Return to Index  

Try this (no cost...no modifications)

March 26 2010 at 10:53 PM
robert  (Login gubb33ps)
YF


Response to Disco's bolt stays very loosely after closed

Once you load the pellet and close the bolt, pull BACK on the down turned bolt.

There is a little slack in the system (but is still sealed by the bolt probe o-ring). Normally we'll just close the bolt and turn the handle down, pushing all the slack to the FRONT...gun fires and pushes the slack to the rear. If you remember to tug that closed bolt back to the rear, removing the forward slack, bolt may stay down and not flip up when you fire.


Doesn't work on every one of them...but it's free and you don't have to cut/file/lathe anything to find out if it works on yours.



    
This message has been edited by gubb33ps on Mar 26, 2010 10:54 PM


 
 Respond to this message   
Responses


D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums from people under 18 years old, only with legal guardian(s) present.