Diamondback on Oct 10, 2008, 6:53 PM

Wow...Guess Not. Glad I Thunk It. - Diamondback on Oct 12, 2008, 9:22 PM

Anyone know where to get 12FSS foster connection? Expand Thread - John from CA on Oct 9, 2008, 5:50 PM

Try your local or online paintball shop - JD in Atlanta on Oct 9, 2008, 8:22 PM

What thread pitch is the bolt handle? Expand Thread - Jeff P on Oct 9, 2008, 11:48 AM

Re: What thread pitch is the bolt handle? - george benson on Oct 10, 2008, 6:25 PM

Thank you...nt - Jeff P on Oct 10, 2008, 11:35 PM

Another sloppy barrel?? Expand Thread - Doug W on Oct 9, 2008, 9:46 AM

Re: Another sloppy barrel?? - C on Oct 9, 2008, 10:13 AM

Could send it back... - Rich Woods on Oct 9, 2008, 11:24 AM

This is not completely related to the barrel. - Henry in NJ on Oct 9, 2008, 3:56 PM

So long as it shoots some good pellets well... - robert on Oct 9, 2008, 8:30 PM

Why tuners exist... - Rich Woods on Oct 9, 2008, 11:57 PM

New one's on the way... - Doug W on Oct 11, 2008, 3:45 PM

Not sure about QA issues... - Rich Woods on Oct 11, 2008, 10:32 PM

Re: Not sure about QA issues... - Doug W on Oct 11, 2008, 11:20 PM

Two groups... - robert on Oct 12, 2008, 12:22 AM

Securing fill adapter & valve Expand Thread - D Barr on Oct 9, 2008, 2:04 AM

Why?? - Anthony on Oct 9, 2008, 7:53 AM

Re: Securing fill adapter & valve - D R on Oct 9, 2008, 7:53 AM

Thank you - D Barr on Oct 9, 2008, 11:58 AM

the o-rings add enough friction to prevent unscrewing - scot laughlin on Oct 10, 2008, 12:09 PM

Scope Rings For Discovery Expand Thread - Ron on Oct 7, 2008, 10:45 PM

High mounts... - Rich Woods on Oct 7, 2008, 11:18 PM

Re: High mounts... - Ron on Oct 8, 2008, 6:22 AM

CenterPoint high mount.rings.. - Rich Woods on Oct 8, 2008, 7:23 AM

Re: CenterPoint high mount.rings.. - Ron on Oct 8, 2008, 10:26 AM

the cheek piece is too low for high mounts...try - scot laughlin on Oct 10, 2008, 12:15 PM

UPS just delivered my new D with pump in .22cal Expand Thread - brad on Oct 7, 2008, 6:28 PM

I just noticed the guage is different size - brad on Oct 7, 2008, 8:01 PM

Re: I just noticed the guage is different size - C on Oct 7, 2008, 8:40 PM

How about a picture...??? N/T - Rich Woods on Oct 7, 2008, 11:16 PM

Yes in few minutes, how about scope mounts? PICTURE! - b on Oct 8, 2008, 12:16 AM

Same gauge... - Rich Woods on Oct 8, 2008, 7:33 AM

Scope mounts are those high,1 inch,accushot? - b on Oct 8, 2008, 5:53 PM

CenterPoint High Mounts.... - Rich Woods on Oct 8, 2008, 6:21 PM

Look how gauge is set in alot more? - b on Oct 9, 2008, 3:27 PM

Hang a plumb bob... - Rich Woods on Oct 10, 2008, 8:54 AM

Re: Hang a plumb bob... - Ron on Oct 11, 2008, 11:38 PM

A few people asked to see my hunting Discovery...caution: (lots of photos) Expand Thread - Mike T. on Oct 7, 2008, 5:22 PM

Re: A few people asked to see my hunting Discovery...caution: (lots of photos) - C on Oct 7, 2008, 5:38 PM

short bolt - Doug W on Oct 7, 2008, 10:07 PM

Nice rig Mike...... - glyconny on Oct 7, 2008, 6:58 PM

Questions - Tom on Oct 7, 2008, 7:53 PM

Forend... - Mike T. on Oct 7, 2008, 9:45 PM

Thanx I will watch for that picture...no hurry as I have other projects - Tom on Oct 7, 2008, 9:48 PM

Yes...the gripframe uses the standard screws... - Mike T. on Oct 8, 2008, 1:43 PM

Very nice... - John on Oct 8, 2008, 10:11 AM

QS for Mike T What is the trigger pull on your custom work of Art.? - Joe in WV on Oct 10, 2008, 11:43 PM

It's around 10 oz. ...creep free, predictable - MIke T. on Oct 11, 2008, 11:05 PM

Info on where and what to buy Expand Thread - WashingtonEd on Oct 7, 2008, 3:03 PM

pyramydair will test your rifle for $10 but if ypu want top - Garry on Oct 7, 2008, 8:21 PM

So if ya don't pay for the $10 check ya get ones they checked and rejected for others? nt - Tom on Oct 8, 2008, 4:50 PM

MAC 1 Discovery .22 vs Squirrel..graphic.. Expand Thread - Rich Woods on Oct 7, 2008, 1:30 PM

Re: MAC 1 Discovery .22 vs Squirrel..graphic.. - C on Oct 7, 2008, 4:57 PM

ldc internals? Expand Thread - Bob from Kaliforniastan on Oct 6, 2008, 9:51 PM

Barrel Bands came in Expand Thread - Doug W on Oct 6, 2008, 12:53 PM

Bands are definately different - Carie, Marty on Oct 6, 2008, 4:39 PM

If you have any extras, I'll take one. - John from CA on Oct 6, 2008, 5:28 PM

Did ya by chance order the part number for the 2240 style - Tom on Oct 7, 2008, 7:49 PM

Re: Did ya by chance order the part number for the 2240 style - Doug W on Oct 7, 2008, 10:01 PM

Bands - Tom on Oct 7, 2008, 10:55 PM

Re: Bands - Doug W on Oct 8, 2008, 10:26 AM

I would still call ....thats sad they are cost cuttin it - Tom on Oct 8, 2008, 12:50 PM

Same goes for the end plugs... - Jeff P on Oct 8, 2008, 4:17 PM

My first Disco has an aluminum fitting wher the foster screws in my second one has a blued - Tom on Oct 8, 2008, 4:38 PM

No, sorry its the tube plug - Jeff P on Oct 8, 2008, 4:57 PM

Jeff ....thanx - Tom on Oct 8, 2008, 5:00 PM

That is too bad! - D Barr on Oct 9, 2008, 1:38 AM

I'll take one - Diamondback on Oct 10, 2008, 7:07 PM

Discovery Prototypes faired well at the 10/5 Haverhill FT Match... Expand Thread - AteamRAY on Oct 6, 2008, 7:25 AM

Would it? Expand Thread - ashunter on Oct 5, 2008, 10:35 PM

tough without tools,but a softer striker spring would get you in the ballpark - scot laughlin on Oct 6, 2008, 11:16 AM

Would RWS 34 in .22cal compare Discovery .22cal? Expand Thread - b on Oct 5, 2008, 4:32 PM

Re: Would RWS 34 in .22cal compare Discovery .22cal? - C on Oct 5, 2008, 6:24 PM

Great info - b on Oct 5, 2008, 6:43 PM

350 or Disco - george benson on Oct 5, 2008, 6:50 PM

I really like my .22 Disco................... Expand Thread - Joe the Builder on Oct 4, 2008, 7:45 PM

Re: I really like my .22 Disco................... - C on Oct 5, 2008, 3:11 AM

How's - TroyinBC on Oct 5, 2008, 11:52 AM

.22 Cal.Custom Disco Pics - bbgunbob on Oct 6, 2008, 11:15 AM

Re: .22 Cal.Custom Disco Pics - C on Oct 6, 2008, 10:26 PM

I like my Discovery alot too!!! - Carie, Marty on Oct 5, 2008, 9:36 PM

Thanks for the pictures bbgunbob - TroyinBC on Oct 6, 2008, 10:06 PM

Disco Barrels and Accuracy Expand Thread - Henry in NJ on Oct 2, 2008, 10:38 AM

interesting idea! - WeeDoggies on Oct 2, 2008, 12:09 PM

Maybe.... - Rich Woods on Oct 2, 2008, 2:40 PM

choke the loose barrel....chuck it in the lathe,cut a shoulder - scot laughlin on Oct 3, 2008, 1:37 PM

How much did you pay ? Curious Expand Thread - b on Oct 1, 2008, 1:47 AM

Crap shoot - Mike on Oct 1, 2008, 12:18 PM

I also bought mine from Tim at MAC-1 and it is - Joe in WV on Oct 1, 2008, 4:49 PM

I can appreciate keeping those fellas in buisness but - b on Oct 1, 2008, 10:44 PM

Call MAC 1 for quote... - Rich Woods on Oct 1, 2008, 11:43 PM

Bottom Line Analysis, get the MAC1 Quote then Add Up the PA Cost, return shipping, and - Tony on Oct 3, 2008, 9:46 PM

Another satified MAC1 Discovery owner here! nt - Tony on Oct 3, 2008, 9:41 PM

I second that, MAC1 - Cruisers on Oct 4, 2008, 1:31 AM

Got my new Discovery today... and need advice. Expand Thread - Roald on Sep 30, 2008, 9:28 PM

Re: Got my new Discovery today... and need advice. - C on Sep 30, 2008, 10:55 PM

Have to admit, that one's finish is extra.... - robert on Sep 30, 2008, 11:14 PM

I bought mine from MAC 1... - Rich Woods on Sep 30, 2008, 11:27 PM

got mine from pyramid airgun and was flawless I would - Garry on Oct 1, 2008, 12:11 AM

Re: Got my new Discovery today... and need advice. - D R on Oct 1, 2008, 1:08 AM

Call Crosman and ask if they can get you a new one before the 11th - David Enoch on Oct 1, 2008, 9:12 AM

Thanks for all the input guys. - Roald on Oct 1, 2008, 1:54 PM

Unacceptable - Mike on Oct 1, 2008, 12:15 PM

Roald send it back and get one from Tim at MAC-1 - Joe in WV on Oct 1, 2008, 4:57 PM

Bad finish and a bit slow - James from Ok on Oct 1, 2008, 9:20 PM

A bit low? - John from CA on Oct 1, 2008, 11:58 PM

Tests I've seen on a stock Disco .22..... - Rich Woods on Oct 2, 2008, 2:26 AM

Sounds about right - robert on Oct 3, 2008, 9:20 PM

extrernal hammer al la 101 or 102 Expand Thread - Bob from Kaliforniastan on Sep 30, 2008, 1:14 PM

I put a rear cocking knob on a 2260(from a SSP250) - scot laughlin on Oct 1, 2008, 11:46 AM

Disco External Barrel Dimensions Expand Thread - Henry in NJ on Sep 29, 2008, 2:06 PM

Nevermind.. 7/16! - Henry in NJ on Sep 29, 2008, 2:09 PM

Any way to make these long bomb shooters? Expand Thread - b on Sep 29, 2008, 12:21 PM

Re: Any way to make these long bomb shooters? - C on Sep 30, 2008, 11:01 PM

psi question Expand Thread - Mark on Sep 29, 2008, 1:38 AM

Should hold pressure indefinately - Henry in NJ on Sep 29, 2008, 11:25 AM

Re: psi question - jeff124 on Sep 29, 2008, 4:34 PM

psi ? - Mark on Sep 29, 2008, 7:30 PM

Even money bet.... - robert on Sep 29, 2008, 7:47 PM

paging DougW Expand Thread - Sam in centex on Sep 28, 2008, 10:57 PM

Re: paging DougW - Doug W on Sep 29, 2008, 10:09 AM

22 disco low on power? Expand Thread - Adam on Sep 27, 2008, 10:26 PM

Chronograph? - robert on Sep 27, 2008, 10:40 PM

sorry, no chrony yet - Adam on Sep 27, 2008, 10:46 PM

Have had them act like that... - robert on Sep 27, 2008, 11:12 PM

Crows are tough....and protected.... - Doug Owen on Sep 28, 2008, 11:11 AM

Check state law. - robert on Sep 28, 2008, 12:05 PM

Yes, do check the law.... - Doug Owen on Sep 28, 2008, 6:33 PM

Louisiana law... - robert on Sep 28, 2008, 9:05 PM

It stil doesn't matter.... - Doug Owen on Sep 30, 2008, 2:23 PM

Re: 22 disco low on power? - C on Sep 28, 2008, 12:34 PM

A little help if you please..............................! Expand Thread - D R on Sep 27, 2008, 6:14 PM

Have you tried emailing Mac-1 or some other seller? - Mike in NC on Sep 27, 2008, 6:42 PM

Try Here - Anthony on Sep 27, 2008, 9:19 PM

Fill Nipple Adapter............................! - D R on Sep 27, 2008, 10:42 PM

nipple - Sunny on Sep 29, 2008, 11:59 PM

Has anyone converted to .25? Expand Thread - John from CA on Sep 27, 2008, 1:26 PM

.25 - Paul on Oct 3, 2008, 11:14 PM

Discovery shoot day. Too much fun. Expand Thread - Mike in NC on Sep 27, 2008, 12:19 PM

Re: Discovery shoot day. Too much fun. - C on Sep 27, 2008, 5:45 PM

It's a Mac-1 gun. Tim does his thing to it and puts a power adjuster on it. - Mike in NC on Sep 27, 2008, 6:40 PM

Re: It's a Mac-1 gun. Tim does his thing to it and puts a power adjuster on it. - C on Sep 27, 2008, 8:16 PM

Do you have a shot string with the HDD in? - M'hackett on Oct 6, 2008, 10:36 PM

Hey guys, what about the noise? Expand Thread - Cruisers on Sep 26, 2008, 11:19 PM

NC Mike certainly noticed a change. - Steve in NC on Sep 27, 2008, 12:41 AM

I did notice a big change. - Mike in NC on Sep 27, 2008, 9:09 AM

Mike, did you install - Cruisers on Sep 27, 2008, 4:05 PM

No. I might be able to dial the noise up with the power, but I haven't tried. - Mike in NC on Sep 27, 2008, 4:26 PM

Does he ship to Canada? - Alan on Sep 28, 2008, 2:25 PM

Finally(groundhog) Expand Thread - C on Sep 25, 2008, 10:58 AM

Were you using a 177 or a 22? - Joe in WV on Sep 25, 2008, 5:13 PM

Re: Were you using a 177 or a 22? - C on Sep 25, 2008, 6:43 PM

chucks - Art W. on Sep 25, 2008, 8:05 PM

Re: chucks - C on Sep 25, 2008, 9:56 PM

Pressure release needed? Expand Thread - Cruisers on Sep 24, 2008, 11:12 PM

It's a very good idea safety-wise, and I personally strongly recommend it... - Steve in NC on Sep 24, 2008, 11:16 PM

I understand weird things can happen, - Cruisers on Sep 25, 2008, 3:45 PM

No. nt - Steve in NC on Sep 25, 2008, 4:42 PM

Weird things always happen. Just shoot the air out of the gun then do the install. - Mike in NC on Sep 26, 2008, 7:38 AM

Barrel band removal Expand Thread - C on Sep 24, 2008, 5:59 PM

5/64 - John from CA on Sep 24, 2008, 10:45 PM

Re: 5/64 - C on Sep 25, 2008, 3:45 AM

2 barrel bands Expand Thread - glyconny on Sep 24, 2008, 9:39 AM

Not here - Greg in NC on Sep 24, 2008, 10:35 AM

Greg, I've done the ........ - glyconny on Sep 24, 2008, 1:20 PM

Re: 2 barrel bands - Doug W on Sep 24, 2008, 1:53 PM

I'm totally on board with the general theory with this - Greg in NC on Sep 24, 2008, 11:24 PM

I'm a little confused as to where exactly ......... - glyconny on Sep 25, 2008, 9:23 AM

Re: I'm totally on board with the general theory with this - Doug W on Sep 25, 2008, 11:15 PM

If you remove the factory brake... - robert on Sep 24, 2008, 3:48 PM

Two Dumb Questions... Expand Thread - Jim Raymond on Sep 23, 2008, 9:04 PM

Goo Gone seem to work for me and if it is like the majority - Joe in WV on Sep 23, 2008, 9:54 PM

300 pellets shot... - Rich Woods on Sep 24, 2008, 12:39 AM

Good shootin' , Rich, and an update... - Jim Raymond on Sep 24, 2008, 9:14 PM

Your welcome... - Rich Woods on Sep 25, 2008, 8:25 AM

Pistol grip conversion question Expand Thread - John on Sep 23, 2008, 8:59 AM

Yes.. - mike t on Sep 23, 2008, 9:38 AM

Thanks, next question.... - john on Sep 23, 2008, 11:24 AM

On my Discos the tube only has the new breech screw location - Larry on Sep 23, 2008, 5:24 PM

I added a few picts to my server of the pistol grip Disc... ... but... - Mike T. on Sep 25, 2008, 10:35 PM

any thoughts in making a disco into a carbine Expand Thread - buster on Sep 22, 2008, 10:40 PM

Someone on the Crosman forum chopped a Disco tube to pistol size. - John from CA on Sep 22, 2008, 11:24 PM

Found it, it is a pistol Disco. - John from CA on Sep 25, 2008, 2:06 AM

2250 disco. - Bob from Kaliforniastan on Sep 23, 2008, 12:36 AM

I'll be doing just that - Anthony on Sep 23, 2008, 7:40 AM

Discovery and two dead squirrels Expand Thread - JD in Atlanta on Sep 22, 2008, 3:21 PM

Your making me want to go out and shoot squirrels. To me it sounds like - Mike in NC on Sep 22, 2008, 3:23 PM

Re: Discovery and two dead squirrels - C on Sep 22, 2008, 4:53 PM

Need a bolt probe o-ring Expand Thread - LEE IN VA. on Sep 22, 2008, 12:15 PM

I pulled this post from page three cause it got lost in the approval process. Cool stock. Expand Thread - Mike in NC on Sep 21, 2008, 6:10 PM

Disco update... Expand Thread - Rich Woods on Sep 21, 2008, 12:59 PM

Nice - robert on Sep 21, 2008, 1:58 PM

Crosman front barrel brake... - Rich Woods on Sep 21, 2008, 2:59 PM

Can do it... - robert on Sep 21, 2008, 6:25 PM

A thought on a Discovery Pressure Regulator Expand Thread - Scott Turnquist on Sep 20, 2008, 3:08 PM

My thoughts.........................................! - D R on Sep 20, 2008, 11:01 PM

Very nice. I was wondering how does a longer barrel affect things in the air gun world? - Mike in NC on Sep 21, 2008, 9:33 AM

Re: Very nice. I was wondering how does a longer barrel affect things in the air gun world? - D R on Sep 22, 2008, 4:04 PM

I just didn't think length mattered on airguns, but maybe it's just springers it - Mike in NC on Sep 22, 2008, 6:27 PM

Re: I just didn't think length mattered on airguns, but maybe it's just springers it - D R on Sep 22, 2008, 8:39 PM

You built a Frankenairgun it sounds like. - Mike in NC on Sep 22, 2008, 9:15 PM

Suggestion... - Doug Owen on Sep 21, 2008, 10:53 AM

Re: Suggestion... - D R on Sep 22, 2008, 4:09 PM

Got any close up photos? nt - Mike in NC on Sep 23, 2008, 4:08 PM

D.R. I'm still amazed by this gun and the regulator. - Mike in NC on Sep 24, 2008, 11:37 AM

The thing about a regulator is that it adds several moving parts and seals... - Steve in NC on Sep 21, 2008, 9:50 AM

That can or can't be achieved in a simpler way? - Mike in NC on Sep 21, 2008, 9:53 AM

Almost everything a regulator can do can also be done by... - Steve in NC on Sep 21, 2008, 10:35 AM

So the larger the volume of air the more stable it is, but larger reservoirs could - Mike in NC on Sep 21, 2008, 10:50 AM

Good thought. nt - Steve in NC on Sep 21, 2008, 10:53 AM

Re: Almost everything a regulator can do can also be done by... - D R on Sep 22, 2008, 3:40 PM

Actually, DR, the purpose of PCP regulators is to hold pressure constant... - Steve in NC on Sep 22, 2008, 8:36 PM

Well, there ya go Steve.........................! - D R on Sep 23, 2008, 1:57 AM

If its only purpose is to reduce pressure, then it's much more complicated... - Steve in NC on Sep 23, 2008, 10:10 AM

Actually it only adds one additional moving part..... - Pete from Tn on Sep 21, 2008, 10:42 AM

One? Perhaps you could count again. For example, in the drawing above... - Steve in NC on Sep 21, 2008, 10:51 AM

I cannot comment on his design but.... - Pete from Tn on Sep 21, 2008, 11:28 AM

Just a few comments, Pete. - Steve in NC on Sep 21, 2008, 12:06 PM

Steve, a few more comments.... - Pete from Tn on Sep 21, 2008, 12:18 PM

Please reread my post, Pete. I said moving seals were... - Steve in NC on Sep 21, 2008, 1:50 PM

Discovery 0.22 Tuneup (Edited by Mod) Expand Thread - Scott Turnquist on Sep 20, 2008, 2:32 PM

Big ED Expand Thread - george benson on Sep 20, 2008, 1:16 AM

Re: Big ED - Curt David on Sep 20, 2008, 1:32 AM

HDD. - george benson on Sep 20, 2008, 11:07 AM

Re: HDD. - Curt David on Sep 20, 2008, 4:47 PM

Actually, you might try contacting Airguns of Arizona. - Steve in NC on Sep 20, 2008, 5:52 PM

Going big time. Nice. How's Big Ed? - Mike in NC on Sep 20, 2008, 6:04 PM

I haven't heard from Ed for a couple of weeks - I assume he's fine. - Steve in NC on Sep 20, 2008, 6:35 PM

Re: I haven't heard from Ed for a couple of weeks - I assume he's fine. - george benson on Sep 20, 2008, 8:20 PM

I emailed him today just to say hello. He's still on that catch up - Mike in NC on Sep 20, 2008, 9:21 PM

Sure it's AoA??? - Greg in NC on Sep 22, 2008, 12:23 PM

Yup. Did you speak with Greg, as I suggested? nt - Steve in NC on Sep 23, 2008, 5:10 PM

Nope. Didn't filter through your subsequent post. - Greg in NC on Sep 23, 2008, 5:49 PM

Any news from Big Ed? - Nikolov Jivko on Oct 8, 2008, 3:32 AM

Unfortunately coms have gone dead - Greg in NC on Oct 12, 2008, 8:34 AM

Thanks for the info.... - Jivko on Oct 13, 2008, 2:57 AM

TKO LDC Expand Thread - glyconny on Sep 19, 2008, 7:32 PM

is it quieter then the MA one? - Adam on Sep 19, 2008, 8:48 PM

Re: TKO LDC - george benson on Sep 19, 2008, 8:56 PM

TKO is...... - glyconny@hotmail.com on Sep 20, 2008, 1:37 AM

Here is their website.... - glyconny@hotmail.com on Sep 20, 2008, 1:41 AM

Re: Here is their website.... - george benson on Sep 20, 2008, 11:25 AM

TKO - george benson on Sep 20, 2008, 3:17 PM

George.... - glyconny on Sep 20, 2008, 5:45 PM

Very quiet, but it seemed to affect my accuracy - Scott Turnquist on Sep 20, 2008, 2:47 PM

Agreed, Mike does a great job! - Greg in NC on Sep 20, 2008, 7:32 AM

1 2 3 4 5 6 7 8 9 10

Next >>

D I S C L A I M E R JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums from people under 18 years old, only with legal guardian(s) present.

Benjamin Discovery Forum