Crosman/Benjamin PCP Forum

Click on the gun picture above to get the diagram and parts list - courtesy of Marvin

Yellow forum FLEA MARKET Off Topics Chinese GAMO Archives Classifieds Events FieldTarget HUNTING

A-TEAMs Tuning info Marauder Parts Diagrams

To become a new poster email your full name, city, State, phone number and your network54 login ID to Steve at eagleaetos@yahoo.com. Information does not get shared with ANYONE, just screening Trolls and makes you a member on all yellow forums.
The Forum dedicated to the exclusive discussion of Crosman/Benjamin Pre-charged Airguns

Visitors in this forum in the last 10 minutes: 7 Visitors
dan_house, 6 guests

Not logged in | Login | Create Account

Search Chat! Post

Crosman 180 Bolt Options Expand Thread - Marty on Nov 9, 2012, 4:00 PM

barrels...{Marauder}... Expand Thread - Alan Becker on Nov 9, 2012, 7:17 AM

Many of us do, thanks to Jim Gaska - Alan on Nov 9, 2012, 8:30 AM

Marauder .25 / non lead pellets? Expand Thread - Alan Becker on Nov 9, 2012, 7:12 AM

No non-lead pellets for .25... - Dave Dunn on Nov 10, 2012, 10:28 AM

.25 non Pb's... - Alan Becker on Nov 11, 2012, 2:14 PM

.25 non-lead - 21grains on Nov 11, 2012, 10:11 PM

What are othe people's marauders shooting Expand Thread - Dan hardwick on Nov 8, 2012, 2:03 PM

Re: What are othe people's marauders shooting - Scott on Nov 8, 2012, 5:26 PM

Where dd you get your regulator and did you install it yourself - Dan hardwick on Nov 8, 2012, 6:46 PM

Regulation - Scott on Nov 8, 2012, 11:59 PM

Squirrels, rabbits and an occasional possum ... - knt on Nov 9, 2012, 4:50 PM

My take - 21grains on Nov 9, 2012, 5:52 PM

Indeed BIg heads - Scott on Nov 9, 2012, 7:50 PM

My 25 cal. - Brian on Nov 14, 2012, 8:47 PM

My 177 Marauder - Johnnie Paul on Nov 16, 2012, 2:05 PM

50 Yd Outdoor Target: Spring or PCP Expand Thread - warren on Nov 7, 2012, 8:04 PM

Springer vs. PCP... - Hepotter on Nov 7, 2012, 9:04 PM

At 50 yards ... - Scott on Nov 8, 2012, 1:55 AM

Have both - Joe Dzekevich on Nov 8, 2012, 10:38 AM

PCP - WoodbineEric on Nov 8, 2012, 2:08 PM

get you one of these and put a Neil Clague - dave cole on Nov 8, 2012, 9:45 PM

MARAUDER! - mark on Nov 14, 2012, 9:40 AM

+2 on The Marauder - Johnnie Paul on Nov 16, 2012, 2:14 PM

Discovery and Tank or Maurader Package ? Expand Thread - warren on Nov 5, 2012, 7:35 PM

Get the mauarder - George Rapozo on Nov 5, 2012, 11:00 PM

Marauder with a fill tank - WoodbineEric on Nov 5, 2012, 11:37 PM

Crosman Scuba Yoke for tank ? - warren on Nov 6, 2012, 1:40 PM

which to buy - art on Nov 6, 2012, 6:22 AM

.22 DISCO and Pump - Joe Dzekevich on Nov 6, 2012, 11:03 AM

Re: .22 DISCO and Pump - Ahab on Nov 7, 2012, 1:49 PM

Get the Disco and modify it to suit your wants/needs. - David on Nov 6, 2012, 3:03 PM

I only plan on using in back yard and at club's indoor pistol range / no hunting. - WoodbineEric on Nov 6, 2012, 3:59 PM

Personally, I like the Disco better, but... - Crosmin on Nov 6, 2012, 4:32 PM

The Marauder....powerful.......QUIET! - Bill Dempsey on Nov 6, 2012, 5:21 PM

Pumping $cuks - 21grains on Nov 6, 2012, 7:20 PM

Guppy Tank great for outings but maybe to small for everyday use - WoodbineEric on Nov 6, 2012, 9:04 PM

2-8 $ per fill Guppy Tank - 21grains on Nov 8, 2012, 9:03 AM

guppy fill price - art on Nov 8, 2012, 6:07 PM

Nah, he ain't being "ripped off big time", he - David on Nov 27, 2012, 8:36 AM

marauders - art on Nov 8, 2012, 6:05 PM

True, true, but - David on Jan 5, 2013, 1:01 AM

True, true, but - David on Jan 5, 2013, 1:37 AM

The BStanley modification on my other 1720T.... Expand Thread - Dutch.22 on Nov 3, 2012, 9:17 PM

Oring for .25 Marauder Rifle Transfer Port - SIze Expand Thread - wafair on Nov 2, 2012, 4:22 PM

1/4"tubing @hwd store - dan yacovelli on Nov 3, 2012, 5:20 PM

So, just cut my own o-rings from the tube? thanks NT - wafair on Nov 7, 2012, 8:33 PM

Experimenting with LIGHTER hammers. Expand Thread - Scott on Nov 2, 2012, 3:09 PM

Built another even LIGHTER ... - Scott on Nov 2, 2012, 3:13 PM

Sear engagement point - Sam B on Nov 2, 2012, 5:51 PM

A Unique test performed today ... - Scott on Nov 3, 2012, 1:30 AM

what about shot count?? nt - Les on Nov 3, 2012, 12:55 PM

Shot count ... Not there yet ! - Scott on Nov 3, 2012, 3:36 PM

Test results on 28g full stroke hammer ... - Scott on Nov 4, 2012, 3:13 PM

I've been messing with lightweight strikers in QB 78's and - scot laughlin on Nov 5, 2012, 11:46 PM

Did you do an equivalent test with the stock hammer to compare? nt - John Lucas on Nov 4, 2012, 6:33 PM

Indeed ... - Scott on Nov 4, 2012, 7:16 PM

Scott...can you post a pic of the sleeved hammer?? nt - John Lucas on Nov 5, 2012, 9:00 AM

Pictures and more info here ... - Scott on Nov 5, 2012, 11:17 AM

Pop goes the prod Expand Thread - Tony in Puerto Rico on Nov 2, 2012, 3:09 PM

O-RING BROKE! - Hepotter on Nov 2, 2012, 4:36 PM

Broker my air gauge - WoodbineEric on Nov 6, 2012, 9:17 PM

I had to replace the crosman gauge 2x on mine. Using manometer fro JDSAirman now. (nt) - scott aka redboat on Mar 4, 2013, 5:12 PM

also check air guage - dan yacovelli on Nov 3, 2012, 5:29 PM

Pop goes the prod - Tony in Puerto Rico on Nov 5, 2012, 1:42 PM

That's the hardest leak to diagnose.... - bstaley on Nov 5, 2012, 8:40 PM

Pop goes the prod - Tony in Puerto Rico on Nov 5, 2012, 8:53 PM

again put soapy water on it. - dan yacovelli on Nov 5, 2012, 11:49 PM

Pop goes the prod - Tony in Puerto Rico on Nov 10, 2012, 11:31 AM

Crosman 1077 - Replacement? Expand Thread - Mach-1 on Oct 30, 2012, 6:31 PM

TalonTunes Marauder Reservoir Extension/shroud Expand Thread - Benjamin Martin on Oct 30, 2012, 8:32 AM

A bit of info... - Hepotter on Oct 30, 2012, 4:59 PM

RE: a bit of info - Benmartin on Oct 31, 2012, 7:48 PM

I installed one on mine. - dave cole on Oct 30, 2012, 6:33 PM

RE: - Benmartin on Oct 31, 2012, 7:49 PM

35 shots of 18.1g no poi change. Don't know about - dave cole on Oct 31, 2012, 9:04 PM

I`ve got about 3000 shots since HDD install - mark in mass on Nov 1, 2012, 1:30 AM

I'm about the same as Mark . . . . - Alan on Nov 9, 2012, 3:19 PM

Clague Air stripper, extra baffles - Benmartin_26 on Nov 7, 2012, 12:06 PM

Re: Clague Air stripper, extra baffles - Travis on Feb 5, 2013, 12:34 PM

Daisy 881 - Rebuild Expand Thread - Mach-1 on Oct 29, 2012, 10:15 AM

Re: Daisy 881 - Rebuild - Dick Tracey on Oct 30, 2012, 7:29 AM

Thank You - Mach-1 on Oct 30, 2012, 9:57 AM

Do I trust the PSI guage on the M-Rod or the PSI guage on my tank? Expand Thread - WoodbineEric on Oct 28, 2012, 11:22 PM

Re: Do I trust the PSI guage on the M-Rod or the PSI guage on my tank? - art on Oct 29, 2012, 6:31 AM

I'd go with the tank - dan house on Oct 29, 2012, 11:32 AM

If you always fill from that tank... - robert on Oct 29, 2012, 5:49 PM

which gauge to use? - art on Oct 30, 2012, 6:44 AM

What difference does it really make? - robert on Oct 30, 2012, 9:03 PM

what diff? - art on Oct 31, 2012, 6:15 AM

Could bring a 3rd gauge into play... - robert on Oct 31, 2012, 6:39 PM

Find your sweet spot and then........... - David on Nov 6, 2012, 3:27 PM

Anyone have any experience with the 1720T pistol?,And... Expand Thread - mark weyker on Oct 28, 2012, 9:17 PM

Re: Anyone have any experience with the 1720T pistol?,And... - Ron Shaw on Nov 17, 2012, 8:19 AM

QS for Steve in NC how many shots would the reg get in a Expand Thread - Joe in WV on Oct 28, 2012, 10:34 AM

I've done most of my Disco reg' testing in .22. But... - Steve in NC on Oct 28, 2012, 12:06 PM

PS: Forgot to mention that the test string above used an HDD. Absent that... - Steve in NC on Oct 28, 2012, 8:22 PM

How quiet is a .22 Discovery with AOA regulator Expand Thread - ScottB on Oct 27, 2012, 7:50 PM

I realize you'd probably prefer a comment from an unbiased observer, but... - Steve in NC on Oct 27, 2012, 8:46 PM

Re: I realize you'd probably prefer a comment from an unbiased observer, but... - ScottB on Oct 27, 2012, 9:21 PM

Marauder .177 baffles Expand Thread - PhengX on Oct 27, 2012, 1:22 AM

Yup ... - Scott on Oct 27, 2012, 11:34 AM

Thanks Scott - PhengX on Oct 27, 2012, 10:32 PM

Please school a newbie on a .25 Maruder LDC Expand Thread - Gary Mulholland on Oct 25, 2012, 11:56 PM

Re: Please school a newbie on a .25 Maruder LDC - Brian on Oct 26, 2012, 1:53 AM

ldc - art on Oct 26, 2012, 6:17 AM

MRod shroud/endcap threadsize...edited with proper size - Dave Ennis on Oct 26, 2012, 5:37 PM

ldc - Gary Mulholland on Oct 26, 2012, 9:34 PM

That is not the right size. - Neil Clague on Oct 26, 2012, 9:56 PM

Discovery on Co2 Low Shot Count? Expand Thread - Greg on Oct 25, 2012, 1:41 PM

My .20 Disco - Anthony R on Oct 25, 2012, 2:18 PM

Hard to judge the amount of co2 you get in.... - robert on Oct 26, 2012, 7:05 AM

Re: Discovery on Co2 Low Shot Count? - Greg on Oct 26, 2012, 2:08 PM

If you have - Anthony R on Oct 26, 2012, 4:14 PM

Short weight - robert on Oct 26, 2012, 5:24 PM

25 LB Tank - Greg on Oct 26, 2012, 6:12 PM

A bit of local research. - robert on Oct 26, 2012, 7:08 PM

Thanks for help & Info - Greg on Oct 29, 2012, 10:29 AM

.22 disco Expand Thread - Brian Elliott on Oct 25, 2012, 9:51 AM

Re: .22 disco - 21grains on Nov 4, 2012, 8:42 PM

Has Anybody Swapped The Factory .177 Barrel For a LW? Expand Thread - Johnnie Paul on Oct 25, 2012, 8:40 AM

I switched to a LW barrel after having accuracy problems with mine. - Ren on Oct 25, 2012, 10:01 AM

Not What I Wanted to Hear... - Johnnie Paul on Oct 25, 2012, 10:13 AM

I replace my .22 w/Jim G. barrel and couldn`t be - mark in mass on Oct 25, 2012, 10:07 AM

Re: I replace my .22 w/Jim G. barrel and couldn`t be - Johnnie Paul on Oct 25, 2012, 10:14 AM

$24 From Crosman... But Currently Out of Stock...nt - Johnnie Paul on Oct 25, 2012, 10:31 AM

what pellets and what pressure are shooting? - dave cole on Oct 26, 2012, 10:38 PM

Re: what pellets and what pressure are shooting? - Johnnie Paul on Oct 27, 2012, 9:11 AM

I have .177 barrels. Email me. nt - Mark G. on Oct 29, 2012, 5:56 PM

Email Snet Mark...nt - Johnnie Paul on Nov 16, 2012, 8:00 AM

Has anybody swapped the factory .25 barrel for a LW? Expand Thread - dave cole on Oct 22, 2012, 1:27 PM

Marmot_Militia cut mine to fit in caliber .25 - Hepotter on Oct 22, 2012, 8:24 PM

Those with M-rod .177..... Expand Thread - Mark on Oct 22, 2012, 12:52 PM

Mine shoots... - Jeff on Oct 22, 2012, 6:18 PM

Shoots MANY brands well ... Tho - Scott on Oct 22, 2012, 7:44 PM

Re: Those with M-rod .177..... - TomM on Oct 24, 2012, 10:07 PM

Mine works best with - PhengX on Oct 27, 2012, 1:05 AM

Re: Mine works best with - Ron Shaw on Nov 16, 2012, 9:36 PM

CHP 10.5 around 885 to 915 feet per second - WoodbineEric on Nov 6, 2012, 9:23 PM

Mrod tuner extraordinaire Expand Thread - LKB on Oct 22, 2012, 8:40 AM

Got an email? I did a search an no results. - Hepotter on Oct 22, 2012, 8:28 PM

Thank you for such kind words and high praise.... - Paul in N.TX on Oct 22, 2012, 10:10 PM

Shot string data from tune - LKB on Oct 23, 2012, 1:21 PM

Proof in the Pudding - LKB on Oct 25, 2012, 10:33 PM

Still more proof . . . . - LKB on Oct 27, 2012, 5:36 PM

Help with P-rod Expand Thread - David Seal on Oct 20, 2012, 5:00 PM

QD fill check valve - Hepotter on Oct 20, 2012, 6:43 PM

+1 - Jeff on Oct 21, 2012, 10:37 AM

Had the same thing happen - hfenn on Oct 21, 2012, 1:23 PM

O rings and spring Expand Thread - Gerald Bynum on Oct 20, 2012, 12:57 PM

Re: O rings and spring - bstaley on Oct 20, 2012, 5:30 PM

low power Expand Thread - Brian Elliott on Oct 18, 2012, 7:42 AM

Here's a 12 ft-lb .177 string... - Jeff P on Oct 18, 2012, 8:54 AM

Similar results with mine - Mach-1 on Oct 18, 2012, 5:01 PM

Re: Here's a 12 ft-lb .177 string... - Brian Elliott on Oct 18, 2012, 6:35 PM

Nothing special to done to the adjustments... - Jeff P on Oct 21, 2012, 1:17 PM

yep, LOTS of shot to be had at that Level! - bstaley on Oct 18, 2012, 9:34 PM

Re: yep, LOTS of shot to be had at that Level! - Brian Elliott on Oct 18, 2012, 9:44 PM

Just 3 little o-rings - bstaley on Oct 18, 2012, 10:14 PM

That is a nice string, but note that it came from an Mrod - not a Disco. So... - Steve in NC on Oct 19, 2012, 10:28 AM

And - Kevin on Oct 19, 2012, 1:19 PM

Thans damn impressive !! - Scott on Oct 19, 2012, 6:22 PM

Was it? LOL! Where (exactly) did the original poster say that? nt - Steve in NC on Oct 19, 2012, 9:51 PM

Re: Was it? LOL! Where (exactly) did the original poster say that? nt - Kevin on Oct 20, 2012, 4:58 PM

M-ROD Tuning Question - Striker Not Staying Put... Expand Thread - Tim McCloyn on Oct 17, 2012, 8:42 PM

I Think I Know What's Happening - Tim McCloyn on Oct 18, 2012, 12:03 AM

Something's not right. - bstaley on Oct 18, 2012, 9:42 PM

I' Sure You're Correct - Tim McCloyn on Oct 20, 2012, 9:58 PM

Re: M-ROD Tuning Question - Striker Not Staying Put... - Jobo on Oct 18, 2012, 5:38 PM

How hard is it to get to part 42? - WoodbineEric on Nov 6, 2012, 9:19 PM

Any one shooting any Cast Pellets/Slugs out of Expand Thread - crowpopper on Oct 16, 2012, 9:36 AM

Check it out on you tube....75 fpe from a .25 mrod... - Dutch on Nov 4, 2012, 6:54 PM

10 shot magazine problem Expand Thread - Monty on Oct 15, 2012, 7:47 PM

on my .25 magazine ... - knt on Oct 15, 2012, 8:48 PM

Update - Monty on Nov 3, 2012, 10:43 PM

Magazines - Frank on Nov 13, 2012, 1:22 PM

HDD 2250 Expand Thread - C on Oct 15, 2012, 1:18 PM

A good way to remove fill nipple from Disco without marring everything? Expand Thread - Quinton on Oct 11, 2012, 8:26 PM

Avoid the vise grips if you can. - Lloyd-ss on Oct 12, 2012, 12:40 AM

Thanks, I'll give that a try. nt - Quinton on Oct 13, 2012, 4:12 AM

THANKS FOR INPUT ON PELLETS. Expand Thread - JERRY on Oct 9, 2012, 11:04 AM

I was wondering if any one knows where I can find a Expand Thread - Bill B. on Oct 9, 2012, 1:15 AM

Nio videos but - Les on Oct 14, 2012, 3:19 PM

Thanks that was helpful the site you gave me,but now I - Bill B. on Oct 17, 2012, 12:20 AM

.25 cal pellets Expand Thread - Gerald Bynum on Oct 8, 2012, 8:36 PM

.25 cal Marauder Pellets . . . . . - MobyMyster in KS on Oct 8, 2012, 8:48 PM

X2 on the Benjamin Pellets - Hepotter on Oct 8, 2012, 10:00 PM

Sorry, I'm not familiar with the X2? - Gerald Bynum on Oct 8, 2012, 11:29 PM

X2 just means he agrees also on pellet choice. nt - Mark G. on Oct 9, 2012, 12:23 AM

pellets - art on Oct 9, 2012, 1:30 AM

* * NOT the Benjamin Destroyer * * I said the . . . . - MobyMyster in KS on Oct 9, 2012, 9:30 AM

pellets - art on Oct 9, 2012, 12:29 PM

Thanks for pellet info. - JERRY on Oct 9, 2012, 11:05 AM

Dittos For JSB Kings - Tim McCloyn on Oct 18, 2012, 12:41 AM

25 Cal Pellets - Larry on Nov 4, 2012, 2:37 PM

Who can re-seal, lube, tune a Sheridan "C" series... Expand Thread - franco carlo on Oct 7, 2012, 9:46 PM

That's **** specialty. Nt - J. Smith in Michigan on Oct 9, 2012, 12:40 AM

Working the BStanley mod on my 1720T prototype.... Expand Thread - Dutch on Oct 5, 2012, 3:42 PM

GMAC 22XX Heavy Spring - Hepotter on Oct 5, 2012, 5:08 PM

Goes to show you how different they can be. - Mark G. on Oct 5, 2012, 7:31 PM

I am trying to get 10.5s @ 700 fps.... - Dutch on Oct 5, 2012, 7:42 PM

Do you have the stock transfer port? - bstaley on Oct 5, 2012, 9:05 PM

I like your modification.... - Dutch on Oct 6, 2012, 1:13 PM

P-rod squirrel sniper (graphic) Expand Thread - hfenn on Oct 4, 2012, 7:33 PM

Nice work! - Gerald Knapp on Oct 17, 2012, 3:59 PM

.22 Mrod baffles Expand Thread - Maurice on Oct 3, 2012, 8:21 PM

No order in baffles... - Hepotter on Oct 3, 2012, 10:12 PM

Season of the Carbine Expand Thread - robert on Oct 2, 2012, 8:15 PM

Nice group... of carbines and on targets - ray in wi on Oct 3, 2012, 5:07 PM

Works for me! I took my first grey with my first - hfenn on Oct 3, 2012, 7:23 PM

So far: WORK 2 /LIFE 0 - robert on Oct 3, 2012, 8:54 PM

UGH! been there, done that, - DaveInME on Oct 5, 2012, 8:13 PM

Once every 7 weeks.... - robert on Oct 5, 2012, 9:48 PM

Re: Season of the Carbine - Monte on Oct 4, 2012, 10:32 PM

Kind of... - robert on Oct 6, 2012, 9:40 AM

M-Rod lost over 1000psi over night Expand Thread - WoodbineEric on Oct 1, 2012, 11:16 AM

I think the Fill Adapter ring is OK but suspect the PSI O-ring - WoodbineEric on Oct 1, 2012, 1:57 PM

strip down the gun and inspect each and every element. - Yang on Oct 2, 2012, 1:02 AM

Gulp - WoodbineEric on Oct 2, 2012, 8:27 AM

Two places where air is most likely to escape... - Hepotter on Oct 2, 2012, 9:21 PM

soap water - dan yacovelli on Oct 2, 2012, 9:22 PM

I think its the air gauge - WoodbineEric on Oct 3, 2012, 8:50 AM

New Gauge Ordered - WoodbineEric on Oct 3, 2012, 9:07 AM

It was the PSI Gauge... Thanks :) - WoodbineEric on Oct 15, 2012, 11:37 PM

Is it possible to improve velocity curve..... Expand Thread - Maurice on Sep 29, 2012, 6:38 PM

Three options..... - bstaley on Sep 29, 2012, 8:17 PM

The options I have considered.... - Maurice on Sep 29, 2012, 11:31 PM

This recent thread is about .25 cal, but the AoA HDD works just as well in .22 - Steve in NC on Sep 30, 2012, 12:40 AM

HDD concerns - Maurice on Oct 1, 2012, 4:26 PM

I don't see - Yang on Oct 2, 2012, 1:09 AM

I'll attest to the value of an HDD in a .22 - Alan on Oct 10, 2012, 7:57 AM

I agree with gassing the gun to a higher pressure..... - Timberhawk on Oct 14, 2012, 9:49 PM

Factory Refurb / .25 cal M-rods Expand Thread - Tim Schmidt on Sep 28, 2012, 3:46 PM

Kevin has them from time to time, contact him at - Barry on Sep 28, 2012, 11:00 PM

M-Rod, tuning question Expand Thread - WoodbineEric on Sep 27, 2012, 9:54 PM

Yep, too much spring pretension - bstaley on Sep 27, 2012, 10:27 PM

Made adjustments, new shot string, can you advise? - WoodbineEric on Sep 28, 2012, 12:02 PM

You've got it backwards..... - bstaley on Sep 28, 2012, 12:21 PM

Transfer port is open - WoodbineEric on Sep 28, 2012, 12:56 PM

Perhaps a little clarity... - Hepotter on Sep 28, 2012, 2:31 PM

I used the 1/4" wrench not the 1/8" like I stated in my last post - WoodbineEric on Sep 28, 2012, 12:37 PM

In that case.... - bstaley on Sep 28, 2012, 12:53 PM

Thanks! I'll try that - WoodbineEric on Sep 28, 2012, 12:57 PM

Trying to set the sweet spot - WoodbineEric on Sep 28, 2012, 4:50 PM

Re: Trying to set the sweet spot - bstaley on Sep 28, 2012, 10:05 PM

I got a curve with Spring Preload full ccw and Hammer Stroke full ccw + 2.5 - WoodbineEric on Sep 29, 2012, 12:26 PM

I was going to say that ........ - bstaley on Sep 29, 2012, 2:47 PM

Tried to duplicate your settings - WoodbineEric on Sep 29, 2012, 3:52 PM

Re: I was going to say that ........ - WoodbineEric on Sep 29, 2012, 5:40 PM

Looking Better - bstaley on Sep 29, 2012, 8:41 PM

I agree, shooting is more fun than tunning - WoodbineEric on Sep 29, 2012, 9:27 PM

Will Benji. be concidering making the Disco. in .25 cal. Expand Thread - Bill B. on Sep 25, 2012, 12:22 AM

I doubt it . . . - Alan on Sep 25, 2012, 3:19 PM

Your right about the cost. I was figuring it out,and - Bill B. on Sep 26, 2012, 1:07 AM

Re: Your right about the cost. I was figuring it out,and - Dick Tracey on Sep 26, 2012, 10:50 PM

Katana - Paul on Oct 1, 2012, 9:46 PM

Don't hear much about Katanas-I recently got one... - JohnL57 on Oct 2, 2012, 1:46 AM

Those do well plus - Paul on Oct 2, 2012, 7:34 AM

Depends on how much you do yourself. - Lloyd-ss on Oct 12, 2012, 1:24 AM

Need a Benjamin pcp QD fill cover??? Expand Thread - Hepotter on Sep 24, 2012, 6:54 PM

disco o-ring lube Expand Thread - ED on Sep 24, 2012, 11:31 AM

Go with the DOW - Anthony R on Sep 24, 2012, 7:46 PM

Bstaley Mod, 3 or 4 rings on a 177 M-Rod? Expand Thread - WoodbineEric on Sep 23, 2012, 8:36 AM

Use 3 #211 O-rings (same for all three calibers -nt - Alan on Sep 25, 2012, 9:38 AM

M-Rod with #10 spring, Bstaly mod and Regulator Expand Thread - WoodbineEric on Sep 19, 2012, 10:30 AM

Don't need a 10# spring. My shooting buddy has done - Mark G. on Sep 19, 2012, 10:41 AM

Have one just like your asking ... - Scott on Sep 19, 2012, 8:02 PM

"Was all this work worth it ... Don't know & don't care, love to tinker" LOL - John Lucas on Sep 20, 2012, 9:26 AM

Indeed ... but - Scott on Sep 20, 2012, 10:49 AM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Next >>

D I S C L A I M E R JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums from people under 18 years old, only with legal guardian(s) present.