<< Previous Topic | Next Topic >>Return to Index  

Hammer stroke tight

March 13 2010 at 5:59 PM
  (Login linarestribe)
YF
Anybody here have a problem loosening the hammer stroke? Used a 1/8 allen and striped the allen. Any hints?

 
 Respond to this message   
AuthorReply
Johnny
(Login ShopShooter)
YF

Re: Hammer stroke tight

March 15 2010, 9:19 PM 

I broke the tip of my 1/8 allen off because the hammer stroke was already maxed out. Try turning it the opposite way.



Shopshooter

 
 Respond to this message   

REARSPROCKET
(Login REARSPROCKET)
YC

Re: Hammer stroke tight

March 17 2010, 8:24 PM 

Use a good fitting quality allen wrench and turn in clock/wise to break it loose since they are already backed out all the way from the factory.

 
 Respond to this message   
Current Topic - Hammer stroke tight
  << Previous Topic | Next Topic >>Return to Index  
D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums from people under 18 years old, only with legal guardian(s) present.