<< Previous Topic | Next Topic >>Return to Index  

Just joined the "Dark Side"

July 10 2008 at 9:46 PM
  (Login jder30)
YF
UPS delivered my Disco from Straight Shooters today.
It's very niceeee!

I think I am going to do the 2-Stage trigger tune.

Do any one have pictures of the Power adjust mod
that's shows the adjuster and the adjuster inside the end cap as well?

TIA

"Ready on East side. Ready on the west side. Ready on the firing line....Gentlemen, you may begin firing"


    
This message has been edited by jder30 on Jul 10, 2008 9:46 PM


 
 Respond to this message   
AuthorReply


(Login pneuguy)

Here's the Big Ed version.

July 11 2008, 12:49 AM 





Steve

 
 Respond to this message   


(Login jder30)
YF

Thanks!

July 11 2008, 1:04 AM 

Can the power adjuster be made from parts that
you can get from a hardware store?

"Ready on East side. Ready on the west side. Ready on the firing line....Gentlemen, you may begin firing"

 
 Respond to this message   
Doug W
(Login dsdoug)
YF

Sure....

July 16 2008, 10:13 AM 

It's easy to make the adjuster. Find some nice brass knurled nuts, add a length of threaded rod, 8-32, I believe, and you are done. Red Locktite one nut to the end of the rod, cut off the excess part of the brass nut, leaving a knurled disc, for the locking nut. Done......

 
 Respond to this message   
Current Topic - Just joined the "Dark Side"
  << Previous Topic | Next Topic >>Return to Index  
D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums from people under 18 years old, only with legal guardian(s) present.